Rattle Can Paint Job? Check this out

Picked up a bunch of various Rattle Can “Camo” paints. Rust-oleum now has its own line of “Camouflage” paints

Pic is kinda rough, but you can get the general idea.

Just thought Id make a color pallet of whats out there to help you guys decide.

Colors used and as labeled in the picture(top down)

  1. Rustoleum - Dark Taupe ------ Drys close to MagPul’s FDE
  2. Rustoleum - Khaki Camo ------ Drys very light
  3. Rustoleum - Green Camo ------ Drys almost a Greenish Grey/Blue Grey, but still looks good
  4. Krylon - OD Green ------ Drys a Blue Green, not a good color
  5. Rustoleum - Army Green Camo ------ a very Yellow Green color. Not sure why its called Army Green

Hey JW, the sample of color pallet is a great idea; I’m a visual guy so I like the idea of seeing an example before deciding.D

Thanks jwfuhrman, I’m going to paint some parts on my upcoming build and was going to go with
krylon OD but now I’m thinkin’ Rustoleum Dark Taupe since it “Drys close to MagPul’s FDE”. Any comment on durability of Rustoleum vs. Krylon on metal?

Only down side to Rustoleum’s Dark Taupe has a slight shine to it when dry. I just use a piece of very fine sand paper and it took the shine off, and smoothed it up.

It also holds up alot better than Krylon did.

Have you tried the Krylon Ultra Flat Camo? It doesn’t have a shine if you do it in warm weather.

yea, the Krylon OD Green Camo that is pictured is part of their Ultra Flat camo line. I have found NONE of the camo colors end up drying ANYTHING close to the colors they are supposed to represent, EXCEPT for Black… which obviously thats going to dry black.

I like Rustoleum Earth Brown.

I have used in combination both krylon and rusto, bothe seem to hold up equally well. I have a few personal painted like this and have used the same combo on three or four work guns.

interesting, where can I find this paint at? Haven’t seen it at a Wally World or a Hardware store(Ace, True Value, etc)

That’s funny; all I can find here is Rustoleum; Menard’s carries it. The colors work OK for me- I stick with the camo colors and black.

I’ve had pretty good luck with Rustoleum so far. My painted gun has been through all sorts of crappy weather and its held up fine. The high traffic areas (grip, cheek weld) tend to wear out a bit, though.

ha, wow, I just did a google search for the Rustoleum Earth Brown… that was the 1 color I decided to NOT get while I was at the hardware store… looks like Im getting it on my way home today… Thanks

The biggest problem here is that computer monitors all display colors differently, and the only way to get anything close to true color fidelity is to have a properly calibrated monitor, typically a high-end one.

The idea could be useful if the same person using the same camera on the same background took the pictures and then color corrected them and posted them up. Then you could have at least an idea of the variations, if not the true colors.

It’s a good idea though, and I can see where it would be very useful for those trying to decide on paint colors. Hopefully, given the shortcomings of color reproduction with computer monitors, someone will still be able to do some comparisons with images like these.

That being said, if you’re painting with rattle cans, do yourself a favor and find/order some Aervoe. It is superior for these applications over almost all others and is worth the wait.

I think jwfuhrman’s idea is sound, especially if the “swatches” got grouped in a way that showed colors that work well together for specific environments, and that this thread could turn out to hold some useful information. In light of that, y’all might want to watch and not turn it into another painted rifle thread, lest it get folded into the existing one or closed by a mod.

I’ve used a lot of different paint on different guns over the years and as expected, they wear over time. I always thought, no big deal, sand, clean, repeat.

I never thought to use a spray primer prior to painting. Has anyone tried this and noticed a difference, especially in high wear areas or in plastic parts? I may try it on some of the work guns.

I’d like to know something similar. Anyone used a self-etching primer? I’ve used it on car parts and was curious if anyone had tried it on steel, plastic or aluminum rifle parts and whether the top coat lasted longer.

I use nothing but Aervoe camo paint. The “Light Coyote” is a dead match for FDE and the “Highland” is true Coyote Brown.

Mike:dirol:

Good information here. I’ve used Duracoat a lot, but for my truck/coyote rifle, I have considered using the Krylon camo paints. But I hesitated to use it on the barrel. Does it stand up to a hot barrel without burning off?

I’ve never heard of Aervoe. I’m going to read up on it.

Thanks,

Will

Will,

Skip the Krylon and go straight to Aervoe. It’s hard to qualify in words except to say that it’s just better quality paint all around. It goes on better and is more durable.

As far as it goes, I spray painted my barrel, and the only loss of paint has occurred at the flash hider. Of course, I’m not doing full-auto beta mag dumps, and YMMV, but a lot of people have painted their barrels and not had any problems with the paint burning off.

For those folks that were looking for them, if I remember correctly, the Krylon Camo: http://www.krylon.com/products/camouflage_paint_with_fusion_technology/
is available at Walmart, If I remember the colors available were black, khaki, olive and brown. The Rustoleum Camo which is available at Home Depot I think: http://www.rustoleum.com/CBGProduct.asp?pid=124
The colors available were black, khaki, earth brown, forest green. I hope this helps the folks looking for them.

That Earth Brown looks great. :cool:


I used Camo Paint and the rubber stuff that stops a silverware tray from sliding in the drawer to get the pattern.