SPR Build

The SPR is done with the exception of BUIS. Still looking at options on those.

Rainier built SPR Ultra-Match with Shilen heavy barrel on CMT upper, Gas-Buster charging handle, DD Lite 12.0, YHM Chrome BC and bolt, PWS FSC 556 Comp, YHM Bi-pod adapter, Harris low bi-pod, Leupold 6.5x20 50mm AO Target scope in LaRue QD Mount.

LRB lower with A2 stock, Timney 3LB trigger, DD Ambi Burnsed loop, USGI for the rest of the parts.

How do you like the Timney trigger? I have been pondering building an SBR, and have been looking at several triggers.

Thanks very much, and you have a very nice rifle, sir. :slight_smile:

Thank you for the kind words. I love the Timney. Have one in the 40-XB KS and the 700 BDL Varmint rifles. Of the ones I have tried, Timney is the one I buy. Excellent craftsmanship and they stand behind their products (I sure wouldn’t stand in front of them LOL)

Thank you for the info. I have an old Colt 20" 1/7 barrel laying around, along with enough spare bits to build a rifle.

The part I do not have is a good trigger, and a good piece of glass.

I may go ahead and try the Timney, then.

Very nicely done!
I hope to complete my SPRish project soon(minus the optics).
Congrats on a fine weapon…

Thanks guys. Next summer I hope to see how “Special” the Montana Prairie Dogs will think it is. :smiley:

Will be our third trip - only bolt guns taken the last two times.

Very nice sir. What length is that barrel? and is the gas tube rifle length or midlength?
Thanks.

This is the best gun porn I’ve seen all week.

Very nice build, thanks for sharing!

Do you have any more pics?

How does orienting the bipod that way work for you? Do you like it?

I have the same mount/bipod but I figured feet forward would allow shooting with the feet retracted with hands on the rails.

Regards,
~V

Sam — It is an 18" mid-length

Brit — Not yet, will take more and add to the post

Veeref — I don’t like it at all. That is the way the bipod was on a bolt gun and that’s how I put it on for the pics. Has been turned around since then.

Jerry:
Thanks. Your rifle is absolutely hot. Hope you don’t mind me copying the concept for my next project.

Nice build. I’m starting to work on an SPR myself using ARMS #38 Rail and a PRI free float rail

Sam — not at all. Please post pics as you start the project.

Prisonmike — sounds great, would like to see pics of your project as well.

Brit — more pics, as promised.

And a shot of the Carbine (it was feeling neglected)

Jerry:
Those are very nice detailed pictures.

I placed the order for the upper receiver. I didn’t see that yours is a CMT, so by coincidence, mine will be a CMT as well. :slight_smile: I just ordered the White Oak barrel, they told me 20 weeks. So you already know what the two major pieces will look like. It will be awhile before I get it put together. Next item to get is the handguard. Probably will go will DD M4 from Brownells. I thought about Larue’s rail but RobS 's rail chart showed the DD M4 rail is lighter and I can get it from Brownells for only slightly more than the Larue.

Sam,
That sounds like a great combo. Will be looking forward to pics.

How is the PWS FSC 556 Comp working for you? I’m getting a Ops Inc Muzzle brake and collar for mine, I gotta wait a while for my Douglas barrel blank to get turned. Forgive me If I overlooked the thread but did you post up any groupings yet?

a) I really like the FSC556 on the Carbine - really helps in position shooting (especially offhand)

b) Have not posted any groupings yet - the SPR has not been fired :o Range day is planned for July 6th. Will do a full barrel break-in and sight-in. Will let you know what old eyes can do.

Jerry,

Thanks for the great pictures. I was wondering if you have time to post a short range report on the new SPR? I was interested in that upper configuration and the Rainier sight says it should shoot 1/2MOA. Have you found this to be an accurate estimate?

Thanks,

Colter