I was looking at options and was going to go the noveskie route. But this looks much cleaner. Nice!
I was thinking of doing this myself. Do you mount the handstop at the 6 o’clock position?
Magpul released v2, or as they call it, Gen 2, when they launched the Mid-Length MOE. And they chose not to include slots or holes in the rear area. Now, Gen 2 in all three lengths are out and there is no built in QD or slot. So we saw a “Hole” in the design and filled it with our QD MICRO MOUNT-N-SLOT.
MOUNT-N-SLOT
Has this product been released yet? I didn’t see it in the online store…I’d LOVE to give one of these a go. Using the ‘standard’ MOE QD cup but a low pro option would be so much better. Been really digging my other M-N-S stuff!
That’s an important question for me…on the carbine-length MOE, there’s only about 0.820 inch of room to mount it with the ears horizontally and about 0.870 to mount it with ears oriented vertically.
What’s the overall length of the device?
Hmac… Where are you measuring from?
This is how I see it relative to my mounting hopes. It if doesn’t work, I’ll just keep the regular Mount N’ Slot I’ve been using on this particular rifle. It’ works fine as is, but I wouldn’t mind a little lower profile for the QD socket.
Hmac,
I’ll post a few pics of the install on my personal Carbine MOE this week. Thanks for posting your pics!
MOUNT-N-SLOT
how did you verify how far back you could mount it and not get into clearance issues with the barrel or barrel nut?
Rob, maybe this quick snap taken with the bottom of the MOE will help:
I kept it forward of the “dished” area on the inside of the MOE, it came out fine.
We modeled in SolidWorks each length of MOE hand guard and determined placement areas. That’s why the QD MICRO MOUNT-N-SLOT works on a MOE.
We’re professionals.
MOUNT-N-SLOT
Thanks HeavyDuty! Your pic shows how much clearance and placement options we designed into the QD MICRO MOUNT-N-SLOT when installed on a MOE.
We’re professionals.
MOUNT-N-SLOT
Looks cool, but I have an MS2 and I think I’ll be picking up a snap hook.
Any thoughts to selling MOE’s with the QD MICRO MOUNT-N-SLOT already installed? Either way, any chance you’ll stock the mid-length MOE in foliage green? I’d love to order the forend, QD Micro, hand stop & scout light mount all on one shipping tab! 
So…the device will fit on the flat closest to the delta ring on a carbine-length MOE then?
Looks like a good solution, any info you can share on availability?
Yes. We’re launching a cutting edge website using Python this month and will sell all MOE lengths and colors with a single or Ambi QD MICRO MOUNT-N-SLOT installed, for a small upcharge, which covers set-up and labor, over the QD MICRO and a MOE if you purchased them separately. This will come with a lifetime warranty, like all Impact Weapons Components products.
MOUNT-N-SLOT
HeavyDuty’s pic speaks a thousand words regarding fitment. They will be available to order / ship this week.
MOUNT-N-SLOT
Yep! All MOE lengths and colors with the QD MICRO MOUNT-N-SLOT installed in either side or Ambi.
And a single order for the components you listed would be charged $5.95 S+H.
MOUNT-N-SLOT
Of course, half the words are either obscene or in pig Latin…
Well, yeah…but about fitment on a mid-length MOE. I just wanted to be sure there was enough room on a carbine-length MOE.
Good to know they’ll work on that shorter MOE. I’ll keep checking the site and put in my order.