I haven’t been able to find mine, and I somehow doubt it will ever actually be produced since it combines features that I believe three different makers have patents on. My list:
Benchmade axis lock
Emerson wave
Spyderco hole
3.5"+/- blade
black-t type coating
available both half and non-serrated
pocket clip that can be attached at either end on either side
$100-$150 (although if 1-7 were met I’d probably be willing to pay more)
Unfortunately, nobody makes it.
Benchmade used to make the 806 which had 1, 3, 5, 6, and 7 but they discontinued the damn thing. Basically the blade was a little long at it didn’t have the wave.
They also used to make the 550 which I thankfully managed to get one of and it has all but 2 and 7 (and I never got a half serrated partner for the plain edge I have). Blade is the right length but no wave and no ability to flip the clip for tip-down carry.
Spyderco makes the Endura Wave but the lock is too old-school for me, the handle material is a bit chintzy and the blade is a bit too long, doesn’t come with a coating option, and doesn’t come half-serrated.
They also offer the Delica Wave but it has the same shortcomings as the Endura only in this case the blade is too short.
Emerson makes the CQC-10 which is also very close but lacks the Axis lock and clip attachment options. I’ve also heard that they use a steel that’s not as hard as one would want for a general purpose knife.
I managed to find a Benchmade 550, and even though the handle is an obnoxious OD, I can’t find a half-serrated twin, the handle is all plastic, and it doesn’t have the Wave, it’s the best set of compromises I have come up with.
Anyone managed to find that daily carry folding knife that is the perfect combination of features for you?
Emerson uses 154CM which is a very good steel. It sharpens easier than S30V and is better than most others in terms of edge holding. I’m an Emerson fan, Strider after that. I’ve found my perfect folder, an Emerson Commander customized with a full titanium framelocked handle. I’ll have to get a pic up. I have a model 10, I like it but it doesn’t really see any use, as I’ve taken a liking to framelocks.
You don’t ask for much, do you? That’d be a heckuva knife.
Anyone managed to find that daily carry folding knife that is the perfect combination of features for you?
I like my Spydercos. Delicas, Enduras, Rescues, Natives. They perform my required tasks well, at a price point that isn’t too injurious if they’re lost or have to be abandoned.
I hace an Emerson CQC-7 w/ wave and half serrations and a Strider DB. I like the idea of the Tanto style blade if I have to punch through something.
I carry the CQC-7 everyday in my pocket and keep the DB near my AR kit.
I think it is impossible to find one “perfect” piece of equipment. Everything is a compromise.
I carry a Benchmade 520 every day (Plain edge, 154CM) and it’s incredible. Axis lock, stout blade, sharpens easily, and the cutting geometry is stellar.
The CQC-10 is pretty close, and I could deal with the liner lock, but a knife for me is really and truly a work tool first and a weapon second. With my limited skills, a work knife can be pressed into a defensive role very easily (i.e. anyone can be stabbed or slashed with a Leatherman wave if need be), while the opposite isn’t really true (try doing something practical with a Karambit ).
I guess this is why I’ve settled on the Benchmade 550 as my work carry knife. If it had the wave feature it would be pretty much good to go. Since they don’t make it anymore, I’m considering changing to one of the Spyderco Wave models since they would be easier to replace if they get broken or lost.
Rob, you might want to contact Steve Rice over on the Bladeforums website. He has his own subforum, and does excellent work on knives. He is authorized by Ernie Emerson to install a Wave on a knife, and is also authorized by Sal Glesser to put a Spyderhole onto a blade.
He could take your BM, shorten the blade, and install a Wave on it.
One mod he does that is very nice is to remove one side of the knife, along with the linerlock, and convert it into a titanium framelock. I have a Spyderco carbon-fiber Military with the BG-42 blade, and he’s going to do that mod for me.
I agree with your choice on the 806. I have an 806SD2, and it’s one of my favorites.
Same here. I like the 551’s, as they are cheap enough that ‘temporarily misplacing’ them isn’t to hard on the pocket, and they are durable enough to last a while.
I’m with you on that. I tend to snag my knife on seat belts, door frames, nylon straps from time to time and bend the hell out of the clip, making it unusable. Polymer will either be unaffected or snap, but it’s better than having a slight bend.
I’ve got a couple knives I need to send back to Benchmade.
I sold Spyderco knives back when they came with the plastic clip. It was crap. We constantly had returns for the damn thing breaking off. I think they finally switched to metal, even though it probably cost them more up front, because they were constantly replacing them.
If you have a problem scratching things on the metal clip, either watch where you’re going , lose weight , or dip the clip in this.
I like plastic clips for the same reason I like PMAGs - if it doesn’t have a catastrophic failure, it’s probably unscathed. It’s like feedlips on a mag; I can drop a USGI mag and bend them out of shape, or drop a PMAG and have them be perfect or snapped off - no middle ground. If I can get a polymer that has equal or better strength than the aluminum or steel they use, I’ll take plastic any day.
Maybe I can convince Richard to get into the knife market.
That’d be a heckuva knife.
, or dip the clip in