Should I buy a PPQ??

After handling a PPQ M2 9mm the other day I’m seriously considering picking one up. The trigger is what really impressed me it’s the best I’ve ever felt on a polymer striker fired pistol. My range doesn’t have a PPQ to rent out and I don’t know anyone that owns a PPQ so I have to make the decision without having ever actually fired one. I’ve owned and shot just about every other major striker pistol out there but only kept my Glocks and a couple M&P’s. Anyone out there with any reason why I should or shouldn’t pick one up your input would be appreciated!

The PPQ is an excellent handgun. I have two of them, one with over 6000 rounds. I also have a VP9, which is also excellent and in that same pre-cocked striker category. I, very marginally, prefer the VP9 from the trigger standpoint. The reset on the PPQ is a little shorter which occasionally can promote a surprise bump-fire second shot.

They’re nice. After owning both I decided I like the VP9 better. I mostly shoot glocks btw. Buy it, why not?

This a range toy or for carry?

With all the aftermarket options available to Glock and M&P, I wouldn’t buy a pistol just because it has a good factory trigger.
If you are buying it just because (which is cool) you should check out the VP9 as well (I run a VP9), similar ergos. PPQ is a little shorter in the grip, which helps for carry but won’t really matter if its a fun gun.

I only buy guns for carry or home defense. I owned a VP9 and ended up selling it. The trigger really is the main reason I’m considering the PPQ. I’ve tried several aftermarket Glock triggers and non of them were even close to the trigger on the PPQ. I guess I’ll just pick one up and give it a shot if it doesn’t workout I shouldn’t have a problem selling it. Thanks for the input!

What does the PPQ need that isn’t available on the market?

I’ve had a PPQ M2 for almost 3 years now. It’s an alright gun but I think they are over hyped. The trigger is quite crisp.

I personally have problems with the ergonomics. When I try to get a high tang grip the inside of my primary thumb rubs the frame and quite frankly it hurts and keeps me from getting a really high grip. Not matter where I rest or flag my thumb this happens. If I lower my hand a little it’s not an issue and it feels great. If I wanted to do nothing but print small groups at 25 yards then this wouldn’t be an issue, but for a defensive gun I want a high grip on the gun.

I also personally don’t like the curve of the trip but this can be fixed with an APEX trigger.

I know I’m in the minority but these are my findings.

I’ve been carrying and shooting my PPQ for around two years now. Other than night sights, I see nothing the pistol really needs out of the box.

You should have zero reservations about getting a PPQ, especially if you like the trigger. I have 3 PPQs and have run them hard and have never had an issue. I also own Glock, M&P, Sigs, etc, and have shot a VP9 on a few occasions, and the PPQ is my go-to gun that I carry every day (i did upgrade my sights).

I really like the VP9, but i don’t think it offers anything you don’t get with the PPQ - except maybe the HK namebrand. If you like the PPQ and prefer the PPQ trigger, I don’t think there’s any reason you shouldn’t get one.

I am on my second, however with that said I do not know if I would go for a third. It is a good shooting pistol.

A lower bore axis
Bigger magwell opening
Less intrusive slide release levers

It’s a’ight.

If you want one and can afford it, it isn’t bad at all.

But it won’t be a straight Glock replacement.

All that answers to threads like this ever show is that we shooters are very much individuals with different likes, dislikes and preferences when it comes to handguns. But since you asked, here is my opinion.

I own 14 striker fired polymer handguns and have owned others that I didn’t keep. My three favorites are the PPQ, VP9 and FNS-9. If absolutely pinned down to name the “most favorite” it would be the PPQ. I have an M1 with paddles and an M2 with the button release.

Unless you want night or different sights the PPQ needs nothing from the aftermarket. The ergonomics are outstanding, something it shares with the VP9. Also the long thin and unobtrusive slide releases are excellent. I like them better than any slide release on any gun I own. The PPQ feels solid yet lively in my hand as opposed to the dead feeling that some handguns impart. I enjoy shooting most any handgun, but none more than my PPQs.

The trigger is what many people talk about and it is the best striker trigger I have felt, beating out the VP9 very slightly. It isn’t super light but it is very smooth which make it seem lighter than it actually is. It carries well and is comfortable to shoot. Besides that it’s just a good looking handgun in my eyes.

I’ve never understood the practice of buying a new gun to immediately start sticking after market parts on it. And I certainly fall into the camp of people who never, ever change the stock trigger on a carry gun. After owning Glocks for 20 years the only change I make on them is better sights. If the stock trigger isn’t adequate then find another gun which does have a good trigger. I like my G19s but, if it came down to them or my PPQs, then the Glocks are gone. But it won’t come down to that so I get to keep, shoot and enjoy both.

OP, my opinion is that you should buy that PPQ. To me the PPQ and about 3-4 others, including the VP9 and FNS-9, are at least half a head above all other strikers that I have owned or shot.

Again, it is all personal but, beware the brand fanboys on various shooting forums who can only love one brand in their little hearts. They seem compelled to disparage any other brand or model, often without any real world experience whatsoever with the gun they are criticizing. Their opinion is often as slanted and biased as an MSNBC report on Hillary Clinton.

Hopefully you can somehow have the opportunity to shoot a PPQ. When I started reading about the Q I was able to rent and try one out. That tryout was all I needed and I owned one within a week. But it was the performance that sold me, not the brand, since it was the first Walther I had ever owned. Now, two years and several thousand rounds later, the more I shoot the PPQ the more I appreciate it.

Good luck with your decision.

I would love to see one with:

  • p99 slide release but ambi
  • M1 paddles
  • little heavier trigger, like P320
  • SP 2022 stippling

I would have gone totally PPQ years ago except for the huge slide release.

Best striker fired pistol on the market IMHO. I own 4, love them. Three are the PPQ Original (M1) and I have the 5" M2. I own Glocks, M&P and have owned XDs and XDms. PPQ is my favorite by far.
I’ve tried a couple of VP9s when they first came out, to compare to my PPQs, and passed. I had one pre-ordered, and was underwhelmed.

Of course, you’ll get a variety of opinions. Take it for what it’s worth.

I like my M2 Navy quite a bit. I do carry it quite a bit and its comfy in the CCC Nano. Do I like it better than my G19? No, but the trigger is better, so if that’s an issue for you, its certainly a viable option.

Not much. The OP mentioned he already had Glocks and M&P’s so if he’s just looking for a good trigger, there are aftermarket options available rather than switching to a new platform.

When you consider the whole package (ergos, trigger, accuracy) it is a fine gun and one that I have considered many times, just not enough of a difference from my VP9 to warrant a switch.

I like my PPQ very much. It’s accurate and points naturally. Trigger is good, the grip is a natural fit in my hand and I can shoot it well one handed or two. I’ve never had it malfunction in the 2500 or so rounds I’ve run through it. I carry it a lot and haven’t had any problems from dust, rain or other environmental conditions. I don’t clean it religiously, but I don’t let crap accumulate.

The sights are plastic and the front is getting a bit rounded. Slide serrations are large and easily grasped. They are also sharp enough to eat through tee shirts where the material is pulled over the pistol. Slide release lever is too long. If I’m not careful, my thumb will press it down and the slide won’t lock back.

Factory stippling is a bit smooth for my hands. I used bits of skate board tape for a better grip. Trigger guard has a bit of a sharp edge that rubs the knuckle annoyingly after a few rounds. One of these days, I’m gonna chase it down and do something about it.

The recoil spring has a plastic guide. It works well enough, but it’s starting to bend a little. The spring is getting worn- all recoil springs are wear items- and I’m going to replace it. Recoil is starting to feel a bit sharp. My wife has an almost brand new PPQ and it’s recoil is softer. Time for a new recoil spring.

I like the paddle mag release much better than the button release and I’ve been a 1911 shooter for decades. It’s not much different than using the mag release of an AR.

All in all, I’m very happy with the PPQ. It’s rugged, reliable, accurate, balances well, points naturally, simple to use and is quick. Magazines release and insert smoothly and fully loaded mags lock in place easily even when the slide is closed. It’s got one or two quirks, but the good far outweighs the bad and the ugly. In answer to your question, yes, you should buy a PPQ

I found mine to sit a little high in my hand and to be a little more snappy compared to my M&Ps, VP9s and the Glocks

But it returns on target quick, as well