Just picked up a factory assembled LMT Defender lower. Any idea what buffer they use? I see no markings on it as in the “H” marking.
Thanks
Should be a carbine buffer.
Usually no markings indicates a carbine buffer.
Most companies put a standard carbine buffer and the lighter (Rifle) extractor spring ( Blue bumper) in their carbines as they don’t know what the end user is going to feed the gun. Hot or weak ammo.
The usual upgrade I do is to replace the extractor spring with a Bravo company heavy spring and black bumper. Then a “H” Buffer. and I try to buy a the heavier full auto bolt carrier when I buy or build the upper.
I usually run fairly hot Federal M193 ammo and the guns still have light recoil, fully reliable and are very controlable.
LMT uses carbine buffers on their DI and H2 on their piston rifles. I have both platforms.
Also, most good companies such as DD and LMT include the black insert for the extractor. LMT puts a standard CAR buffer in their DI guns, including their factory SBR’s. However they recommend running an H buffer in the 10.5" guns if shooting mostly 5.56mm ammo.
(FYI, DD uses H buffers in all their rifle builds)
I could swear I’ve read that LMT’s carbine buffers are “H” weight, even though they’re not marked.
But if no one else can corroborate that, it’s safe to assume that they are standard weight.