M4 "Loses" Dust-test

This is a copy & paste from the Army Times, reporting on a small arms evaluation mandated by Congress. Looks like our 40 year old rifle is showing its age.

Newer carbines outperform M4 in dust test
Army Times
By Matthew Cox - Staff writer
Posted : Monday Dec 17, 2007 6:42:21 EST

The M4 carbine, the weapon soldiers depend on in combat, finished last in a recent “extreme dust test” to demonstrate the M4’s reliability compared with three newer carbines.
Weapons officials at the Army Test and Evaluation Center at Aberdeen Proving Ground, Md., exposed Colt Defense LLC’s M4, along with the Heckler & Koch XM8, FNH USA’s Special Operations Forces Combat Assault Rifle and the H&K 416 to sandstorm conditions from late September to late November, firing 6,000 rounds through each test weapon.
When the test was completed, ATEC officials found that the M4 performed “significantly worse” than the other three weapons, sources told Army Times.
Officials tested 10 each of the four carbine models, firing a total of 60,000 rounds per model. Here’s how they ranked, according to the total number of times each model stopped firing:
• XM8: 127 stoppages.
• MK16 SCAR Light: 226 stoppages.
• 416: 233 stoppages.
• M4: 882 stoppages.

Reading further down the article…

Out of the 60,000 rounds fired in the tests earlier in the summer, the 10 M4s tested had 307 stoppages, test results show, far fewer than the 882 in the most recent test.

in the recent tests, the M4 suffered 643 weapon-related stoppages, such as failure to eject or failure to extract fired casings, and 239 magazine-related stoppages.

Who knows how biased or if the test was biased, but here are the numbers as far as I know.

Funny… I was just reading that. :slight_smile:

Here’s the full text and link:

http://www.armytimes.com/news/2007/12/army_carbine_dusttest_071217/

Newer carbines outperform M4 in dust test

By Matthew Cox - Staff writer
Posted : Monday Dec 17, 2007 9:25:16 EST

The M4 carbine, the weapon soldiers depend on in combat, finished last in a recent “extreme dust test” to demonstrate the M4’s reliability compared to three newer carbines.

Weapons officials at the Army Test and Evaluation Center at Aberdeen Proving Ground, Md., exposed Colt Defense LLC’s M4, along with the Heckler & Koch XM8, FNH USA’s Special Operations Forces Combat Assault Rifle and the H&K 416 to sandstorm conditions from late September to late November, firing 6,000 rounds through each test weapon.

When the test was completed, ATEC officials found that the M4 performed “significantly worse” than the other three weapons, sources told Army Times.

Officials tested 10 each of the four carbine models, firing a total of 60,000 rounds per model. Here’s how they ranked, according to the total number of times each model stopped firing:

• XM8: 127 stoppages.

• MK16 SCAR Light: 226 stoppages.

• 416: 233 stoppages.

• M4: 882 stoppages.

the results of the test were “a wake-up call,” but Army officials continue to stand by the current carbine, said Brig. Gen. Mark Brown, commander of Program Executive Office Soldier, the command that is responsible for equipping soldiers.

“We take the results of this test with a great deal of interest and seriousness,” Brown said, expressing his determination to outfit soldiers with the best equipment possible.

The test results did not sway the Army’s faith in the M4, he said.

“Everybody in the Army has high confidence in this weapon,” Brown said.

Lighter and more compact than the M16 rifle, the M4 is more effective for the close confines of urban combat. The Army began fielding the M4 in the mid-1990s.

Army weapons officials agreed to perform the test at the request of Sen. Tom Coburn, R-Okla., in July. Coburn took up the issue following a Feb. 26 Army Times report on moves by elite Army combat forces to ditch the M4 in favor of carbines they consider more reliable. Coburn is questioning the Army’s plans to spend $375 million to purchase M4s through fiscal 2009.

Coburn raised concerns over the M4’s “long-standing reliability” problems in an April 12 letter and asked if the Army had considered newer, possibly better weapons available on the commercial market.

John Hart, a spokesman for Coburn, who was traveling, said the senator was reviewing the test results and had yet to discuss it with the Army.

The M4, like its predecessor, the M16, uses a gas tube system, which relies on the gas created when a bullet is fired to cycle the weapon. Some weapons experts maintain the M4’s system of blowing gas directly into the firing mechanism of the weapon spews carbon residue that can lead to fouling and heat that dries up lubrication, causing excessive wear on parts.

The other contenders in the dust test — the XM8, SCAR and 416 — use a piston-style operating system, which relies on a gas-driven piston rod to cycle the weapon during firing. The gas is vented without funneling through the firing mechanism.

The Army’s Delta Force replaced its M4s with the H&K 416 in 2004 after tests revealed that the piston operating system significantly reduces malfunctions while increasing the life of parts. The elite unit collaborated with the German arms maker to develop the new carbine.

U.S. Special Operations Command has also revised its small-arms requirements. In November 2004, SOCom awarded a developmental contract to FN Herstal to develop its new SCAR to replace its weapons from the M16 family.

And from 2002 to 2005, the Army developed the XM8 as a replacement for the Army’s M16 family. The program led to infighting within the service’s weapons community and eventually died after failing to win approval at the Defense Department level.

How they were tested

The recent Aberdeen dust test used 10 sample models of each weapon. Before going into the dust chamber, testers applied a heavy coat of lubrication to each weapon. Each weapon’s muzzle was capped and ejection port cover closed.

Testers exposed the weapons to a heavy dust environment for 30 minutes before firing 120 rounds from each.

The weapons were then put back in the dust chamber for another 30 minutes and fired another 120 rounds. This sequence was repeated until each weapon had fired 600 rounds.

Testers then wiped down each weapon and applied another heavy application of lubrication.

The weapons were put back through the same sequence of 30 minutes in the dust chamber followed by firing 120 rounds from each weapon until another 600 rounds were fired.

Testers then thoroughly cleaned each weapon, re-lubricated each, and began the dusting and fire sequencing again.

This process was repeated until testers fired 6,000 rounds through each weapon.

The dust test exposed the weapons to the same extreme dust and sand conditions that Army weapons officials subjected the M4 and M16 to during a “systems assessment” at Aberdeen last year and again this summer. The results of the second round of ATEC tests showed that the performance of the M4s dramatically improved when testers increased the amount of lubrication used.

Out of the 60,000 rounds fired in the tests earlier in the summer, the 10 M4s tested had 307 stoppages, test results show, far fewer than the 882 in the most recent test.

in the recent tests, the M4 suffered 643 weapon-related stoppages, such as failure to eject or failure to extract fired casings, and 239 magazine-related stoppages.

Colt officials had not seen the test report and would not comment for this story, said James Battaglini, executive vice president for Colt Defense LLC, on Dec. 14.

Army officials are concerned about the gap between the two tests becaus the “test conditions for test two and three were ostensibly the same,” Brown said.

There were, however, minor differences in the two tests because they were conducted at different times of the year with different test officials, Brown said. Test community officials are analyzing the data to try to explain why the M4 performed worse during this test.

Weapons officials pointed out that these tests were conducted in extreme conditions that did not address “reliability in typical operational conditions,” the test report states.

Despite the last-place showing, Army officials say there is no movement toward replacing the M4.

The Army wants its next soldier weapon to be a true leap ahead, rather than a series of small improvements, Brown said.

“That is what the intent is,” he said, “to give our soldiers the very best and we are not going to rest until we do that.”

Col. Robert Radcliffe, head of the Directorate of Combat Developments for the Infantry Center at Fort Benning, Ga., said the test results will be considered as the Army continues to search for ways to improve soldier weapons.

For now, he said the Army will stick with the M4, because soldier surveys from Iraq and Afghanistan continue to highlight the weapon’s popularity among troops in the combat zone.

“The M4 is performing for them in combat, and it does what they needed to do in combat,” Radcliffe said.

Definitely highlights the need for an improved magazine.

I just threw all my ARs out.

I hope the politicians realize there is more to a rifle than how it performs on one test. Speaking to those who have tested all four rifles, the XM8 by far is the worst of the four rifles all around, even if it performed best in the sand chamber. I would hate to see it adopted just because of this one test.

882 out of 60,000?

If so, that is a failure rate of 1.47% which, on the surface, sounds entirely reasonable. Also, I do not see an indication of the dispersion of the events. One of the M4’s could have been a “problem child”, and taken the lion’s share of the 882 failures. Not sure though…

If the 416 makes it lower, then I can understand why Army/Delta would want something that fails less.

The sand box is a very hostile envirerment, perhaps it would be better and cheaper to melt all the sand into glass and start over.

Where are my Math guys at?? Break out you calculators for me…
If you fire 60,000 rds and have 882 failures, as Shivan states, you have a 1.47 failuer rate.

What if you are only carrying 210 to 300 (sih) rds. (in point of fact is much more realistic for the current fighting man) What would the estimated “failure rate” be then?

Where I think this finding is interesting, I think it has a down side. The uneduacted novice reading that or watching it on the news “cries out” for a change that in not neccesarily requierd, albiet nice to have.
I’ve stated it before, the majority of real shooters don’t really have an issue with the M4. Would a 416 or a SCAR be “better”, sure, maybe, but when you hear these types of reports you picture Joe brassing it out with Haji screaming “I wish I had a gun that works!?” That is very much not the case. Not even close.
Matt

Keep in mind, this is not a report, its copy of what a staff writer did. The report is much more detailed.

I expected to see more similar results between the 416 and the M4, what with internal tolerances and such being identical, as well as the previous test results.

I am a bit suprised that they used proprietary magazines (as implied by the statement that the M4 had 239 magazine related stoppages), or would fault the magazines during the test. It seems that by using different magazines in each weapon induces 4 new variables to the test.

If nothing else this has given requirements writers an idea of what is possible as far as mean rounds between stoppages or net stoppages in adverse conditions. If a fair and open competition was held with specific requirements laid out I am sure that Colt would make improvements to their system to meet the contract requirements. Colt cannot change the M4 without a new government contract, even if they know that a change will improve performance.

I just hope that the requirements writers take the right advice and request the right things.

I think the reasoning behind that is, they wanted to test the weapons as they come from the manufacturer. The magazine is a part of the system (or major parts groups) so to take them out and use the standard “GI” type magazine would take away form each system and its individuality.

Agree to a point. Since the requirement for the weapons to operate with standard GI mags is (or was) present in the requirements, it stands to reason that they are expected to perform with those GI magazines in hostile environments. We all know that standard issue GI mags have issues, and room for improvement is vast (MagPul makes a little bit of money from improving GI mags I hear).

It seems to me that since the lowest common denominator is the GI mag, they should have at least been included in the testing for each weapon.

But, they weren’t, and regardless of how I feel about that relatively insignificant issue, we have some good data on what to expect out of weapon performance. 882 compared to 127 is a pretty large gap, and closing that gap should be on the short list of weapon improvements.

The Army is trying hard to spin this one. As Brett states, the actual report goes into much more detail. The M4 did NOT do well in this test. The 416 did better than indicated, as there was one problematic 416 that had numerous failures, while the other nine 416’s ran better than XM8. Note, that while the XM8 is a POS, that I despise for many reasons, it does have a good reliable gas system.

Hopefully this will induce a lot of people to sell their pathetic AR-based carbines for attractive prices. :smiley:

Now granted it been a long time since I took Stats classes in university - but IIRC the sample size (N) is suppose to equal greater than 32 for a “better” (here is me not being currenent is stats) accurate rate in the test.

Thus to me they should have tested 32 M4A1’s, 32 Hk416’s, 32 Mk16, and 32 XM-8

  • the mags should be standard- as should whatever else can be.

More realistically they should have had sub variants of systems as well
4 subsets of the Hk416
Hk416 system (Hk lower and Hk mag)
Hk416 - Colt M4A1 lower - USGI-MAG
Hk416 - Colt M4A1 lower - Hk Mag
Hk416 - Colt M4A1 lower - PMAG
Becuase realistically the beauty of the Hk416 is you can just buy the upper and drop it on an in service lower.

So by Kev’s math the testing should have been

Colt M4A1 (baseline) USGI mags (all testing done with 32 units of each subset)
M4A1 - Hk Mag
- PMAG

XM-8 - HK mag
- USGI mag
- PMAG

FN Mk16 - FN Mag
- USGI Mag
- PMAG
- Hk Mag

Hk 416 - Hk lower - Hk mag
- Colt M4A1 lower - Hk mag
- Colt M4A1 lower - USGI mag
- Colt M4A1 lower - Pmag

Doc or Brett -

Any pointers for .mil to the complete test reults?

Erick

I’m SELLING all mine to other suckers… see EE soon. :stuck_out_tongue:

Going back to FAL…

Rmpl

I agree. That isn’t a bad average. I am also willing to bet that the Mag is accountable for about half of the stoppages and the extractor spring/insert claimed a good portion of malfunctions as well.

C4

The Big Army does NOT want the real test results to be seen–the dog and pony show by Brown and the other usual suspects today was a joke.

I just got copes late last week of a couple, I wish I could share it but, its a confidential report as of now. I hope you understand.