Anybody know of anyone that makes a pouch about the size of an x300 to attach to a molle system. It just rattles around my dump pouch now with my ear pro and just want a better way to secure it.
Wilson makes a slide on belt thingy for the M3. It might work if you cant find a good pouch. That’s about all the help I can offer.
Some type of grenade pouch might suit the purpose well.
Why isn’t it atached to anything?
Yeah, I’m curious about this as well. Being designed specifically as a WML, you would expect it to be mounted to something already.
Check maxpedition , my guess is you will score that.
I have a 6304DO for 34 and run my 34 and 17 w/ threaded barrel in it. And I use both guns with light on and off and always want to make sure I have a WML ready to go on my belt. 17 has been daily carry as of late with no WML, and is my primary pistol all around so I just want to have one handy - ready to rock as they say.
And two of them are already but are hard mounted to my rifles. One spare for 4 pistols.
Just thinking out loud, maybe a flashlight pouch for one of the smaller single CR123 flashlights? Like a Novatac? Or a pouch for one of those 2 ounce CS cans?
A single 203 round carrier would be too big. Hmmm.
Since you want it on Molle, that really cuts down on the options I can think of. You know a good rigger, or a local boot shop? I actually paid a local cobbler to do some sewing on some slings for me, all it cost me was some cigars.
If you brought them the materials and a rough drawing, they might be able to hook a brother up.
BFG’s Boo-Boo pouch…?
First Spear’s tourniquet pouch, or similar…?
They don’t appear to carry them any more, but Triple Aught Design used to have small pouches made for their AA/123A battery cases. 4-cell one was called the BC4, the 8-cell one called the BC8. I’ve three of the former, two of the latter, and have had them attached to the outside of a well-abused asault-type pack for 5 years.
The BC8 would probably be perfect, if available. Might be worth a call to see if they’re not made any more, or just available through another vendor.
See the detail photos… http://www.tripleaughtdesign.com/Equipment/Equipment-Accessories/Battery-Case
Maybe a BMF Ten-Speed single M4 pouch? It may not be the quickest to draw, but empty there will be no profile to the thing…
The Ten Speed single would work.
What about a HSGI pistol taco?
I was thinking of making something minimal out of kydex.
Didn’t want all that heat on the light, so I was going to make a duplicate out of dental plaster or acrylic.
If I get around to it soon, I will post a pic or two and see if it would work for you…
+1 for the kydex. You could then get the bladetech molle loks and attach it that way. I doubt the heat of the kydex (while making the holster) would damage the light as I have seen them mounted to an M4 FSP and that area gets pretty warm.
Is the 6304 on a war belt or are you carrying daily with it?