Help with choosing an ampoint?

Okay fellas, I’m about to buy a aimpoint red dot sight for my AR15. I can decide to get the M4, M3, or M2. What are the pros and cons of each. This gun is going to be a home defense weopon, plus a “shit hits the fan” type of weopon.

I also plan on getting a DD omega to free float the barrel as well.

Any input for u fellas?

Oh yeah, another thing. Will a standard mount work with a magnifier, or should I go with th other cantlever mount?

Much help is appreciated! Thanks in advance.

SHTF and magnifier use…I’d go with an Aimpont M4S. There is no better choice.

.

What is the gun going to be used for? What make is the gun?

.

un

gun i a stag, and has everything down to make it reliable, staked arrier key…etc

the gun is going to be used for range work mostly. But I also want a gun that could be used for home defence, zombie invasion, etc…You know the deal

I just dont want to buy an M4, when an M2 would work perfectly for my intended use.

And please fellas, I;ve narrowed it down to those selection only.

Although I might give a hard look at EOtechs.

I also plan on intalling a DD omega to fre-float the beast

I personally would look at that new aimpoint pro which runs for around $440 IIRC or an aimpoint Comp C3. Both of these optics have similiar capability to the pricier aimpoints with the exception of night vision capability.

If you want a smaller and lighter optic I would check out the compact aimpoint H-1 or T-1.

are the H1 or the T1 as rugged or reliable as the others? This idea intrgues me because I could also use this as a mount for my .22 steel gun, or use it with an offset mount with a full 3-9x scope.

It would probably reduce weight as well.

And please excuse my ignorace, im usually a 1911 guy:)

Check out the chart by rob_s for the differences between the Aimpoint models…

http://spreadsheets.google.com/pub?key=pwswheghNQsFFHwq_KhEISQ&output=html

Just my opinion, but if you are not planning on using nightvision or taking your rifle scuba diving then the best bang for your buck Aimpoint model is the C3.

I do not know if the H1 or T1 are as rugged as the others. That said, I do believe the aimpoint is on average the most durable red dot sight on the market and I would be very confident using a H1 or T1.

FWIW, I have a Comp C3 and I have been extremely happy with the sight.

I would get the M4s. Rugged, extreme battery life, proven.

You really can’t go wrong w/any Aimpoint.
However, if weight is a prime consideration then look at one of the Aimpoint Micros. However, their 3.4moa dot isn’t ideal for use w/a magnifier.
You can get a 2moa dot w/the C3 or new Pro w/out spending a ton of cash.
My personal favorite is the CompM4 due to its ruggedness (arguably the most rugged Aimpoint currently made), battery life (80,000hrs), common AA battery usage, 2moa dot and decent QD mount w/detachable riser.
HTH, keep us posted…
Tomac

If you have to ask the question, then I would say to go with the PRO, as it is going to deliver the most capability for the most reasonable price of admission.

You can look beyond the M series to the T if this suits your needs, but those don’t seem to be terribly well-defined at the moment. If you’re set on an M series optic, and want the best available unit regardless of price, then you’ve just made the case for the the M4s; that said, it sounds like you’re just looking for a rock-solid RDS to get started, and the PRO is going to deliver quite well in that department.

AC

Only downside to the M4S is that the location of the rotary switch makes it difficult to access when using a magnifier. Also, w/the M4 you can reverse the mount to place the QD knob on the right if desired, can’t do that w/the M4S.
Tomac

Okay fellas go advice, i sureloy apreciate it. My next question is, where is a good website to purchase these? I would like to get the comboe with the optic and the mount.

thanks in advice guys, you"ve been much help!

I would check out either aimsurplus.com or GR Tactical www.grtactical.com.

G&R has good prices on Aimpoints. They were the cheapest I found when I bought my ML3.

okay fellas i’ve changed my mind. Instead of going with a red dot optic…= think im going to get a good Buis. I would like one the is adjustable for windage and elevation. should i go with the lmt or a carry handle rig. tjis way i can save money and work on fundlementals. sorry if this is the wrong forum

Why are you adjusting your rear sight for elevation? This is done at the front sight with the AR system.

For my forray into irons-only recently, I chose the Tory Industries Fixed Rear Battlesight. My criteria were
[ul]
[li]non-folding[/li][li]non-throwlever[/li][li]same-plane rear aperture[/li][li]windage-only adjustment[/li][li]one-piece body[/li][/ul]

reason being it that I find it a pain in the “you know what”, pluse I got my front post as about as high as it would go in order to sero my stag at 50yrds with my A.R.M.S #40. I am not to found of this sight. Hope that makes sence

You’re solving the problem incorrectly. The problem is that your Stag has the wrong front sight base for a carbine-length gas system. What you need is a taller front sight post. If you have excessive elevation adjustment in the front you may simply wind up bottoming out your new “elevation adjustable” rear and still have the same problem.

I would suggest fixing the problem the right way, with the taller front sight post.

I got my Aimpoint Comp M2 in a package deal at SKDtactical. It was a limited run deal for $500. I got the sight plus a LaRue LT-150 in one package. There are packages to be had at GG@G and maybe BCM.
Good luck!!