I’m sitting my manual case trimmer aside for a moment to do several thousand rounds of 5.56. I like my Hornady case trimmer but I need a a motorized version for something like this.
So what are you using, what’s the best and most reliable and accurate?
I absolutely hate doing any part of case prep manually so I ended up buying a Hornady Lock n Load Case Prep Station for high volume case prep.
I was also looking at getting a Giraud trimmer because I heard a lot of positive reviews but I really wanted an “all-in-one” unit so I bought the Hornady instead.
For 5.56 I use Worlds Finest Trimmer https://littlecrowgunworks.com/product/worlds-finest-trimmer-wft/?v=7516fd43adaa
I use a motorized version of the RCBS for everything else.
This was taken before I figured out to use it vertically. There is literally no better trimmer on the market.
[video=youtube_share;FM1P3EZJ_-8]https://youtu.be/FM1P3EZJ_-8[/video]
I couldn’t afford the Giraud so I went with the Gracey Power Trimmer www.matchprep.com
The Giraud is looking very good at this point.
Worth it. I wish I’d have set mine up (in the beginning) to cut .005" longer than spec. Cutting mil brass back to spec takes too long. And the extra case length is not problematic, and helps increase surface contact with the bullets… which theoretically increases neck tension consistency… and accuracy.
If you are loading precision rifle, most any hand or power attachment trimmer will work. If you are doing anything high volume, or want ease of use the Giraud trimmer is one of the best purchases you will ever make.
You can buy a hand/power trimmer, but then you will want the rcbs cleaning station also to chamfer with. While it does have its merits, you will find that the giraud trims/chamfers at the same time to be much more valuable. If you have the funds, Giraud is the top trimmer made. Reloading without it…kind of sucks. You will only go over your buddy’s house to help him reload once without it…then you will be dragging it along with you.
Reloading several thousand at a time makes the choice for you. When you call, his wife will answer the phone. She is always very nice and helpful. Order 3 extra cutter blades, its cheaper in the long run. They last a very long time also.
Forgive me for not answering your question as asked, but I do have a suggestion. Some brass places will process brass for you for a small fee. Being old and lazy, that would suit me. If you are interested in this approach, pm me for a couple places.
Little Crow Case Trimmer. Saves a hell of a lot of time and does a very consistent job.
ag,
Another Giraud fan here. After doing my first 2000 cases manually I decided there has to be a better way. I finally picked the Giraud and the next 6000 cases were easy. By hand I could do a hundred cases an hour not including neck inside and outside reaming. With the Giraud I can do a hundred cases in under ten minutes and at the same time it reams and chamfers the neck. It takes about 1-2 seconds per case.
The Giraud is expensive but is one of my most valuable reloading decisions.
best wishes- oldandslow
That’s my experience. I use one for 223 and another for 308. I have a manual RCBS but it’s torture to use imo.
I use these cheap lee’s this link is to half the required parts needed to make them work the other half is only about $6 also. I prefer them because the case spins making cleaning cases with 0000 steel wool easy at the range for load development.
http://www.brownells.com/reloading/case-preparation/case-trimming/trimmer-case-holders/lee-length-gauge-shellholder-357-mag-sku100010032-54160-103368.aspx?cm_mmc=cse-_-Itwine-_-shopzilla-_-Case%20Length%20Gauges&gdffi=08de76408978434b83b40ee6631fc110&gdfms=D9CD4E76E1034869BC0B4C7C31D204D5
The OP has a manual case trimmer. He’s looking for something powered as he has “several thousand” cases to trim.
I also own the trimmer you linked to. So unless you’re only trimming a handful of cases, it absolutely sucks for anything of any sizable quantity.
The correct answer to the OP question is the Giraud.
I use an LE Wilson case trimmer.
It takes a long time, but each case is always, without fail, exactly the same length to the thousandth.
I would like a Giraud, but I am poor.
Giraud Tri Way for the win. It’s basically the Giraud cutter head, and you supply your own motor (drill press, hand drill, etc.). Under $100 for a Giraud trim.
The only other similar unit that also deburrs and chamfers is the Trim-it II, which is more expensive and has some meh reviews. It’s cheaper if you need to trim multiple calibers. But it’s no Giraud…
I use the WFT and I think it is only bested by the giraud. I would by the tri way and use my drill press just as I do with the WFT.
Sent from my iPhone using Tapatalk
That’s because the LE Wilson indexes off the case head. You’re a glutton for punishment. I have the LE Wilson for .308 and 300 WM, and I almost never trim that stuff anymore. Too painful.
I would like a Giraud, but I am poor.
The Giraud is a classic buy once, cry once purchase. It’s trim consistency is very good, but it indexes off the shoulder, and thus is only as good as the reloader’s sizing/brass spring back variances. Annealing would make the Giraud almost as good as the LE Wilson, but for 5.56, it’s not worth it for me.
http://ads.midwayusa.com/product/476992/lee-case-trimmer-cutter-and-lock-stud
These are the other parts required to make the cheap lee trimmer a power trimmer that I use with a cordless drill. I trim and chamfer many thousands of cases a year with it. Many of the other manufactures products are great for doing large volumes of cases also. I like this Lee trimmer because the brass is spinning not cutter this makes cleaning a few cases ocationally very easy also.