Are there any decent .22LR bolt guns? Preferably something that fits in a Rem700 or Ruger 10/22 stock/chassis, but if those don’t exist then I’m open for anything really.
I won’t be using .22LR match ammo (I can’t find any). Just looking for a training gun at 50-100 yds that’s cheaper to shoot than center fire bolt guns.
Edit: I found the Remington 40x in .22lr. Apparently the CMP had them for a while but they’re long long gone. New production ones are extremely expensive.
Have you considered the Ruger 77-22? I had a friend who had on e that shot under 2 MOA with decent ammo (CCI Mini Mags I think). May shoot better. Biggest thing that I remember shooting it many years ago was that it felt much like a standard size bolt action rifle, at least much more so than my Marlin 22…
Seems like the biggest issue to accuracy is the barrel fit into the receiver. Again, it was several years ago since I last shot one, and now that I really don’t hunt, I’m more interested in the 10-22 breakdown…
But after this research, I’ll probably pick one up if I come across a decent used one.
Popular choices in current production 22 bolt guns that are affordable ($400 +/-100): ruger american, savage, browning t-bolt, and my choice the CZ455.
Moving up the $$$ tree ($1000-1800) gets you into sako, suhl, maybe a remington 40x and anschutz.
Wanna spend big $ ($2000-4000) gets you into the 2500x actions, gorham customs, stiller, turbo, and other benchrest customs that will damn near punch a single hole at 50yds all day long.
Going back to the affordables, the savage has a pretty good trigger but suffers from well known extractor problems and shitty stamped mags that the lips eventually open and dump ammo all over the place. Ruger 77-22’s I’ve seen at the matches just cant seem to be accurate, when they show they always place at the bottom of the score list. Have no experience with the t-bolt, never seen one at a match. CZ’s are pretty popular, mags that work and pretty reliable and accurate. They have an occasional failure that the bolt pulls out on the extraction stroke if trigger is set to light or improperly.
There are a lot of used bolt guns out of production that are very nice, even if parts support is an issue. Kimber (yea, kimber) made a very good bolt gun for the military as a trainer model82G and they were an absolute steal of a deal when the CMP had them for around $200 and H&R made a beauty as well. Unfortunately both are usually selling for $600+ now used when you can find them.
Rimfire central has the skinny on all the 22 stuff
My current setup for 22 steel matches: CZ455 tacticool, upgrades include threaded bolt knob, cheek rest, pillared and partially bedded, factory trigger adjusted to 2.1lbs
I will also second the CZ 455 Tacticool. Tigershilone made me a sweet custom bolt knob for it, too. It definitely improved how well I can run the bolt at speed.
Does anyone have experience with the new Ruger American rimfire? I like that it takes 10/22 mags and they offer a threaded barrel option from the factory.
So a while back I was researching this and ended up with the Tacticool as probably what I wanted but then I started to read about the custom work people get done and I honestly don;t even know what it means.
Like these terms…
upgrades include threaded bolt knob, cheek rest, pillared and partially bedded, factory trigger adjusted to 2.1lbs
So if I wanted to order a Tacticool and have some basic refinements done for a ‘get it right from the start’ rifle. What would be good to get done? How much does it cost? and who would you get to do it?
I’m happy with a CMP Rem 40x and a Lupy LR 6.5 - 20 updated by the factory with a fine tapered reticle and T1 turrets. I added an aluminum accesory channel to the forestock and reshaped/stipled (more verticle) the wrist. The trigger is accptable as is but the single feed is abit slow. Looked at at opening up the bottom of the receiver and fitting savage magwell parts for a detachable mag but the thought of fubaring it has kept it as is. The rifle consistantly shoots under .4 @ 50 and consistantly .85 - 1.25 at 100 depending on fodder.
Pillaring is putting in metal sleeves into the wood stock to keep the action screws from crushing the wood and thus torquing the action causing inconsistency and making the rifle holding technique sensitive
Bedding is using epoxy to form a tolerance fit of the action (sometimes action and barrel) to the wood stock inletting, again at an attempt to prevent action torque and aid consistency.
I would love to try out one of these, however PWS only makes them in limited quantities of 100 and often pre-sells them all. I only want the action, not a complete rifle and I cant find one.
I have been doing a lot of reading on Rimefire Central as well. I am probably going to get mine pillar bedded this winter, after the fall shooting season is over.
I bought the Savage that comes with
A5 ish stock which is awesome
Tactical bolt Knob
Threaded barrel for your can ( think positive )
Fluted barrel for cool effect ( how hot can it get )
Their acu trigger which is pretty nice for a .22
And I think it came with a base for the scope.
Crazy cheap , like $259. I was stunned at what this rifle came with for the dollar.