Lima 6 build

Always thought belt feds were a bit like bj’s. Yes please….I’ll take one. Then along came semi auto belt feds. Kinda like a bj….from a dude. Thanks, but no thanks. No judgement. Just not for me.

Enter the era of forced reset triggers and safeties. This is where the analogies end. Don’t want to get myself in serious trouble, or learn something about myself I don’t want to know. I started w/ a Hydra stripped lower.

Once in my possession & SBR’d, I added a LMT 308 receiver extension, Vltor stock, springco orange spring, H3 buffer, Colt lpk, Redacted Arms super safety, Dremelsmith L6 Hydra adapter, & a B5 grip.

I then scoured the internet for an in stock Lima Six 12.5 complete upper receiver w/ inconel gas tube. I consider myself somewhat patient, but didn’t want to wait unnecessarily. Shout out to Panther City Tactical. Never heard of them before this endeavor, but they were 100% legit, and on point w/ shipping.

From the “factory”, the Lima Six uses a noncollapsible feed stud. This means the bolt has to be locked open in order to close the top cover. Dremelsmith makes a collapsible feed stud, & I bought it. This allows the top cover to be closed regardless of bolt position. Not convinced it was a necessary upgrade, but I got it just because I could.

Top cover is sporting a cheap Vortex red dot until I decide what I want permanently. Rail covers are a couple of P&S I had laying around. Muzzle is sporting an AAC 18t flash hider w/ M4 1000 can. Why? Because it’s a little dated, & I quit caring about it more than a few yrs ago. Nutsack is from Tribe Tactical, and is of the 100rd variety.

Put all of this together, & we have a closed bolt, di / internal piston / whatever, non quick change barrel, reciprocating charging handle semi automatic belt fed firearm.

If anyone cares about my rationale behind each part, here we go. I used the Hydra lower specifically for the Dremelsmith L6 adapter. I wanted that L6 adapter because of the dropped link opening machined in, and the location & operation of the bolt hold open / release.

I like LMT’s receiver extensions. Stocks & braces always seem to fit pretty tight, & the extra holes seem like a good idea to let water and / or air escape. I went w/ the 308 version, so I could use a standard H3 buffer. If that doesn’t make sense, the L6 upper is 3/4” longer than a standard AR15 upper. The Lima Six website lists all of the recommended combinations of receiver extensions, buffers, & action springs.

Colt lpk’s have been mostly consistent for me. Parts involving a detent are crisp, & I trust materials to be acceptable. Last couple I bought would not release hammer from disconnect to sear initially. An evening on the couch doing a poor mans trigger job smoothed everything out. Probably other options as good as & maybe something better, but I don’t have the time & money to try them all.

Never heard of Redacted Arms. I wanted the crossbolt style super safety, & a lgs had it in stock. Overpaid by a little, but I try to spread the love. Hydra lower has a M16 pocket, so the lever had too much side to side play. A friend w/ a 3D printer whipped me up a centering block.

As far as furniture goes, I’ve been wanting to try the B5 grip. I like it so far. Texture and angle are nice. Always been a Vltor fan. Very comfortable, durable, & somewhat the underdog this day and age. Will very likely swap the imod for an emod.

Lima Six upper was used because of the price & growing aftermarket support. It’s not cheap or inexpensive, but it does cost less than competing options. Several companies & entrepreneurial individuals are working on solutions to address any real or perceived shortfalls.

At this point, you’re probably wondering how it runs. So far, really good. They recommend a 200 rd break in. My spidey senses usually tingle when I hear that kind of nonsense, but it made it through w/ zero malfunctions.

As I mentioned above, the Vortex is a place holder. Haven’t decided what I really want to use as an optic. Other than that, only thing really left to work out is a set of irons. Easiest solution will be a rail mounted front sight and a LPA adjustable ghost ring rear.

I’m not sure where it stands as a weapon, but as a toy, I enjoy playing w/ it. I could’ve said a lot less or a little more. If anyone has any questions, just ask.

I’ve never heard of 95% of this project. But it looks like a cool project! My only thought is that there are way less gassy cans now compared to the M4-1000. I still have 2 of them, but they’re so heavy and gassy, they’re just safe weights now.

I hear ya regarding the can. Lima 6 upper does have a riflespeed gas block. Helps w/ gas, but obviously doesn’t do much for weight. Figured my feelings won’t be hurt if belt dumps wear it out, or it spins off the mount & launches.

When will you get to shoot it?

Waiting for an update on how it shoots…