Hey all, first post in a long while, Deployed right now but wanting to order or find a bolt .308 for when I get home,shot the knights armament m110 but I dont want or have the need for a semi auto. Dont know much about bolt rifles but I would like one, I want a setup like the M24 and I know thats based off the remington 700 but I dont even know where to begin because there are so many variants.
Id like to keep the price of the rifle around 1000 dollars and spend about another 600-1000 on the glass.
I just did this myself. I was very new to the bolt action world and I love the rifle I just put together. It’s is the Remington 700 SPS AAC-SD. It set me back about $750 for the rifle, the specs are ok, the stock and trigger leave something to be desired but the stock can be fixed with a dremel tool and the trigger… Well,I like mine ok, but a aftermarket one can be had for $100 or so.
I went with the vortex HS LR 6-24X50 FFP model. About $1000 for that and then another couple hundred for rings and a base and I have had great success. Holding about 1moa or better at 100 and I’m a novice with the bolt fun and .308 round. I think the above rifles are great too(no experience of course) but you will be hard pressed to beat a SPS Remington 700 for your budget. Just my opinion. Hope this helps
Buying a pss will get you a much better stock than the plastic that comes on the the other models. Them and the 5r have hs precision stocks on them that don’t need upgrading. Used will save you enough for base and rings.
Which works fine if you like that style stock. But don’t buy the more expensive 700P and then change stocks. Do what JR said and get the 700 SPS AAC-SD, which can be found for less that $750, and put the style of stock you want on it.
I agree with the last post. Buy the SPS so you have money leftover to get a new stock/chassis system if you so desire. I picked up my SPS on trade last year, put it in a McRees precision chassis and it holds .5-.75 MOA with factory match ammo.
I’m in the same s(h)ituation. My exception is that at one time I had a GAP custom rifle. Had to sell it (Kids, house, etc). Now I’m ready to get back “in” but not on a bachelor’s budget. Except now I have champagne tastes on a Natural Light budget. Here’s what I’ve been thinking…
First, if you’re going with a factory rifle you need to consider the costs of upgrading.
If I were to get a AAC-SD, I’d have to replace the stock and trigger, mount/rings, etc. That could end up being another $400-$500, not including the optic. That’s assuming the Rem QC is up to par and you get a good barrel etc. When you consider the cost of what it takes to get it where it “should be”, it’s not such a bargain…around $1200 or more (less if you go with a B&C stock or Magpul)
If I get a 20" 5R, it would cost considerably more, but the stock is good as-is and the barrel, although still a Rem barrel should be a little better. Still could use a replacement trigger though…$1200-$1300-ish.
I’m also considering a Tikka CTR. Great barrel, action slick as snot, comes with base, enlarged bolt knob, and great trigger. Only thing is, although the stock will do, it could use replacing. I figure sell the stock and bottom metal (same as TRG 22) for $400 and add another $200 and get a KGR X-Ray. Total around $1200.
Final consideration for me is a FNH SPR A1A. Yeah, it’s $1600-$1700, BUT it’s pretty danged complete as-is. Other than a scope/rings and ammo, I can’t think of anything it needs. FANTASTIC barrel, great action, McMillan stock (which I like), great trigger, mount included (not to mention tapped 8-40), detachable box mags.
Oh believe me., I see the virtues of the fn guns. Op said he wanted a Remington so I made my suggestion based on that. I would personally take the fn before a current Remington.
I was looking a Rem 700 SPS AAC-SD, and I bought the Savage instead.
With a Nikon Monarch 4-16x50 my whole rig cost less than $1,000, total, and it shoots less than 1moa out to 300yds with factory ammo (hand loads to follow).
I was in a similar position and got an AAC-SD and put a Vortex scope on it and I am very happy. I do plan on changing the stock to the new Magpul and eventually the trigger as well but when I took it out to shoot for the first time it was consistently shooting sub moa and I am far from a skilled marksman. Of course I have heard of issues with the accuracy of some Remington products so I would shoot it before and modifications to make sure the base level of accuracy is up to par.
I just finished up a Remington 700 SPS Varmint build with a MDT LSS chassis system, Vortex Viper HS LR 6-24X50 FFP, and I’m into it roughly 1,750. I choose the chassis because it has the ergonomics of a AR, the SPS Varmint because for the price it’s hard to beat and the viper because I got a steal on it. So far, really fun and light weight. Don’t regret anything.
Remington is fixing to do a massive recall,you might want to check into this before
you buy one. I also would like to get a new precision rifle in .308 to play with and the Remington is hard to beat. Iam still doing the research but the savage is a pretty good buy right now.
Pretty much all model 600,700 old and even new to fix guns that are firing on there own. My wife’s family has a 70s or 80s year model 700 thats fired with no one around it twice and once when the safety was clicked off. Been problem since the 1950s I think. My model 600 has never done it but there was a recall on it many many years ago.
Even their new trigger( their fix to the problem) is effected I think? There’s a massive class action being settled right now. As soon As thats settled the recall will start. Some say this is a myth about them fireing on their own but I’ve seen it and it happened in front of a judge in a court room. So know there’s proof , hence the class action suit.
There is a notice on page 91 of the July 2015 issue of the American Rifleman magazine you get with your nra membership. But I’ve talked to Remington also.
