Surprise in box of M855

Seeing things like this makes me think this stuff really IS seconds, no matter what is said. I’ve heard others pull many bullets and find a large portion not sealed, crimped etc but this is a strange one:

My first thought was “M193 projectile” but after comparing it to one it is even shorter and more blunt. I have no idea what bullet this is.

Pull it and see if it’s a boat tail. Maybe section it.

It is a very different bullet from M855, that’s for sure.

Is it magnetic?

Its an improperly formed projectile. I bet there is still a steel core and everything.

likely a 55 gr fmj. I definitely would not shoot it. Pull it and weight it if you can. Or you could send it to one of us to examine/pull down.

If you shoot enough of that stuff, you see a lot of interesting things. I’ve seen split cases and a couple times there were bullets seated backwards (painted and everything).

I have often thought the same thing on all of the Federal NATO 55 & 62 grain offerings.

It’s been stated multiple times by credible sources that XM193 and XM855 did not make the standards to be labeled M193 and M855. Hence the X identifier in the nomenclature.

Sent from my iPhone using Tapatalk

A mod here told be about the notifications he used to get on military lots of ammo due to his prior duties. I remember the frequency being alarmingly high. I wouldn’t chalk this up to much more than American mass manufacturing incompetence.

Shit. If Toyota made 5.56mm ammo, the reloading industry would be crippled.

Looks like two different weight bullets a 55grain and 62 grain on right.

My last job on my way out was driving a desk as the Land and Ammo NCO and I used to get emails from our ammo manager all the time about scheduling turn-ins for draws we had made that had lot numbers recalled. It was mostly mortars, but it happened probably once every month with rifle ammo.

To the OP: I second markm’s recommendation to send the bullet to a dude on the forum to pull it and cut it open. I would love to see if it’s just a standard FMJ projectile or a misshaped steel core round.

I have a bullet puller, but don’t know how cleanly I could section it.

Strangely I have no magnet on hand either.

So with only weak refrigerator magnets on hand I couldn’t get one to stick to it at all. Will look around for a real magnet today at work.

Yeah, this seems like a no brainier to me.

I’d also weigh the powder charge of it too and compare it to a known good 855. Either the wrong projo was loaded (likely) or an entire load of a different type made its way into a batch of 855s (doubtful based on its seating depth).

I don’t see a need to section the bullet. It should be obvious what it is. My bet is that it has the same powder charge as the M855… which would make it safe to shoot. But I wouldn’t gamble on that by firing it.

I’ve seen some weird things with American Eagle Green Box, like random rounds with a really bright muzzle flash (shooting indoors, dim dim BRIGHT dim BRIGHT dim dim, etc.), and bullets that aren’t set and crimped properly. I finally quit buying XM rounds.

Your pic is the weirdest thing I’ve seen with green box, though.

Agreed. There’s nothing to gain by sectioning it & it’d be a waste of a perfectly good projo.

I wish there was a way to get “firsts” again. I just can’t stop buying XM ammo though because what else is in this price range with full-house 5.56 NATO pressures/velocity?

Here’s one example. Ammo Seek or Gunbot will find you some great deals. There are plenty of affordable options out there.