I’m planning on building this setup and wanted to get some advice. everything adds up to right at $1,832(minus BUIS and optics) and before stamp/engraving of lower. or i can just get the complete rifle from a dealer on here for $2,199. just trying to figure out which way would be the smartest route.
also if anyone knows where i can get the parts listed cheaper post up or pm me. (or if i forgot something please inform me)
Noveske Light shorty switchblock upper (member on here) $1,266
Noveske Gen II Lower Reciever (G&R tac.) $245?
G&R tac. Opt 2 LPK:
H-Buffer (if i should go with a different buffer for a 10.5" lower let me know… will also end up as a primarily suppressed rifle)
Tactical Springs CS Blue Buffer spring
LMT rec. extention
LMT castle nut
Noveske QD plate
Magpul MOE FDE grip (G&R tac.) $214
My suggestion would be to go through a dealer and get a factory SBR. That way the damn thing will at least have some resale value should you decide to sell it later on down the road. Form 1 guns don’t really keep that much residual value.
With a purchase this big, pinching a few pennies is foolish IMHO. Get a factory Nosveske and know you have nothing to worry about. Factory warranty, factory checkout, better resale down the road, etc.
Would you rather own one made by Noveske or some random gun plumber? Would you rather spend the engraving money on Noveske’s assembly skills and R&D or the artwork of your local trophy shop’s engraver?
Once your lower is SBR’d (NFA approved), you can put any upper on it. You can also remove the lower from the NFA registry. Losing money is negligible if you plan on always having the SBR lower. You can always sell the upper.
Or build it yourself using quality parts and a known engraver. Saving money is fine, but IMO, Form 1 a lower and you only need the uppers from there on out.
If you have to proper tools, the know how and the money I would consider doing it yourself. If you don’t meet those criteria, then buy one.
I decided to build my own because there was not set up out there the way I wanted it, with the options that wasn’t going to cost alot money. I saved quite a bit by doing it myself, even after paying the tax stamp.
I don’t see it as a big deal. Your point might have some validity if the rifle were “plumbed” from suspect components, but a pretty simple inspection of the rifle, test firing, and inventory of the component parts will provide reasonable attestation to the rifle’s overall quality. That includes info on who actually did the engraving. Personally, I have complete confidence in the engraving skill of Ident Marking or Orion Arms…one doesn’t have to use the local trophy shop. Nevertheless, I understand your point relative to buying a rifle engraved with someone else’s name, no matter the engraving quality nor how discreet the location, and whether or not the rifle had been removed from the NFA rolls. That was the point of my question.
For me, the concept is pretty moot since I don’t ever envision actually selling any of them, but if I did, my most likely victims are going to be friends or colleagues who are going to be OK with my plumbing skills. To anyone to whom I’m likely to sell any of my SBRs, my skills as a gun plumber (such as they are) are a known quantity…I’m not a “random gun plumber”.
I am planning to build my next SBR as soon as I make the time. I have all of the parts and tools. I want to build it to gain a better understanding of my guns.
Exactly. All this fuctardation over engraving a 100 dollar receiver. I personally don’t spend my time gazing at my lower’s markings. So I couldn’t give a shit less…
As long as it doesn’t say Olympic Arms or LWRCi on the side, I’m not worried.
Because the OP is wanting a Noveske and not some franken BCM/Staggun and further more the cost savings do not justify the means.
If two SBR lowers are placed before most folks on this forum (or any for that matter) and one is factory Noveske and the other has Richard Kimball Trust, Maddisonville, TX engraved on the damn thing… all things being equal - they will choose the factory Noveske. I think even Richard Kimball of Maddisonville, TX would have preferred to have the lower from the factory too especially considering Noveske’s no BS lifetime warranty.
I just feel like I am talking to myself sometimes.
You are missing the point. Ok, let me try and break this down. I know what the OP was asking as he isn’t the first, nor the last.
If he wants to do it cheaper or the smarter route (building it yourself can be an option). The lower is irrelevant because unless someone is obsessed with a rollmark, it doesn’t make sense. Unless it is a special lower.
In addition you will have a much easier time selling the upper separately (which means no 200.00 tax and no BS) than you would trying to sell the entire weapon.
So he could keep the lower and then add whatever upper he wants to it (let’s say a 16") and everyone is happy.
So at the end of the day if those two lowers you mentioned were sitting on a table, yes the one without markings would be a seller. But, I wouldn’t buy it when I know that I could save money and use an exisiting registered lower, use one in my safe and register it at my leisure or any other number of things. I hope this makes a little more sense now.
IG, you make a lot of sense here. I can easily see your logic.
To the OP. I added up your totals and came up with a total cost of $2,047.90. I just purchased a complete Noveske 10.5" with Switchblock for not much more than what you are planning on putting together. If I knew enough to put one together competely myself and wanted the satisfaction of doing that then I’d go your route. I don’t know enough to do that by the way. However, purchasing a complete weapon from a quality manufacturer like Noveske and having the warranty also is very attractive. In the future I might do it all myself. For now I have a complete weapon on the way from Noveske.
Getting a factory gun because you want a factory gun is cool. But worrying about resale or marketability on a $100 AR lower is nuts. If I have an SBR, I’m NEVER selling it.
It’s not worth the ass ache. I’d get rid of my SBS in a minute if it weren’t for the transfer hastle.
But like an AR lower, an SBS isn’t worth enough money for me to deal with an ATF transfer like it would be for a 10k dollar Machine gun.
Aren’t the uppers under warranty? I’m pretty mine was. So if he buys a good lower and uses a good parts kit, then he shouldn’t have any issues, correct?
Correct. Not contradicting you at all. My main point is that I am purchasing a factory weapon very similar to his for about the same money and I don’t have any worries about messing up the build myself. If anything is wrong I have the manufacturer to go back to. If I was as accomplished an amorer as you are, and I say that with all due respect, I’d certainly build it myself.