The Tripod Thread

I thought this might be a useful resource as tripods and associated gear become more popular for precision rifle shooting.

Though my rifle is an entry-level rig, I’ve been into photography for a long time and have found my main camera tripod/head combo to be quite good as a rifle support.

The tripod is a Manfrotto 055, which seems to be a popular choice for this application. However, the Uniqball UBH 45 ballhead I am using is just becoming popular in photography circles but I have yet to see any links to it being used for rifle support. With the recent purchase of a Magpul Hunter 700 (and the nice flat area on the bottom of the forearm to mount a QR plate), I thought I would give it a try as a shooting platform.

What is “unique” about this ballhead - and quite useful for PRS - is that the main (outer) ball is used to level the inner ball; the movement of the inner ball is limited to panning and “elevation” adjustment only. Unlike all other ballheads, this keeps the optics and the bore level (and prevents the rifle from flopping over when the inner ball is loosened). Once the outer ball is locked in a level position (quick and easy to do), the rifle remains plumb (optic to bore line) regardless of any panning or elevation movement. So, the rifle can track both horizontally and vertically all while keeping the optics centered over the bore. :slight_smile:

The UBH 45 ballhead is rated for 88 pounds yet weighs only 24 ounces. [b]Link to B&H Photo[/b]

Photos

The outer leveling (red) ball is locked down with the lever on the right. There is no “in between” friction on the outer ball, it’s either locked or loose - you simply loosen the lever to level it then lock it down. The inner ball is controlled with the red knob on the top left. This knob can be set to place some drag on the inner ball, from lose to very tight (or locked down completely). Having used many ballheads over the years, the adjustment for drag on the inner ball is very good and can be set to provide smooth movement.

A closer view with my rifle mounted.

A universal QR plate (Arca Swiss style supplied with ballhead) secured to the bottom of the Magpul Hunter 700 stock.

The plate is held to the bottom half of the forearm with two screws that pass up through the bottom of the stock and through two steel plates inside the stock made from 1/2" wide by 1/8" thick flat stock, then secured with nuts and Locktite. The stock is actually quite beefy in this area with plenty of internal webbing. Additionally, this is where the forearm mounts to the stock’s “chassis” (the three most rearward screws in the barrel channel) making this an ideal spot to mount the plate. Removing the two screws from each side of the stock by the magazine well and then the screws from the barrel channel area allows easy removal of the lower forearm section to mount the QR plate.

With rifle mounted, it is held very securely and can be moved smoothly target-to-target through the vertical and horizontal axis, all while keeping the optics level (and maintaining control of the rifle). I’ll also be using a sling to further steady the rifle and plan to live-fire test this setup in the next few weeks.

I like the looks of this, seems like a good entry level setup for tripod shooting.

Is there an advantage over the Manfrotto pistol grip head?

IMO, absolutely yes!

The huge advantage I am finding is that the Uniqball works like a gimbal - it only moves on the horizontal and vertical axis. With a standard ballhead or pistol grip, when tension is loosened the ball can move in any direction making the rifle more difficult to control, and care must be taken to hold the rifle in such a way so it doesn’t flop over on its side. Additionally, the UBH 45 is rated for 88 pounds vs. 11 pounds for the Manfrotto 322RC2, which makes tension control of the ball on the UBH much easier to adjust for smooth movement.

Notice in this videohow the top bracket arm that the lens/camera is attached to stays perfectly level (horizontal) regardless of how the camera is moved. Now imagine a rifle mounted on the ballhead and how the windage turret on the scope would always remain level. I will shoot a short video like this one only with my rifle attached to illustrate.

BTW, I’m hoping others will post their tripod setups!

Using a Mountain Shooter sling for additional stability;

I have a RRS (I’m a photographer). Haven’t used it yet for shooting. But I guess I could. I just don’t have the need. Bipod seems to work just fine and I don’t hunt.

They now have a line of products dedicated to precision rifle shooting - http://www.reallyrightstuff.com/Sport-Optic-and-Rifle

Thanks for the video link, understood now. I can see how that would work well, the $ is the hurdle. Might just save up and eventually get one to run.

The $ is definitely up there on a good tripod system, but it’s worth it if you don’t shoot on a normal square range. In the real going prone is few and far between. Especially in the summer when the grass is high. This time of year I spend 90% of my time on one unless I’m just on the bench getting zero at 100yds.

Sent from my iPhone using Tapatalk

Would this one work too?

https://www.amazon.com/UniqBall-Ballhead-Leveling-Pan-Tilt-Capacity/dp/B00JO0HDF2/ref=pd_rhf_gw_p_img_4?ie=UTF8&psc=1&refRID=32MF1BX2XD4GSA3BBM3G

Less weight capacity but still more than kitted rifle.

Price difference is substantial.

Thanks for the thread!

Chris

PS. Is there a reason you didnt go with the magpul m lok tripod mount further up the stock?

CCK,

I have the UBH-35 as well, but it is currently mounted on a very lightweight tripod. Though the UBH-45 (with its 90 pound weight rating) is IMO the best bet, the 33 pound rating of the UBH-35 should be OK, especially with lighter weight rifles. Below is a photo of the two side-by-side for comparison;

The Magpul M-LOK tripod adapter will only work with Manfrotto ball heads. Just about all of the higher-end ball heads use clamps that accept the more universal Arca-Swiss style plate, which will not accept the Manfrotto-specific plate used with the Magpul unit.

In terms of location of the plate on the rifle I am currently of the thought that unlike a bipod attachment, for a tripod the closer to the center of balance on the rifle the better.

I’ve been running the manfrotto ball head with the larue adapter, the triclawps, and a hog saddle. After looking at theses heads I think I may pick one up. The manfrotto is good, but I not I’m at the limit with some of my heavier rifles.

My current set

Sent from my iPhone using Tapatalk

Here is a short video demonstrating the “gimbal action” of the Uniqball. The red outer ball is used for leveling (built in circular bubble) when the tripod is planted and the inner ball is used for panning horizontally or vertically. I tried to demonstrate how the Uniqball only moves in the horizontal or vertical axis and does not cant the rifle regardless of how it is positioned.

I use a RRS BH-55, way better than a pistol grip set-up. I’ve seen the Uniqball, never used one.

And for this application, a heavy tripod can be an asset.