NEW BCM 16" SS Middy Barrel!

Just got some of the new BCM 16" SS middy barrels in stock! Below are pics and specs.

C4

SPECS/Features:

This BCM stripped barrel is machined from a 410 stainless steel. It features hand lapped button rifling with a 1/8 twist rate and polished M4 feedramps. As with all BCM barrels it is proofed (HPT) and magnetic particle inspected (MPI). To give the shooter the best balance of weight and accuracy this BCM Recce barrel has a mid weight profile and a mid length gas system. (410 stainless is a harder and more corrosion resistant than the conventional 416 stainless found in most barrels.)

M4 Feed Ramp Barrel Extension (Polished)
Mid Length Gas System
1/8 Twist Rate
5.56 NATO Match Chambers (USMC SAM-R Chamber)
410 Stainless Steel
Mid Weight Contour Profile Barrels
Button Rifled
Hand Lapped Rifling
HPT (High Pressure Test) Barrels
MPI (Magnetic Particle Inspected) Barrel

Plans to build some cool uppers with them?

Maybe so.

C4

Ok NJ, here is an upper I put together. I used the Fail Zero receiver and BCG. I really like how the SS and black rail offset one another.

C4

Any chance you can work up some groups through one of these barrels? I know the weather is atrocious in your neck of the woods right now but you are a hearty guy…

:stuck_out_tongue:

I have actually already shot one of these barrels and got some really good groups (.5) with BH 69gr MK’s.

I plan on shooting some more soon, but am headed off to the Hackathorn CQB course this weekend.

C4

Have a good time - I’ll be at work!

:eek:

I will think of you as I am shooting one armed terrorists. :smiley:

C4

Wow. Just wow. You know…I am a big Transformers fan and the new movie is coming. Engrave MEGATRON down the side and I might buy it. :slight_smile:

Grant,

Did I miss the low down on the Fail Zero receivers?

-RD62

Grant,
First off thanks for the speedy turn around on my order.

Second what are your thoughts on the Fail Zero vs the VLTOR MUR?

Grant, I assume that the Fail Safe BCG’s are GTG. What are the specs on these? Are you going to be offering these and if so, how much?

I am not sure. The FZ receivers are made by a USGI contractor company, have M4 cuts in them and are used by such companies as BCM, Noveske, G&R, etc. So they are GTG. FZ buys them in the white and then applies their coating to them.

They are VERY slick and add to the reliability of their BCG when coupled together.

C4

Both are quality I think. The MUR is going to be more precise, but the FZ upper is going to increase reliability (when you use their BCG).

C4

Yes they are. I know where they are getting the uppers, bolt and carriers and that company is extremely well thought of in the industry.

The bolts are MP’d and shot peened. They do not come with a black extractor insert and are not staked as well as we like, but we fix all that before we let them out the door. :wink:

According to C. Costa of Magpul Dynamics, his FZ BCG is able to run without lubrication. He recommends the product (as do I) and believe that this system might be the final piece of the puzzle for making an extremely reliable AR.

C4

Hey, that is my Rail!
I think I am getting it today Grant.

I want one of these BCGs. Can we order?

Yes you can. Please give us a call.

C4

Grant,

What’s the cost on those FZ BCG’s and who has them?

They’re $300 from Fail Zero.

good Lord, Grant!

I can’t take this torture any more. :eek:

:wink: