I’ve been searching the net for a nice clean method of securing the excess strap webbing on my Eagle/SKD Universal Chest Rig, and came across a couple items that might do the trick. This of course, would be an alternative to using black electricians tape/etc, which just isn’t desireable.
For years I used to see loads and loads of those Military-Industrial type black rubber bands, which were about 1" - 1.5" thick, and almost had the look of bicycle tubing. They were super tough rubber bands, and were great. However, I cannot seem to find them anymore, nor do I recall their proper name.
SO, I came across this item, which is sized and shaped exactly like the black rubber bands I used to see, as mentioned above.
Scroll down to the two LOWER LEFT products on this page: “TAG LBE Bands” and also “TAG Elastic Keepers”
Now I don’t know what the differences are between the two, but I’m thinking they MIGHT work for the purpose of securing the excess webbing that hangs off of my Eage/SKD chest rig. I should mention that the reason I want to SECURE the excess webbing, is because I like to have the option of wearing the chest rig over various layers of clothing in cold weather, and over a simple T-shirt in warm weather.
SO, check em out, and tell me what you think:
The next product I found, which, at THIS moment in time, appears to me to POSSIBLY be a slightly better solution, and seems to be made for this exact purpose. However, without having all the items here to try out, I cannot be sure which would be the most feasible. http://prostores2.carrierzone.com/servlet/emdomusa/Detail?no=47
What do you all think about the above products? Also, does anyone know about the black rubber bands, which favored the look of bicycle inner tubing, which I spoke of earlier at the beginning of this post?
I sure would like to find those black “bands”/gear keepers again.
I am interested in hearing what other products you guys may have found for purposes such as this?
Web Dominators work well. I also use two-sided velcro strips. The velcro comes in rolls and is about 3/4" in width and is available at most craft stores.
I clicked that link, and didn’t see any “web dominators”.
Are they the same type product that I linked above in my last link?
I’ll pass on the adhesive tape of any kind guys. OF COURSE it holds, but I’m not sure I want to have to cut tape off and leave glue residue behind (after long periods of the tape being in place), all because I want to make an adjustment to a strap?
Some straps might not adjusting often, but still, tape isn’t for me in this case. If I were out fighting in the sandbox, sure I’d tape everything, but I guess I just think a rubber band/etc would be so much nicer. Slide it up and down, and use it repeatedly, without cutting it and having to replace it any time I want to loosen it.
I can see the use for it though.
I tried the Web Dominators on My Eagle LEO Universal MOLLE Carrier and they were too small for the wider webbing. I just used good old black duct tape and it’s held up for a few months now.
On topic, I have some of the web dominators from Supply Captain and I like them. I will admit I haven’t put them to really hard use, but so far I haven’t had any problems. I tried the TAG elastic keepers but they didn’t have enough tension for my tastes. They just didn’t feel secure.
This may sound simplistic but i have used and still use black rubber O rings that I got from Home Depot. I use 1/2" and 3/4" rings for the excess on my slings and the same on my vest. They work well !
I have been using them for over a year now on my Kifaru Marauder and have had zero issues. Have a total of 10 on one bag. They are quick to undo, adjust and redo. Only suggestion is to keep them on the short side to keep the rolled strap nice and tight.
I also use them on my chest rig to secure my tourniquet. Useful little buggers.
I have used the double sided velco strips with decent success. The wider sizes seem to work better for me though. You should be able to find them in colors other than black by now if you care about color matching. For packs I tend to get a bunch of extra figure 8 retainers (have no clue what they are called) and thread them onto my straps. They can then keep the ends from flapping about. Figure out the min and max adjustment range and then trim off extra as needed.
Lately though I just use tape. Even el cheapo Chicom electrical tape doesn’t make things sticky after enduring a TX summer. Get some quality tape and you should be fine and not run into sticky straps.