I’ve heard/read that a spare bolt carrier group is recommended.
A thought hit me and I’m wondering how many bolt carriers have had problems?
It seems the bolt is more the issue, with the extractor, rings or whatever. So, is anything more than a spare bolt in order to get the rifle up and running again quickly?
A spare BCG would be - perhaps - recommended as a fast swap in the case your bolt or cam pin breaks; open the rifle, throw in a new BCG. Perhaps. I carry spare bolts and other small parts with known tendency for failure and the carrier isn’t one of those things.
I don’t expect any properly made carrier to fail, in any way, under reasonable circumstances.
Problems with gas keys can arise too, broken bolts, bad seal, etc. Perhaps less likely of an issue than with a bolt but a possibility nonetheless. An extra complete BCG, for not much more money, covers the bases.
I keep spare bolts and complete BCGs around.
Yeah, a complete bcg would be the quickest way to remedy a problem. But having a few spare bolts, gas rings, springs in addition to a few extra firing pins, retaining pins, and cam pins should be more than enough.
I certainly agree having a complete spare is the quickest way. From what I gather the actual carrier body cracking or failing is rare, so really what would fail first is the gas key. I mean if you had a MOACKS tool, wouldn’t replacing the gas key be a quick fix?
A quick fix if you are in the shop. If you are at a range or at a class and the gas key cracks, you’re screwed.
Quite a few will take a spare rifle. However, I take a spare BCG as well.
Oh I agree 100%. If you are out and about, then having a full BCG(or spare upper/rifle) would be best for “just in case”. I think my mind went to default as I live on family land and shoot in what is essentially the back yard so if something goes wrong I just walk back over to the shop and can replace/repair.
I was commenting that IF the gas key were to crack, and you had access to the tools, then wouldn’t it be considered a simple fix?
I experienced that very problem with a very well known high quality BCG. (Not any of my LMT’s) It was just one of those freaky things that unfortunately happened and it’s extremely rare for this company, but happened. So I have extra BCG’s. Another part that I do maintain extra stock on, beyond just to have spares like LPK’s , extractor springs etc, are gas tubes. I have spare mids, rifle and carbine tubes. I get melonited tubes from BA when I order something from them, I’ll put a couple in my shopping cart.
Not that I personally have shot one out, but I have made them glow in the dark on many occasions and my friend recommended I get spares so I did.
With the election hypothetically working in favor of us gun owners, I plan on stocking up on spare parts for my weapons going forward. I spent a big chunk on ammunition and magazines in the Hillary fear spree, so I feel good on where I am at there. Some Spare BCG’s, bolts, springs, extractors, whatever. Just compiling a nice size parts bin that I hope I never need, but will have if I do.
I personally think that’s good idea. It’s been a big help to me, but also I’ve been able to help a guy out who needed an extra takedown spring because he shot both his across the shop. I picked this up from Amazon.
It’s got a top section where I keep all my spare springs. Selector switches, detents, firing pins, shims etc. then you pop the iron lid up and inside there I have like 4 BCGs, 5 or 6 Vltor buffers, spare mil spec triggers, ALG ACT triggers, brakes FH’s, fixed sights, folding buis… I’m just saying you will be shocked at how many spare parts you can store and it comes with plenty of dividers, the top secures down so small springs to jump bins. I went to Walmart and got one of those fishing tackle boxes, the single lid ones. In there I store my buffer tubes and springs. I have another one that I store picatinny rail attachments, grips etc. Illtry to post a pic of it empty.
I prefer spare BCGs. You can get a complete Toolcraft BCG with the cage code on the carrier for less than $100 shipped. I also found a place that sells hp/mpt FN bolts for $40 shipped so I get those too.
I went to Bravo and LMT for my extractor springs. Most of the other parts, springs, detents and such I use DSG Arms. They are solid as the day is long. I may have hit up Primary Arms on the firing pins. I’ll check my inventory sheet when I home. I can shoot that to you if you want to pm me your email. At least give you a start point. It’s a spreadsheet. So you’ll need a computer or I can print it and mail it to you. (You never know these days)