I went down this road before. Here’s my story.
First off, new SI M1As are not as high quality as old GI parts rifles. That being the case, I picked up two rifles with TRW parts and Fulton receivers. Great start. To make a long story short, I tried 2 McMillan stocks, professionally bedded by a bad ass M14 smith, and a Troy MCS system, but I could not get them to shoot better than an inch-well, more than that really. I consider 1 moa or better as a minimum on my DMR guns, hence that was the standard.
I was going to buy a Sage stock to build on, but the wait was stupidly long, and stories abounded of Sage taking peoples’ money and taking forever to deliver. During that time, I took a course at a school that has a good number of students through it, and the owner of the school recounted that he had several brand new accurized factory SI M1As come through there with an active duty Army unit. NONE of the guns would make the 1MOA requirements. From what he’d seen, the only M14s that would run were “real deal” Crane rifles, fielded by Air Force PJs. They used high quality parts, assembled by great 'smiths, and were built on the Sage stock. But those were the ONLY M14s that have made it through the course, which involves stalking and engaging known and unknown targets out to 1200 yards.
While I was there, an SF group was breaking in some SR25s, and they were making the grade just fine. Only thing is, Knights didn’t mount the scope rings on an elevated base, so they didn’t have the elevation to get past 800 yards, so they had to shim in about 20 moa and then they were good to 1000. Anywho, the SRs shot pretty well, but not as well as a humble (cheap) bolt gun-I guess you just have to accept that, generally speaking.
So, at this point, I threw up my hands and sold off my various custom stocks and put my M1As in standard fiberglass GI stocks. One is plane jane and the other is decked out, end to end, in Smith Ent gear, and looks bad ass. The guns are so much more fun to shoot in their natural state, I won’t mess with them again.
SO, in the end, I went with a rifle that a guy from Snipers Hide had built by Noveske. It is a Noveske 18inch N6 upper, over a DPMS lower with Magpull PRS and a smooth breaking 2 stage trigger. First time out, it grouped .91inch with BH 175 grain OTM. That was with a shitty initial setup and a half ass rest. I hope to shoot it again soon and see what I can do with some Federal 168.
Now, you are thinking-you still have a gun that shot no better than 1 inch? Yes, but I got this rifle with a pile of mags, bipod, etc, for 2grand-not including scope, of course. I was going to spend WAY more than that with the cost of parts and labor from Smith Enterprises.
The point is, it seems that you have to spend alot of money and have access to a talented M14 'smith (not many around) in order to get a very accurate M1A. BTW, opinions on how to accurize the M1As abound as well: modular chassis stock systems, bedded stocks, unbedded stocks, unitized or un-unitized gas systems, welded versus screwed systems, the list goes on and on. You have to be aware of all these things and instruct your smith as to what you want, or just go with whatever they think you should do. I guess it depends on how much you trust your builder.
Oh, I’ve spoken to several folks who swear that SR 25s on the civilian market don’t get the quality of components that the military gets. (The military paid 10grand each for the case full of rifle and goodies I was looking at!) That being the case, I went with the Noveske, which I feel is the highest quality production company out there.
I love Noveskes, but I have heard lots of good things about semi auto 308 rifles built by GA precision, as well.
Sorry for being verbose, but there it is. Good luck with whatever you end up with. You can probably find a bad ass M1A set up just like you want, on M14 Firing Line Forums. There’s a great PX, as well as a wealth of M14 knowledge over there.
Regards.