Some Questions About RCS Gear

Dealers/ Manufacturers/ Regional/ Info Raven Concealment Systems
1

So I am looking into possibly ordering some items from Raven and have a few questions;

For the Phantom holsters in the quickship menu- I would be looking for one for an M&P9c with no safety lever. However I do not see the option for the safety that there is in the main Phantom menu. How do I make sure I get the right one?

For the magazine carriers- both rifle and pistol- is there any way I can get an approximate lead time on those?
(I would have assumed 16-18 weeks as on the site, but not sure if these fall under “custom” items)

For the pistol mag carriers- will I have any problems fitting M&P Compact mags in them? Or will they run both sizes fine?

I’m sure I’ll think of something else as soon as I post this…:rolleyes:

2

Answers in red.

3

Answers in bold below:

If you have further questions, please ask.

Tom

4

Ha! Remembered it:

There was a mention of holster fit with different height sights (irons) on the FAQ:

Our holsters will usually fit taller sights. If you are running specific sights for a suppressed handgun, please let us know in the comments box when ordering. Please give us the specific measurements on you sights to ensure a proper fit.

I am assuming this means abnormally tall sights, but if I were to change out the sights on my handgun for other normal sized aftermarket sights (like Ameriglo/Trijicon), I would be ok?

5

Yes, you’ll be fine.

6

Great- Thanks!

7

Ok- back again. Since I’ve already got my own thread here…

Got a couple more questions:

  • If I want to order extra (standard) belt loops I’m assuming I would go here (http://www.ravenconcealment.com/accessories/owb-modular-accessories/owb-eclipse-modular-accessories-standard-owb-belt-loops) and order for my product.
    But what do I do if I have a MD cut pistol mag carrier? I don’t see loops for those mentioned anywhere, and I noticed from a couple carriers I picked up that the style is different on the foward MD loop…

  • For the Extra hardware kits, I noticed two different sets. What parts exactly do they contain? There doesn’t seem to be a list on the site, the pictures are both the same, and I’m not sure which to go with for my purposes.

8

Mention in the comments box that you have an MD Cut mag carrier.

  • For the Extra hardware kits, I noticed two different sets. What parts exactly do they contain? There doesn’t seem to be a list on the site, the pictures are both the same, and I’m not sure which to go with for my purposes.

We’re working on updating our hardware info/pictures. Here’s a quick rundown:

General Kit- (This contains every hardware item we use in our entire lineup.)

8x Orings
4x Slotted Post Backs (female)
2x Plain Post Backs (female)
4x Short screws (“#1 size” used for OWB belt loops)
4x #2 Screws (used for linking items together)
1x #3 Screw (used for dual mag carrier tension)
1x #4 Screw (used for 45ACP dual mag carrier tension, Sonny Rigs, and other misc projects)
2x #1 Flat head screw (Used for IWB Soft Loops)
2x #2 Flathead screw (Can be used for IWB Soft Loops)
1x 1" section of rubber tubing (DMC retention spacer)
1x Cut slotted posted (DMC retention backer)
1x Male Pull-The-Dot snap

IWB/OWB Kit-

8x Orings
4x Slotted posts
4x #1 Screws
2x #2 Screws

Eclipse Kit- (For linking items together)

4x Orings
2x Slotted Posts
2x #2 Screws
2x #3 Screws

ACR Kit-

8x Orings
4x Slotted Posts
3x #1 Screws
1x #2 Screws

9

Great thread. Just getting ready to order one for a M&Pc myself. Any current coupon codes out there I might be missing?

Thanks!