Problem with Zero on Eotech 551 **UPDATE**

I picked up a used 551 from a buddy the other day. He had purchased it used from a friend of his. He had no problems zeroing it. I mounted it on my 6920 and took off for the range. The first few shots at 25 yards weren’t even on paper. I aimed about 15 inches high and it hit almost dead on. I tried to adjust the elevation and noticed the screw was almost maxed out, it barely moved and I wasn’t getting the usual clicks. There was a lot of resistance and it felt like literally driving a screw into wood. I kept at it and noticed that the screw had popped back into being flush with the housing and I was getting much more adjustment out of it now. At one point I adjusted it to the maximum in the up and down range and tried to set it back to the middle of that, 40 clicks from max is zero is what I understand. When I looked at the reticle it was about halfway down the FSB. That’s when I maxed it out to get it back on target. By the end of the day I had gotten the rifle zeroed but I had maxed out the elevation again. I’m thinking there is a problem with the optic. Any suggestions?

Just for future reference never try to push past unusual resistence in the turrets or in this case the two adjustment screws on the side.

Second are you sure its a real EOTech?

If it is one of the previous owners may have damaged it, and got rid of it. You can damage the workings on the inside if you adjust it too far out of range. If you felt like you were putting a screw into wood its very possible its messed up inside, and why the reticle is halfway down the FSP at mechanical zero.

Yeah it’s a real Eotech. Both former owners are police officers and we all know each other well.

Going off of the description for the level of resistance being met, I’d recommend sending it to EO for a look. SOMEthing’s out of whack with the adjuster(s) if it’s moving in and out of a consistent resistance, which means it may be moving in and out of it applying the clicks you are attempting to induce.

When trying to find the mechanical zero, or center of your range-of-motion on an adjuster, forget “it should be X clicks.” You never know how drunk the little old biddy-hen at the factory was the day she put your EO together.

Turn to end of movement to one side, then turn it to the extreme on the other end and count clicks to find out what the actual number is. Divide by 2. Take that result and count back to center. Applies to both axes of movement.

If you end up with the total-clicks being an odd number, some half-wits will freak the f**k out, and I’ve never figured out why. All they need to do is grab their package to remind themselves to not be a total Nancy and just round up OR down to the nearest even number and divide by 2.

On my 512 as I was shooting the reticule was moving off to the right with every shot, ended up the reflector inside had come loose, and had to make a trip back home. It celebrated it 1 week b-day back at eotech, and its 3rd week b-day with a new owner when I got it back.

As far as sending it back to Eotech… Is anyone familiar with what the prices would run for looking at it and performing any fixes? I have $275 in it now, I’m hoping not to have to spend much more. Any chance of getting a repair covered by them?

When I broke mine due to my negligence, they repaired it in a timely manner for 60 something dollars IIRC plus shipping. They actually just replaced most of if not the whole unit.

That’s a deal. If I get anywhere near that I’ll be thrilled. That’s also why I’ll keep buying their products. This is my 4th but the first I’ve purchased used.

I would like to update everyone that has read this thread… I sent an email to Eotech and they replied quickly. I have sent the sight to them to have it fixed at their cost. This is a 4 year old sight by the way. I could not ask for more from a company as far as standing behind their product.

My sight arrived at their facility last Wednesday. It arrived back home today. They have fixed the problem, at no charge, and got it back to me in a week. Additionally, I forgot to tell them that the reticle wasn’t adjusting as bright as it should. I checked that today and it was fixed also, without me telling them about it. Clearly they perform function tests to confirm their repairs and noticed/fixed it without hesitation. Outstanding customer service to say the least.

Very nice! Now only adjust the windage/elevation using a coin and very light finger pressure.