NEW! Rotation Limited Receiver CNC Steel QD End Plate by IWC!

[MOUNT-N-SLOT]

http://www.impactweaponscomponents.c...ns-components/


PRODUCT SPECIFICATIONS:

-AR Receiver End Plate with ROTATION LIMITED QD Sling Swivel Socket!

$18.95 - ONLY $3.95 Shipping! (when ordered separately)

-Rotation Limited to prevent QD Sling Swivel rotation & sling wrap-up.

-CNC Machined from a single piece of Billet Steel. NO ROUGH, Laser-cut Edges to snag your gear!

-Single-piece construction guarantees no parts to work loose or gaps to rust & corrode.

-Steel Construction allows for proper staking to MIL-Spec

-Black Manganeese Phosphate Coating to MIL-Spec to prevent rust, corrosion & wear.

-Proudly Made by Americans "Behind Enemy Lines in KOLORADO" at Impact Weapons Components, LLC.


THANKS!

MOUNT-N-SLOT

[polymorpheous]

Not sure why the anti-rotational limiters in the QD cup.
The receiver extension prevents rotation of the sling swivel.
Could cut costs by omitting this feature from the product.

Looks like a good product BTW.
Keep up the good work guys!

[MOUNT-N-SLOT]

Not sure why the anti-rotational limiters in the QD cup.
The receiver extension prevents rotation of the sling swivel.
Could cut costs by omitting this feature from the product.

Looks like a good product BTW.
Keep up the good work guys!

Thanks for the post and compliment!

There is a new QD Swivel in use with a small D-loop, which clears the buffer tube and allows the sling to wrap up. We wanted to get ahead of the other QD End Plate makers by adding the RL feature to add value for these customers. It's actually the same cost to make; just a programming change from running the tool in a full radius.

MOUNT-N-SLOT

[DreadPirateMoyer]

Is this the same thickness at the receiver extension as mil-spec end plates? The only QD endplate I use these days is Noveske's, because others are too thick and sometimes don't allow a stock to fully collapse to the last notch.

If so, this is a very welcome addition to the market since the Noveskes are not always in stock and can be hard to find. The more the merrier.

[MOUNT-N-SLOT]

Is this the same thickness at the receiver extension as mil-spec end plates? The only QD endplate I use these days is Noveske's, because others are too thick and sometimes don't allow a stock to fully collapse to the last notch.

If so, this is a very welcome addition to the market since the Noveskes are not always in stock and can be hard to find. The more the merrier.

Thanks!

Yes, they are. In fact, the surface of the socket protrudes from the rear receiver .010" less than Noveske's for just that much more added clearance to prevent accidental button depression when the stock is in the closed position.

[DreadPirateMoyer]

Thanks!

Yes, they are. In fact, the surface of the socket protrudes from the rear receiver .010" less than Noveske's for just that much more added clearance to prevent accidental button depression when the stock is in the closed position.

Great! Purchasing one now.

[snakedoctor]

Do you offer the small D-Loop swivel as well?

[Pork Chop]

I'll be buying this. I've yet to find any of your products that haven't exceeded every expectation.

Thank you for posting this. I always look forward to your new products.