I noticed that all of the 12.5" barrels that I have looked at all come with a carbine length gas system. Can you put a rifle length gas system on a 12.5" barrel? I have never done anything with a barrel that was shorter than 16".
Definitely not. There wouldn’t be enough dwell time for it to get enough pressure to cycle the bolt. There were questions about whether mid-lengths would work on a 14.5 inch barrel before BCM worked out the kinks, so I can assure you that a rifle length won’t work.
IIRC a rifle length gas system is ~12" long so I would say the answer to your question is no.
What I am planning on doing is mounting a 12" free float handguard. Could I just leave the carbine length gas system if I use a 12" handguard. I only want to leave a half an inch because I want to use the Noveske kx3 flash suppressor and I want it to run right out of the handguards without being able to see any barrel.
So would I still be able to mount a 12" rail system?
Your rail doesn’t care what length gas system you have unless you’re using a FSB or gas block that would somehow interfere with the rail.
If your question is, can you mount a 12" rail on a 12.5" bbl carbine gas systme AR, then yes! you can. Of course you’ll need a low pro gas block
Rifle gas system is 13.2 inches long.
Thank you guys, I am new to this build with a short barrel so sorry if I come off ill educated. Thats why I am here though. Problem solved.
Thanks for the clarification. I couldn’t remember exactly.
A KX3 on a 12.5 is nothing but wasted money. Why not put something on there that will actually reduce flash and recoil?
why do you think that it is wasted money?
Do a search using the ORANGEsearch button at top and you will see what the intended purpose is. There are better options out there.
I wish Noveske would quit even including the KX3’s on their SBRs, so the neophytes who browse their site wouldn’t think it was some uber-cool, must-have accessory.
Noveske knows how to build an SBR that doesn’t need a KX3, so why do they persist in pimping them on all their guns? Must be a high profit margin item…
It even says on their website that kx3’s are made for sbr’s.
I dont care how cool it looks, I just thought that they were designed specifically for the sbr. I would of thought that because of that you get better performance. I have never owned an sbr and this will be my first sbr build. So I am just trying to get a little information out of the guys who know what they are doing. What do you think about the battle comp black oxide flash suppressor?
I just did a little orange button reading and I want one even more now. They say that it actually suppresses sound. I don’t care if it is only just a little bit, the m4 is a loud weapon.
The pig “redirects” sound at best. I tried one for a brief period and from the shooters perception, could not tell the difference in sound signature from a pws fsc-556 I was running along side it.
Remember, if sound signature is reduced at all, the BATFE then deems the device a suppressor and believe me when I tell you: you, I, nor the BATFE will say that the pig reduces sound. Save your money.
:suicide2:
Not enough barrel there to use a rifle gas, plus ur gun wouldn’t get enough dwell time to be anything more than an expensive single shot AR.
i ran a Noveske KX3 on a 10.5 build. It not only made the gun more obnoxious, it also added way more weight out front.
I currently run a Battle Comp 1.0 on my 10.5, and couldn’t be happier. Recoil/Muzzle climb is reduced, muzzle flash is reduced, and well there just isn’t much u can do about sound… The shorter the barrel the LOUDER it gets…
It’s not going to reduce sound in the least bit, if it did the ATF would consider it a Supressor. The KX3 was designed to increase back pressure/dwell time (not needed in a 12.5 or any SBR with a proper gas port size) on short barreled rifles. It may direct the sound more forward but it sure as hell wont make it quieter.
If not using a supressor a battlecomp would be my first choice with any gun.
If shooting supressed, I’d put a muzzle brake on there. I’m going to put an AAC Brakeout on my 12.5 SBR when I build it.