Glock Grip Reduction

I would like to hear some thoughts on glock grip reduction. I am considering doing it my self, but if yall think it would be better to send it off please let me know. Other than that I would just like to hear whether you like it or not, and the advantages / disadvantages of this. Also any pics. would be great just to give me some ideas.

The only disadvantage to grip reduction is that it could potentially reduce the durability of the weapon. However, the upside is that you can make the weapon feel much more comfortable in your hands. As for doing it yourself, I’d say that your skills at doing things like that need to be evaluated by you objectively. Do you really think you can do it and not have it turn out like crap? If so then go to it. If not send it off.

#1. A great deal of research and planning went into Glocks design and the ergonomics were designed correctly so unless there is an issue with your hand, it GTG as is. It works fine for millions of men and women operators around the world. When is the last time you you heard of someone doing a grip reduction on a Browning HP or any metal frames gun? If the gun doesn’t feel right in your hand I’d suggest you buy something else.

#2. It will be worth considerably less if you decide to sell it.

#3. FWIW my suggestion is to leave it stock

Mario I have a BHP with a modified grip. Glocks are known to be hit or miss with ergonomics. I’m glad they work for you. For me, they point low, have horrible finger grooves and if I don’t have a beavertail I get stripes on my hand. My lone Glock has a Robar-ized grip and shoots much better for me than a similar large framed Glock. OP, if you want to, do it. It’s a $450 piece of polymer not a priceless artifact.

I’m all for taking a gun and hacking at it until it submits to my will.

Glocks do not fit everyone well and the wide realization of this truth led to lots of people offering custom grip work on them. I’ve handled grip mod jobs on polymer guns done by Robar (done on a few Glocks) and Bowie Tactical. Both were significant improvements over stock, in my opinion.

The advantages of a grip reduction is making the Glock fit you better. The disadvantage is cost and permanent modification of the weapon. I don’t really know what a mod like a Bowie grip job does to the resale value of the weapon…but that’s partially because I don’t usually see people getting rid of them once they get the weapon to fit them better.

I could really care less about resale value, I dont sell my guns. I mainly shoot sigs an 1911’s, but I have lots of glocks and I want to be able to shoot them better or at least make them feel better in my hand. I feel that I might like them more if it wasn’t for that big ol’ hump in the back.

I’m not sure I subscribe to the notion that you should just pick something else other than a Glock if you like every other feature except the grip. I tried a lot of other things that ostensibly fit my hand better, but I didn’t shoot nearly as well as a Glock. In the end, I chose a reduction to compensate for Glock’s only apparent weakness (no handgun is perfect) and I’m very happy with the performance.

As for the hump in the back, in getting rid of it, I think you drop the muzzle a degree or two that makes the Glock an excellent pointer. People customize firearms all the time. If a production model worked perfectly for everyone, than forums like this wouldn’t even be necessary. It can weaken the frame so you have to have someone who knows what they’re doing. That said a little reduction goes a long way.

You can get a customized Glock for less than stock models of other high-end manufacturers.

Respectfully disagree with just about everything above. I do agree that a lot of research goes into design. The goal, though, is to fit many hands good enough, not few hands perfectly. Glock doesn’t care about my individual preferences; only I do.

Grip reductions are done on metal framed guns. It is a modification that is offered by many gunsmiths. Ned Christiansen incorporates this feature in a lot of his 1911. I have one of his guns, and I like what this feature offers.

I also own a Glock 19 with grip reduction by David Bowie. I considerably prefer grip-reduced Glock over stock. Again, it is an individual preference, but a strong one.

As far as resale value is concerned, considering that Ned doesn’t accept orders and waiting time for David is almost 8 months, I am positive that I can not only get my money back, but even make a profit. Only I am not selling…

I carried a Glock 21 for years on duty, and the grip always bugged me. I sent it off to Arizona Response Systems for a grip reduction. It made a big difference. The backstrap was straightened out, under cut the trigger guard a bit and refinished.Then when I was happy with that, I dumped it for a 1911…:smiley:

Let ROBAR do a tricked out CCF frame (alloy or ss) for you! Check out the Jan/Feb 2009 American Handgunner issue. Aloha!

I’ve carried customized 1911s for over 30 yrs. & & one mod I use is a flat mainspring housing. Even though a 1911 so modified is GTG for me, I’ve found that I strongly prefer a slimmer, reduced 1911 grip.

I have large hands & tried very hard to accept the Austrian whore as-is, right from the box. I found that decades of training, practice & muscle memory associated with 1911s, causes the whore’s front sight to index higher during the draw stroke. Also, the flesh of my dominant hand, between the thumb & forefinger, rides up over the rear of the Austrian frame causing severe lacerations & leaking of fluids before the first magazine is expended Choices had to be made & I chose to reduce the Glock grip frame.

I’ve known David Bowie a long time & remember when he first started modifying these. He does first-rate work & is strongly recommended. However, I’ve been modifying my own weapons since the mid '70s & a grip reduction is easily accomplished with the right combination of knowledge, good judgment, tools & materials. Mine have a very fine stippling to reduce clothing & flesh abrasions for CCW use. The end result is a whore i can live with without my having to learn new tricks - the old tricks still work just fine with this old dog.

Here’s a first year production G19 with grip reduced & frame shortened to G26 length, a G22 reduced & shortened to G27 length & a reduced G19. The second photo is a closer view of the full sized G19. Not great photos, but you get the idea.

Did my own on a 19. Highly recommended. Heat and roll to flatten backstrap. Dremel and soldering iron.

I have done few for other guys in my Department. Just take your time.

Limey,

Looks great. Do you have a set of good instructions? I know you made it seem pretty simple, and I think I get your general idea. I’d just like a formal set of instructions rather than guessing.

Thanks in advance,
J.

I’m not sure why anyone would buy a gun that didn’t feel right in their hands, but if you have a Glock and you can’t maintain a decent grip then I would either sell the gun or attempt to have it modified.

When I purchase a pistol, the first and most important factor for me is how comfortable the gun feels in my hands. Sounds like a lot of people buy guns because they “look cool” or they are “fan boys” of the brand. At least there are options out there though for modifying guns. Personally, I would have put my money on the purchase of a handgun towards one that fit right to begin with.

Actually my experience is quite the reverse and I know that many others have experienced the same. I’ve bought lots of guns that felt great in my hand only to shoot like shit.

I try other guns, but then I keep coming back to the Glock, which is otherwise perfect for me with a slight grip reduction.

People have been customizing handguns for a long time. If a production pistol fit everyone’s hand a lot of gunsmiths would be out of work.

Buy an M&P and be done with it.

Actually I did…then I traded it for another Glock 17.

I own a Glock 23, and I personally love the grip as is.

I’m quite sure that you and I have different physical makeups.

When speaking of any handgun, one size does NOT fit all.

The Glock is perfect for me in just about every other aspect. A minor modification, especially one I can do myself, is a small price to pay.

I have “little girl hands”. :wink: