So I threw an Omega on my factory Daniel Defense MK18. Other than the increased recoil and occasional bump fire when shooting from a barricade or off a bench it has been awesome. Now I expected it to get REALLY hot but not so hot that it would make the finish start to boil. I shot a 2 gun match and after double tapping about 14 targets I look down and see the finish coming off, im not too worried about the internal blast baffle showing heat marks. Im using the Silencerco Trifecta flash suppressor, 10.3" barrel and geissele dynamic 3 gun trigger, H2 buffer. Anyone having problems with their suppressor finish coming off, any recommendations, or is this going to get worse?
Yes, the byproduct of suppression is heat. 556 gets suppressors extremely hot (especially titanium) and eventually all your paint will burn off.
Cant help but ask the silly question, why would SilencerCo even bother doing this kind of finish on the can? I guess it doesn’t really matter I’m going to shoot it not brag about it.
Maybe titanium is more difficult to get a good high heat resistant finish to stick?
Good news is you can call silencerco and they’ll take care of the issue. My concern would be the finish wearing to the point it makes it difficult to read the info, I could see someone having a bad day trying to make a big deal out of not being able to clearly read the model # etc… Nothing illegal about it but may as well not give any Leo or range officer (I know only atf has “right” to ask for paperwork) any reason to take up more than a second or two of your time.
I would not be concerned about this. Have fun, shoots lots of ammo, enjoy your new omega, and live long and prosper.
Just polish it all off…
Not my pic…just a guy that made an adapter to use the Saker MAAD mounts on an Omega, and refinished his can.
I don’t think anyone should be concerned about it, I mean worse case scenario is you rubbing the paint off and your gtg.
I think the main issue, sorry to say, is an omega on a MK18. 10.3 uppers in 5.56 are abusive. Titanium can and only first baffel stellite and using a flash hider… IMO This can was not made for a Mk18 with any sort of volume firing schedule or rate of fire in my opinion…
Not saying it’s a bad suppressor overall… but for this platform I’m not supprised the finish came bubbling off in one mag…
Also, you might want to black out your serial on your suppressor in your pic. Just FYI.
Because someone is going to tell the cops that he stole it from him and then hope they ignore the NFA chain it took to get to the rightful owner? It seems as though this is probably about the safest serial number one could post on the intrawebs.
Good thing it’s full auto warranted down to 10" for 223/556
Edit: (At least that’s how I read it)
That’s how I read it also per their email with me and their website.
Since its engraved deep enough into the metal, I wouldn’t worry about this…
Wouldn’t anodizing eliminatate this issue? Wonder why they chose whatever coating they chose?
Side note, coating is cosmetic. Ti is corrosion resistant enough I wouldn’t worry about it.
Just saying… a lot of folks post pics with there serials and don’t think about it. I wouldn’t wouldn’t want my serials on the interweb. If I posted one and someone told me, I would be thankful. To each his own.
Firearms are different unless you live in a less-than-free location where they require firearm registration wherein that serial number is legally registered to you personally. I’ll wait for you to tell us what bad could come from posting the serial number for his suppressor. If you can’t think of a specific reason with a negative outcome we’ll just consider this exchange done. Don’t give us some bogus ‘well, I can’t think of anything off hand but better safe than sorry’ BS either.
I never said anything about something bad would come of it. I was simply stating that his serial was on his picture. Your views on openally showing serial numbers on suppressors obviously differ from mine. As I said… To each his own. That is all. No exchange was even needed.
Much in the same way your original post didn’t need to happen. Stop derailing threads with off topic chatter. This isn’t the forum for that crap.
This is pretty typical of any cosmetic finish on a suppressor like duracoat, cerakote, etc. The AAC finish is notorious for burning off. Same thing happens with the Surefire cans. The only finishes I’ve seen that won’t burn off are actual metal treatments like nitride, etc. and they still changes colors due to the heat. If I’m not mistaken, the Omega has a grayish cerakote finish. I assume this is because the tube is Ti. Silencerco’s steel cans, like the specwar, have a black oxide finish.
Finish is cerakote, it’s titanium underneath so nothing to worry about. Once it burns off Krylon and move on. Pretty suppressors don’t get used much.