So, I’m on the edge on the 6.8 and thinking on a couple different things.
I think I’ve narrowed it down to either a standard 16" middy with fsb, TA11, Troy rear. Or a 16" middy, Troy Extreme(only want to mount a sling attachment point(end of left side and the Troy front at some point, maybe a light at 1100 or 6) with either the TA11 or a 1-4/5/6.
If the TA11 or if a go with a variable, are you guys using a .223 or .308 reticle for drop?
It’s main use will be for hunting, mainly deer. I’m looking at the SSA Barnes loads, 110 or the 85 TSX?
I like the AR15 performance line and should be going with them.
I think a 16" middy with Troy Extreme rail is a great choice. I run on in competition and love it, its narrow, has the “add a rail” feature and is SIMPLE to take on and off if your gas block is smaller than the dia of the tube. I saw Jeff Cramblit do it this weekend at the AA Ozark 3 Gun.
Do some reading on 68forums.com the 90 grain TNTs are not recomended by SSA for the XT barrels by ARP. Everything else like the 85 grains are good to go.
Personally, I suggest you check out Noveske’s 16" 6.8s
I think you pretty much have this one bagged although IMHO, I would lean more towards the variable 1-4/5/6x as far as optics are concerned. I run an elite 4200 1.25-4x24 and its pretty quick up close but also lets me stretch it out long distances… I am actually now considering the elite 6500 1.25-8x32 since its pretty much the same but affords 8x magnification which would be great for 500+ yds(DocGKR has informed us of 600+yd shots with the 6.8)… I also like the detail you can capture for the closer shots…
I would more than likely only do the ACOG with the Fixed fsb because for me the fsb is in the way otherwise with a 1x
I’m spoiled right now with a NF 1-4 on an AR I have. The only change I’m going to do there is a 1.93 Larue vs. the 1.5 After shooting it one day, I realized that having tad higher would make it quicker for me.
At first, it’ll sport an M3 in a Larue until I get the funds for the optic.
Cold, The Noveski SS? I was thinking MRP also, then don’t see the point.
Cold, I don’t see the pic. Is Troy coming out with a sling point to where you don’t need the rail? I thought I heard that somewhere here before, not sure.
With BDC’s which one is the closest match for the 6.8, .223 or .308?
I have seen that people use both .223 and .308 bdcs’ but I see more referencing the .308…The .308 is more on par with the 6.8 ballistics within a certain range so if I am not mistaken the .308 bdc would be the choice for the acog…
Also, there is a 6.8bdc acog = TA31H-68: 4x32 Trijicon ACOG — Dual Illuminated Red Horseshoe(The ranging reticle is calibrated for 6.8 SPC flattop rifles out to 800 meters)
There is a thread running at 68forums about buyers up in arms with Troy for not including a sling hole, and some recommendations on how to WECSOG.
I tracked down the TNT issue, and there have been a few problems, so for those who encountered them, that lot is not recommended for further use. I could not find disclosure as to which lots this effects. I’m sticking with the ProHunters until this is resolved.
BL, once you get up into the Bushnell 6500, isn’t that crowding Leupold/Docter price range? 1.5-8x sounds pretty versatile, tho…
If I am meticulous about shopping around I can get one around 500.00 or so…
From what I have found, no one has offered such a versatile 1x scope…
The leupold MK4/MRT is around 900.00 and it is less versatile as far as specs go.
I think the .25 extra magnification however slight may make a difference in up close fast focus. It also has 3x less magnification and almost 2" less eye relief…It also has a larger 32mm objective lens which I see as an added benefit since I currently have a smaller 24mm lens diameter… they are the same weight…
I love how bushnell now offers more versatility in a solid optic… 1.25-8x / 2.5-16x / 4.5-30x
Good stuff dude. I see you use CWPSA stuff. I just switched to Ready Tac holsters from Chris Patty both dropped offset for my M&P Pro and my STI limited gun. I also put my SJC Titan comp back on my Tactical division rifle and will use the KAC Triple Tap on my 16" midlength BCM Gunfighter for Limited division 3gun (new sponsors of mine).
I’m already running the Type 4 BCM/Gunfighter CH handles on my 3gun Tactical division rifle, and my Colt 16"/PWS piston gun. I like the CH a lot. It’s kinda hard to explain but it seems to move better when using only your support hand to run it. It seem to move more linearly (back in a straight line) if that makes any sense. On both guns I have the Phase 5 Tactical faux BAD levers.
I have had a few 6.8s and like the 16" upper with the Troy extreme forearm
purchased from AR15Performance
mine is used for hunting, it’s my go to gun for hogs and gets used for deer when stalk hunting
I have had Eotechs and Aimpoints with an without the 3x magnifier, ACOG TA33, several 1-4 variables
I run a Trijcon TR24 with the german #4 and the green dot
I think it’s the perfect scope
I don’t feel the need for BC reticles having had them on a few guns
