AK FCG retainer plate advantages?

What is the main advantage of replacing the stock ak retainer spring say like with a Krebs retainer plate? I know it is suppose to make working on the fcg easier and cost is not really an issue, it’s only a few bucks. Since it doesn’t really put pressure on the trigger pin like the stock one, won’t it accelerate wear (“ovalize”) of the trigger pin hole on the receiver? Any thoughts.

btw, it is going on an SGL-21.

For me, it was the advantage of easily installing my G2 FCG on my 2002-vintage Century AK when I got rid of the crappy FCG it came with. Not having to deal with the wire was worth every penny. I’ve got a few thousand rounds through that AK now, and I haven’t seen any ovalling of the holes.

It adds $15 to the vendor’s pocket. Oh, did you mean an advantage to you?

I am not at all in favor of the plates, I just answered this same question on another forum a day or two ago. The plates are not at all in line with the original design. I have heard of minor fitment issues with some plate/receiver combinations. The plate is a modification of the original design, and my philosophy is to stick with the original design, or as close as possible, unless I have a good, clear reason to switch.

The original design uses the autosear spring to hold in the FCG, and the retaining wire mimics this. It’s a modification, but not as much a modification as getting rid of the wire entirely and using a plate. You can make your own retaining wire, just buy a pop-up sprinkler at Lowe’s for $1.50. The spring inside has enough wire for 3 or 4 retainers. Using a version of the Chinese “L-wire” style and a Tapco G2, I could get my FCG out at least as quick as somebody with a plate. I currently have an Arsenal FCG which needs a slightly different design, but like I said… I have enough wire for multiple retainers, and I can customize it exactly how I want.

In the end, though, getting a plate won’t hurt anything. I don’t believe it will cause any egging or anything of the holes, the FCG pins rotate half the time in the holes anyway, on auto, for thousands of rounds without any issue. The plate almost certainly won’t break (something that can’t be said of e-clips…) so if you have one, it’s probably as good as a wire retainer. Like I said, I just dislike it because it’s not at all like the original design. shrug

The main advantage of the plate is that it makes installing the FCG easier. You’re not going to hurt anything by using one. At $4.99, this one has served me well:

http://www.copesdistributing.net/product_info.php?cPath=32_34&products_id=366