Aimpoint Micro H-1
- Battery Life / Quality
- Compact Size
- Went w/ the H-1 over the T-1 because I don’t/won’t have NV
Aimpoint Micro H-1
I have one Aimpoint C3 (with a LaRue PoBoy in front of it)
Why? Well, as Rob says: “No need for deep diving or NV, and on a budget?”
I’m currently biding my time and budget to save for an H1.
I love the H-1 goodness. I have it set up on a ADM mount on my 6920. A Viking warhammer might knock it off there. Might. But doubtful.
I have a C3 (with the Poor Boy on the way) for my TacSol dedicated .22 carbine. As others did, I went with Rob and Grant’s recommendations. I am sure it will work very well.
I’m liking the ADM mount. It was easy to put together with the 1/3 cowitness spacer. If I decide to switch to absolute cowitness, it’s a $20 swap, not a $100 mistake. I’m going to try both, and see which I like better.
I’m definitely going to snag another H-1, and then a TR24G from Grant when he gets those in. That will get the carbines covered for RDS goodness, and then I can start working on the rifles.
Buy Aimpoint, and be done with it. Quality lingers, long after the illusion of a false bargain vanishes. ![]()
(Note to LtCol Blish - feel free to use that as a marketing slogan. Just send me a hat in return. :D)
I had an Comp ML2 which I was happy with and then purchased a new carbine WITH an Eotech 5.11 on it.
When that failed for the famous battery box problems, I bought an H1 to replace it. I think the micro is a little slower getting on targets and force you to maintain a tighter cheek weld than the larger optics but the weight and reliability make this a fair trade off. At least until the next best thing comes out.
I ended up with my Comp M3 then M2s. They were a steal. New purchases are T1, for size/weight efficiency. All are in LT mounts.
+1
-RD62
comp m4 basically bullet proof and it takes a AA battery.
This for me ^^^, I appreciate extreme ruggedness and AA usage like the rest of my kit. For the wife’s PS90 where weight reduction is important I have an Aimpoint H-1.
Tomac
We started with early EoThingies around 2000. Then I began reading Pat Rogers’ writings regarding Aimpoints. Bought Comp M’s with GG&G mounts. Sold them to upgrade to Comp M XD’s and ARMS mounts. Took them to Pat’s class and learned about LaRue mounts. Upgraded to M2/ML2’s and LT mounts. Within the past year, I sold off all the ML2’s we had and upgraded to 2-MOA C3/ML3/M3’s on LT 129’s and T-1/H-1’s on LT 660’s.
Used TOS EE to sell older models high and buy newer models cheap (here, too.) Timing and cash in hand to deal are everything. Never paid more than $25 to move up. We have never had an issue with a used Aimpoint.
I chose an ML2 way back when it was pretty much the best out there w/o NV capability. Now, with my latest buy, I bought an M4S, because of the insane battery life and rock solid durability. It sits in a LaRue mount, and always returns to zero, no matter how many times I dismount it.
I could have gotten a T1, but I like the 30mm window on the M4S better. I felt it was easier to find the dot, especially when shooting without a good cheek weld. Also, I felt the 2 MOA dot allowed me to shoot much better than the 4 MOA dot on the T1. The T1 seems to work great for most people, but I’m putting the $$$$ on my optic, so I chose the best for me. YMMV. It’s prolly a good idea to try both though. ![]()
There are two C3’s and two H-1’s at my house. The buys were based on the chart by Rob_S and other info from here and wwwtheakforum.net .
On the AR carbines , all mounts are LT and there’s a Po’Boy available for each carbine.
Could I run a 3x Mag behind a C3? I assume so but I’ve never seen it done.
Thanks,
Camp
You can run a 3X behind ANY Aimpoint.
C4
you have now
(or at least a 2.5x magnifier)

I have a M4s and a T-1, but prefer the latter because it does everything all of the other models do in a smaller and lighter package.
I have an ML3 and T-1. At first the T-1 took some getting used to. It seemed like it took longer to get a sight picture for some reason. (smaller tube?) But now it’s just as quick as the ML3 for me. A little lighter in weight and the dot isn’t too big compared to the 2moa dot on the ML3. Can’t go wrong with either but now that I have tried both I’d stick with the T-1.
Went M4 due to 2moa dot, battery life,and AA battery, and integral mount!
I finally decided to go H1 - I’ll never need NV and the minimal price difference over the C3 was worth it to me.
M4S. I got a good deal on it for $625.00 a few months ago.![]()