Proper set up of VCAS

I have a victory model 2 pt sling, but it didn’t come with info on how to properly set it up.

Any advice?

Thanks

right here:

http://www.blueforcegear.com/pdf/INSTRUCTIONS_VICKERS_SLING.pdf

Thanks!

I also have a VCAS, very nice design guys.

Are there any online instructions on how to set it up without the Removable Quick Release or when moving the Removable Quick Release to the front?

Thanks

thanks for the link, I just got one too and could not figure out the best setup

Got a question that i hope some one could answer. On the padded VCAS sling is there a difference between the acetal adjuster, and the regular one. If so which is better?
Thanks,

All the shooters in the office use the Acetal (plastic) adjuster on our slings. While there are still customers out there that trust the metal adjuster over all others, we really only push it on the slings designed for belt-fed weapons where resistance to extremely high temperatures are necessary.

Official answer from our website:
Wondering what adjuster material you should select? Here is what we tell folks who call with this question:

The personal rifles of every shooter in our shop and Larry Vickers all wear Acetal Adjuster slings. We recommend our Acetal Adjuster without hesitation.

More info:
Both adjuster types and the Vickers Slings are Patent Pending and both are covered by our Lifetime Warranty.
Metal Adjuster: The metal adjuster is the original quick adjuster invented by Blue Force Gear®. It is machined from billet aluminum before being hard coat anodized like an M4 receiver. Because the metal adjuster has a higher heat resistance than the acetal adjuster we use it exclusively on the Vickers SAW and M240 slings where high heat is unavoidable. In our opinion, heat resistance is really the only advantage of the Metal Adjuster.

Acetal Adjuster: This adjuster came later as we had the time and resources to invest in molding dies. It functions the same as the Metal Adjuster at a lesser cost. Acetal adjusters are quieter and won’t scratch your weapon. Acetal resins are among the strongest and stiffest of all thermoplastics, have a good fatigue life, low moisture sensitivity and high resistance to solvents and chemicals. We use the same proprietary military-grade ITW resin in our adjusters that we use in all of our other polymer sling hardware.

Thanks for your response. I ordered a padded Vcas last night, and i am excited to try it out.

I beat on my acetal VCAS in lots of innovative ways in Afghanistan (patrolling, in vehicles, flying, etc.), no issues whatsoever. Unqualified recommend.

Another question. I got my padded vcas and it is on the gun, it is a nice sling. On the lite rail i attached to a QD swivel, on the rear it goes through the m4 stock. I can disconnect the front at the QD, but i would like to be able to disconnect at the rear also. On the website i cannot find what i need for this. Could someone send me a link?
Thanks,

It’ll depend on your stock;standard ribbed USGI collapsible stock? Really about your only option is the QR kit. If it is an aftermarket stock and has the push button socket, the push button swivel is an easy answer.

HTH

STephen