Agency Arms NOC & Customer service fail

Let me begin by saying that I’m a long time lurker, and this website has been such a valuable tool that I’ve decided to contribute for a change. So I just recently retired and I thought I would get myself a treat. I’ve been wanting to get a glock for awhile and decided instead of getting one and then paying and waiting for the work I wanted to get done, I would just buy a custom one from the get go. I had my eye on the Agency Arms NOC and was intrigued by the innovation so I decided to buy it. I found the one I wanted here Agency Arms NOC Pistol 15 RD 9mm DLC Barrel - Omaha Outdoors Based on the pic I assumed it would have suppressor sights, so I could just throw one of my RMR’s on and it would be ready to roll. Unfortunately the pic was wrong, it had the same Heinie rear and fiber optic front sight that the gold barreled version had in the pics. Not only that but the rear sight overlaps the RMR cutout so you have to remove the rear sight to install the RMR, and they didn’t even provide the $8 RMR screws.


So I grab my Allen wrench and try to take out the set screw, not sure what kind of loctite they use but the damn thing wouldn’t come out to the point of almost breaking my Allen wrench.

Ok, no biggie. I’ll take it to the range and shoot it. To my surprise, it shoots a tight group several inches left at 7 yards. So I take a closer look at the front sight and see that it’s off center?

At this point I decide to contact Agency Arms customer service to see if they can put some new sights on and hook me up with some RMR screws. For a $3000 pistol you kind of expect to be taken care of? Well the following exchange takes place.


At this point I am pretty pissed off, I would have been willing to send it back on my own dime to get a different sight put on but I’ll be damned if I’m buying new sights for my $3K custom RMR cut pistol and paying a $100 gunsmith fee just so I can use my RMR. I contacted Omaha Outdoors and they were very helpful, unfortunately they wouldn’t let me return the gun but they did offer to contact their Agency Rep to try and get the problem fixed. The Omaha guy called back and said Agency would be willing to put new sights on if I bought them and paid for shipping and they would waive the gunsmith fee. I laughed, thanked the Omaha guy his help and said no thanks. The bottom line is Agency Arms has horrible customer service. If you decide to give them your hard earned money, don’t expect much in return. Haven’t decided yet what I’m going to do with this gun?

Pat M.

That’s interesting. I’m not a big fan of the whole “classified” bullshit where they state very little about the gun, I can see where that would lead to some confusion. That is kind of disappointing for a $3k Glock.

The front sight actually look off a bit to the left. If that being the case and it is shooting that far left at 7 yards, there is defiantly some not right there, no pun intended.

TXPO

Yeah, doesn’t make much sense but I haven’t had that problem with any of my other pistols? You would assume based on the pic it should be hitting to the right.

If the front sight is over to the left, wouldn’t the gun print to the right? I thought you move the rear to the direction you want impact to move and the front was the opposite direction?

https://www.rainierarms.com/agency-arms-noc-pistol-blk

Looks like you may have beef with the Omaha outfit. It would appear their marketing guys posted the wrong image.

Velocitas, Opprimere,
Violentia Operandi

I agree. Seems that your problem is with Omaha Outfitters and not with Agency.

I don’t have any issues with Omaha, they were very nice and helpful on the phone? My problem is with poor customer service, you would think that a company that caters to a small market and relies on social media/the internet/and word of mouth would be a little more helpful. I tried again to get the rear sight off and the tip of my wrench actually broke off in the screw. So now I have no choice but to take it to a local shop? Why would you say it’s a “zero commitment gun, if you want to shoot irons, shoot irons, if you want to put on an RMR, put it on” on social media when that’s not the case? The thing is I actually really like the gun outside of this sight issue. It has a great trigger, it shot very flat, and I really dig the “accelerator pad”, you can apply some good downward pressure with your support thumb for managing recoil.

How do you field strip?

The slide comes off like a normal Glock, then you have to remove the guide rod/recoil spring and unscrew the comp.

I never understood why all of the RMR ready gucci Glocks come with rear sights that overhang the pocket; to include the big three: Agency, Fowler and Salient…

10-8 just introduced the MOS rear that looks neat:

http://www.10-8performance.com/glock-mos-rear-sight-standard-height/

I don’t understand why an RMR ready glock would have a rear sight covering the mounting area. I also agree for a 3K glock they should be willing to swap your sights free of any gunsmith charge.

I think they are trying to say the picture on the Omaha website shows a suppressor sight however the NOC is not advertised anywhere with a suppressor sight, so the issue of you getting a gun you thought would have suppressor sights on it when it came with Heines is the fault of Omaha not Agency.

Yeah, it doesn’t make much sense? That sight looks like a better idea. I’m probably going to just use a file and hit the leading edge of this one until I can fit my RMR in. I don’t really feel that I need suppressor height sights, I’ve been shooting & carrying a RMR equipped M&P for the last 6 years and I’m pretty comfortable with it at this point.

That’s exactly what he was saying but as I said in my email to them, I’m not going to give them more money to put a different sight on at that point I would of been happy if they just gave me the RMR screws and I would have went on my merry way. His email replies just rubbed my the wrong way, that’s not how you keep customers.

I agree with you. For a pistol that initially cost 550 to sell for 3k should come with customer service/support out of this world.

I read the emails and I would be unhappy with that level of response.

I feel like when you ask for the RMR screws for a gun that is RMR ready they should have sent them no doubt.

Yeah so a buddy of mine just bought a Para-Ordnance 45. Got it home and saw that the front night sight wasn’t glowing. He called customer service and they shipped it back free of charge. The tech working on the gun actually called him and said that he had just replaced the front sight and asked if there was any other issues that he should take a look at? Now that is good customer service!

I don’t have a dog in the fight, but I also agree with these guys. The issue doesn’t appear to be with Agency Arms. The NOC simply doesn’t come with suppressor sights. It’s not Agency Arm’s fault if the Omaha Outdoors guys used a picture showing the suppressor sights. I do agree they should have used some different sights that don’t overlap the RMR cut out if the gun is supposed to be RMR ready, or at the very least, not make it impossible for the consumer to replace them easily.

No dog in this
fight, but agree that Omaha screwed up by posting the wrong image of the gun, so your expectations were set up failure. Also no gun comes with RMR screws. Not the MOS, not the Core, heck I don’t think the unity adapter comes with RMR screws. Granted none of those cost $3k and you’d think that @ $3k they would include a box of screws.

Also agree that their CS dropped the ball. They should have sent you a box of little screws and told you exactly what spec sights to get. Coughing up free services for someone else’s screw up I can understand them passing. However, if that was me I’d have done it cause I’m in a super high priced niche market and need all the positive help possible. AFAIK those things aren’t flying off the shelves.

Now on to your real problems. It’s a $3k dollar gun. Don’t let your anger allow you to screw it up with an effing file!!

The rear is probably loctited in place. Put some heat to it. The front is dove tailed. Drift the sight to center. If those steps are beyond your desires then drop $100 and get it fixed by a REAL smith. Don’t let your anger allow you to take some more shortcuts and screw an expensive gun up worse.

All great points! I’m not even angry anymore, and I’m definitely not going to ruin my expensive new gun. I’ll figure something out to get it working. If I can get it running flawlessly with an RMR I intend to use it as my carry gun.

I’m really not trying to be an ass…but if you are bothered by the lack of $8 screws, and are willing to take a file to it as opposed to taking it to a smith, maybe a $3k glock isn’t for you?

The gun is in the factory config…your problem resides with the retailer not the manufacturer.

I don’t see anywhere in the emails where they were rude or unreasonable.

JMO.

Sent from my iPhone using Tapatalk