CAA Micro Roni Stabilizer, Gen 3 Glock 23

Well, it came in last week. Just assembled it this evening. It is designed to supposedly shoot faster and at a longer distance more accurately. The bottom of the frame opens and you just place the bolt adapter to the rear of the Glock. There are three rails which can accommodate BUIS, lights, red dot, laser, whatever.

I’ll have to let you know how it does at the range.

The rear stabilizer is just like the Sig Arms stabilizer, which folds forward for ease of storage.

I acquired it from YRS, Inc who give a discount just for becoming a registered customer.






Sent from my iPad using Tapatalk

I have to admit ignorance, but what’s the point? Is the barrel lengthened with an aftermarket barrel, or is it just an arm brace and foregrip “adaptor” for the stock pistol?

No problem.

This version is the latter. I suppose the arm brace is to help with control, increased distance. But I haven’t tried it out to see what advantage if any the NFA version will give me. I’m going to zero the red dot for 50 yards and see how I do with it.

The NFA version has an actual stock that is supposed to help with more control, increased distance and faster rate of fire. It also has a magazine holder for a spare.

Sent from my iPhone using Tapatalk

Thanks. I’ve seen them before but never could figure a use for my goals. Good luck and look forward to your thoughts.

I was at SHOT Show back in 2010/2011 when I believe the original was released.

The booth rep explained that it was marketed toward security personnel in other countries that were restricted in how many or what type of guns they were allowed to have and it basically allowed the user to set up a semi-auto machine pistol/smg with only a pistol.

Having a shoulder stock for stability as well as being able to mount an RDS, sling, flashlight or laser while still using the same magazines as your pistol. IIRC the handguard portion was deliberately left large enough to fit a suppressor if available.

For the US market, I think it has some merit as a SHTF gun. Rather than having a separate “truck gun” like a Kel Tec Sub2k you could just leave the Roni in the vehicle or in your bag while still CCW’ing a Glock 19 and utilizing the same magazines. Also, if your vehicle gets broken in to, you wouldn’t have the risk of someone stealing an actual firearm.

If things got really crazy (like LA riots crazy) you could snap the G19 in and have a lot more capability to hit at distance or at least PID targets with the right optic.

So looking into this chassis, if a person orders the G19 version they can’t use their 17 in it and vice versa?

They have model specific ones. So the spectrum of G19/23/32 and G17/22/31 are examples. They’re not limited to Glock. They also have shells for Beretta, Sig Sauer, CZ, M&P, HK.

Sent from my iPhone using Tapatalk

CDR_Glock,

How’s the length of pu… er, cheek weld on that thing? How does it balance?

…

Their website is mildly confusing as far as the Roni models line-up, but I assume this is the one mentioned in the OP, selling for–wait for it–$395 MSRP.

I like the idea of a T2 RDS and cheek weld on a non-gun shell that I could leave in my truck but I’m trying to figure out where I would want this over my burner ghetto-fab $500 11.5" 5.56mm AR pistol.

I acquired it from these people who take 10% off when you register and there’s no tax or shipping:

http://www.yrsinc.com/en/micro-roni-stab-caa-tactical-micro-stabilizer-roni-for-glock-19-23-32-glock

I paid $329. These ship from Israel so it takes 3-4 weeks (mainly because of customs on both sides).

When you factor in the price of a Glock 23, which I paid $389 in 2008. Most of the video demos you see are with 9mm. I’ll be doing a 40 S&W which will be a touch more snappy. There is a compartment in the bottom that allows you to remove the pistol easily.

I placed a Light on the left rail which should help with gripping it for more control. It will be better than the thumb rests that they sell on the site for $20.

I’ll get to shoot it this weekend.

Sent from my iPhone using Tapatalk

Comparison of the CAA with the Tavor and the AR-15 pistols.

Sent from my iPhone using Tapatalk

Balance on the outfit of the Micro Roni is right on the Glock’s grip.

Sent from my iPhone using Tapatalk

Retail is $399. When you register on the website www.yrsinc.com you get 10% off, so somehow it only cost me $329. This Glock 23 was my first CCW gun in 2008. I wanted to repurpose it since it wasn’t getting any range time.

I ran it through 200 rounds today. If I hold the forend down, it has cycling issues but if I just let it rise as it should, there are no problems. I tried controlled fire, rapid fire, controlled pairs and two handed/strong handed shooting.

I was using Winchester White box which gave me erratic shots. I had no consistency with the ammo at 50 yards so I went back to a 25 yard zero with the red dot. I will try some higher quality ammunition, next range visit. My intention was to have more range with it.

The sight is a Primary Arms Advanced Micro dot on an American Defense mount (which is a quick release).

I just have a standard factory trigger, at the moment.

So far, I have been pleasantly surprised.

Sent from my iPad using Tapatalk

https://m.youtube.com/watch?feature=youtu.be&v=i7jzgHJ4hdo

Sent from my iPad using Tapatalk

No problems shooting left handed, but my Mag release was on the left. I assume that can be reversed if necessary.

The bolt handle equivalent I noticed has to be cautiously pulled in a downward motion as you put it back. Otherwise I notice the friction with the frame which leads to cycling issues.

I was able to ring the gong at 25, 50 and 75 yards rather easily, after sighting it at 25 yards for a zero.

Just as an experiment, I was able to fire as I titled the gun to the side, as if shooting from behind a barrier (both ways), sideways (gangster style as a joke but it worked), and I even held it upside down, pulled the trigger with my pinky and hit the plate.

I even put this in a novice’s hands who doesn’t know how to shoot a pistol at 25 yards, and he was able to hit the gong two times in a row.

So the more I use this, I notice advantages of improved hits from longer distances much more consistently. Ability to shoot at different angles. Ability to shoot with either dominant or non-dominant hands. I tried out my buddy’s Glock MOS with an RMR and I was faster in mine even though I was shooting a 40 caliber weapon.

One caveat is how I’m supposed to clean this. I’ve put probably 500 rounds through it, right now. I don’t want to have to disassemble it but it looks like I may have to since there is a lot of powder inside the hull of the frame, and along the vents of the Roni.

Lastly, I want to reemphasize that the bolt handle must be pulled downward and back, since the handle can cause undue friction on the Micro Roni frame.

It’s very stable, and easy enough for a novice to use.

Sent from my iPad using Tapatalk

I picked up the Roni brace kit two days ago, which includes thumb stops, a flashlight, flip up sights and a sling. I mounted a Romeo 4H sight on it. It is a bit easier to conceal in the vehicle than the carbines I own.

I use the Roni with a Glock 22. Federal 180g HST printed a few groups that were 2" wide x 6" high at 50 meters from a supported position. Some groups ran 3" wide x 5" high. Winchester 165g JFP Target ammunition was a bit more accurate. Inside 25 meters is where it really shines. Precise shots were much faster than with shooting the Glock 22 without the Roni brace.

Deleted. Duplicate Post.

Try shooting out further. I have been able to hit targets out to 75 and 100 yards using 9 mm ammo.

Instagram: MuzzleblastMD

Deleted. Duplicate Post.

I’ve done some 100 yard shooting with handguns and was skeptical about the Roni until I purchased one. My ultimate goal is to establish a zero that will work from 5 yards to 100 yards. We’ll see how it groups with defensive ammunition at 100 yards with both the Glock 17 and Glock 22.

https://www.glocktalk.com/threads/at-which-distance-do-you-zero-your-9mm-10-yard-zero.1655097/

I asked this question before. At what zero for a 9mm would you use?

Based upon a ballistic app, iSnipe, a 10 yard zero gave a 2.7" drop at 100 yards, 1.5" at 25 and 1.1" at 50 yards. In real world though, the ammuntion I shot, using a Glock 19 MOS, with a 6 MOA dot was not adequate to determine a precise group. I was getting a 6-8" spread. An appropriate correlation with a 1.5" drop at a hundred was not possible for me. My conclusion for my red dot was to zero at 25 yards and be happy with it.

I don’t think I ever tried it with a Roni, using my Primary Arms 3 MOA red dot. I zeroed my Roni at 25 yards.

If you use a scope, I can see much better precision.

Zero at 25 yards, in theory gives a -0.6 inch drop at 50 yards, -3.5" at 75 and -8.9" at 100.

For whatever, you do, I did notice that any change of ammunition from one brand to another with the same grain weight or a change in Load from one grain weight to another changes the point of impact, when using a red dot.

It is with shooting these types of outfitted modifications that I noticed these type of changes with ammunition.

For those with fixed sights shooting at 7-10 yards, the discernible difference is minimal. However, it is much more noticeable at 20yards and beyond when I made that observation.

Instagram: MuzzleblastMD