Ah, the rifle! My favorite weapon system. Accurate, powerful, far reaching. . . hell, you can even stick a knife to the barrel and stab stuff with it.
When it comes to the rifle there are a few things that must be worked on fundamentally of you want to make real progress when it comes to working the gun efficiently at combat relevant distances. The biggest thing to remember is that consistency is the key.
Trigger control.
Absolutely essential. At the very core, trigger control is marksmanship. It is the skillful manipulation of the trigger straight to the rear without disturbing sight alignment or sight picture. Trigger control must be smooth. Regardless of the speed at which shot are fired, the trigger must work smoothly straight to the rear until the shot is fired. Finger placement on the trigger is not as sensitive as when using a pistol, but when I am shooting for precision, I use the same spot on my finger as when shooting a pistol- which is between the center of the first pad and the joint of the index finger. When shooting for most use I am more concerned that the shooter can manipulate the safety without moving the firing hand. From there the shooter simply drops the index finger to the trigger where it naturally falls. I find that if I use the precision trigger finger placement my split times will be longer than if I use a joint or the middle finger bone.
When shooting, only the trigger finger can be permitted to move. I like to explain it as a “press”, not a “squeeze” or “pull”, to instill what the movement should feel like. When shooting for precision, the trigger finger must exert pressure on the trigger with smooth gradually increasing pressure, allowing the shot to break without anticipation, maintaining rearward pressure on the trigger until the shot has fired. Once the shot has broken the trigger finger smoothly releases pressure until the sear reengages the hammer, and the cycle continues.
Trigger control must be practiced to seat it as a subconscious skill and maintain it.
Sights.
Sight alignment and sight picture.
With iron sights sights with a peep aperture, sight alignment is a three part relationship between the shooter’s eye, the center of the rear sight, and the tip of the front sight. For precision shooting the shooter must be focused on the tip of the front sight. The front sight is held in the center of the rear sight aperture. The closer the eye is to the rear sight the larger the aperture will appear and the more difficult it will be to perfectly, consistently align the front sight in it’s center. While nose to charging handle will give the shooter consistent eye relief, the shooter can make sight alignment easier by bringing the head and eye rearward, which makes the aperture appear smaller, and therefore easier to center the tip of the front sight- the disadvantage is that more of the target will be obscured by the rear sight.
Cheek weld and practicing quickly acquiring proper cheek-weld will assist the shooter in achieving acceptable eye-relief rapidly.
When shooting optics for precision it is crucial to have the eye looking through the optical center of the sight. With magnified optics this is achieved by placing the eye at the correct distance from the occular lens, which is the eye-relief of the scope. With non-magnified optics eye relief is not as sensitive, and as long as the shooter is acquiring consistent eye-relief he will be ok. With magnified optics when the eye is at proper eye-relief there will be no scope shadow visible, but if the head is shifted “scope shadow” will be seen. If the shooter is closer than proper eye relief the scope shadow will not be seen with head shift and can be a cause of errant shots. I prefer to back my eye just past proper eye relief so that the edges of scope shadow can be seen just inside the hard ring of the image- this allows me to ensure that I am perfectly centered in the optic as I will see any minor shift in scope shadow. There are a lot of people that group poorly with magnified optics simply because they are too close to the occular lens and therefore fail to place their eye in the same place consistently. At close range (0 to 25 yards) perfect eye relief is not critical, as the minor deviation will be irrelevant unless the need for high precision is present.
Sight Picture
Sight picture is simply applying sight alignment to the desired impact point or offest aiming point on the target. Perfect sight alignment is more important than perfect sight picture when it comes to precision work. A slight deviation from center of target with perfect sight alignment will result in the shots being only slightly off of the center, and the shooter should be aware of where the sights were when the shot broke, allowing the shooter to call the shot. However, any deviation of perfect sight alignment will result in much greater deviation in impact on the target. While this phenominon is greatly reduced with RDSs, for maximum precision the dot/reticle must be centered in the optic as when zeroed.
-Actually, sight alignment does not technically have to be with the front sight centered in the rear sight or with the dot in the center of the optic. What really must happen is to place the dot/front sight in the same place every time. It is simply much easier to consistently center the front sight/dot than to put it somewhere else.
-Vision correction is important. While you only really need to be able to focus on the tip of the front sight, you must be able to focus oni the fromt sight. If wearing glasses, ensure that you are looking through the exact same area on the lens for every shot.
Sight alignment and sight picture are conscious effort skills. To use an analogy- think of the sights as your steering wheel and the trigger as a gas pedal. You subconsciously press the gas in accordance with how fast you can control the car’s acceleration. You don’t think about how hard your foot presses the pedal, you are focused on keeping your car pointed in the right direction. Likewise, the foot does not immediately shove the pedal to the floor when acceleration is needed- it is a smooth increase in pressure, it is just a more rapid or slower press depending on the needed speed. The trigger is being pressed with subconscious trigger control as long as the sight picture is acceptable. If sight picture is not acceptable, the finger backs off pressure until it is good again and pressure resumes.
Breathing.
This is an important skill because the shooter is directly connected to the rifle at three points, one of which is the shoulder, and the upper body moves during the respiratory cycle (it is also affected by heart-beat, but we won’t worry too much about that right now). The effects of breathing will be amplified in braced or supported positions, and will be most dramatic from the prone position since the chest will be in direct contact with the ground. As I said earlier, consistency is the key. In the respiratory cycle it is difficult to consistently return to the same fullness of the lungs, be that fully filled, or half, or 3/4, or whatever other random fractions you want to apply. However it is fairly easy to find the natural respiratory pause (NRP), which is at the bottom of a normal breath cycle and lasts for about 6 to 8 seconds without adverse affect to the shooter. The shooter takes in a deep breath, holds it for a second or two, slowly releases it until the lungs are comfortably empty (if you try to fully empty the lungs you will feel a slight back-pressure trying to get air back into the lungs- this is too far), takes in another slow deep breath, exhales to the natural respiratory pause, and holds there. This is the most consistent part of the respiratory cycle in which to deliver a precision shot.
-When it comes to speed/CQB distances breathing is not as important as long as you are not taking the shots while in the process of inhaling or exhaling, and even that can be overlooked if at room distance.
Natural point of aim (NPA).
When in any position there will be a point at which the sights will want to sit. This point requires minimal muscle tension to maintain. The goal is to have the NPA on the center of the target.
To determine the NPA first assume your position. Acquire sight alignment. Close your eyes and take two deep breaths, stopping at the NRP. Open your shooting eye. Your sights should be on the exact point that you want your sights to sit. If they do not, shift the position until it is. Once you think you are good, check your NPA again. If shooting for precision, NPA is critical. Muscle tension is to be avoided as much as possible since muscles fatigue and constantly move, remember that consistency is key.
NPA is not really combat relevant, but the more you work at it, the more instinctive it will be to acquire by knowing exactly how to position your body relative to a target to achieve NPA (or close to it) without having to go through the whole process.
Without getting into positional issues, these are the key facets to precision rifle work. Working on these until they are subconscious and habitual will greatly improve marksmanship, but they are perishable skills and need to be honed whenever possible.
Moving onto speed work, there are some things that become more important than before.
Grip.
In fundamental precision work the most important thing about grip is that it supports smooth interface with the trigger and the support hand provide a place for the handguards to rest. When it comes to shooting fast the mount is very important, as it seals the stock to the shoulder (with help from stock weld) during multiple shot delivery. The firing hand exerts sufficient force rearward to seat the stock in the shoulder in a firing position without help from the support hand. The support hand assists in the mount by applying rearward pressure along the bore-line. A high grip on the HG using a vertical fore-grip does this much better than a low, full hand grip on the VFG. The firing hand should have a grip that supports rapidly sweeping the safety and accessing the magazine release button (righty) as well as placement of the index finger on the trigger.
Platform.
Commonly called stance, but I like to refer to the platform.
I consider the platform to be from the hips to the shoulders. In all reality when it comes to fighting with a rifle, the legs really don’t matter so long as they provide the needed support or mobility to the shooter- at least as far as the standing position is concerned. I prefer to have shooters initially start in a very squared-off position and allow them to naturally, gradually alter their shoulder angle instead of having them begin bladed. This is important to the bulk of my student body due to body-armor/plates. I personally have a slight blade, pretty much like Chris Costa. While I am not overly concerned about the amount of shoulder blade, there are advantages to a more squared-off position, such as transisitioning between widely spaced targets, plate protection, 360 degree mobility and seamless movement between mobility and low-profile positions. If I am running slick I will have a little bit more blade to the position since more of the ball of the shoulder will be available for use as a pocket for the stock.
The platform needs to be aggressive behind the gun, with the top of the stock firmly backed by body mass. Any air gap between the shoulder and the buttstock will permit movement of the gun to fill the void during recoil. While this will have zero affect on accuracy (you should be achieving at least flash sight picture at sight relevant distances) it will make the gun slower- remember, you can only shoot accurately as fast as you can track the sights. Many people that have problems with running the gun fast and hard are not backing the stock with sufficient shoulder.
The shoulders need to be rolled forward aggressively. This will do a few things for the shooter. It will give a consistent placement of the buttstock and provide pressure into the gun from the outside. It also helps with forward weight balance onto the balls of the feet. Just as with isoscoles pistol the weight balance forward on the balls of the feet will allow the shooter to fluidly bounce his heels alternately without discomfort or weight shift. Keep the elbows rolled down- this reduces target profile, reduces the possibility of smashing your elbow during movement, and slightly applies pressure to the gun, giving a little more stabilization during firing.
The abdomen should be slightly tightened, squeezing the upper body down. It usually doesn’t require explaination, but some shooters are not terribly athletic and the little hint can trip the little lightbulb.
When practicing, there are a few things you can do to work the position for maximum efficiency.
Learn to rapidly present. I use a shot timer set on random initiation. Begin at a low alert, weapon on safe. On buzz, simultaneously sweep the safety and present the gun, driving the sights to your line of sight and fire a single shot to an 8" paper plate. Your goal is to be able to break the shot with a guaranteed hit from 5 yards in .75 seconds or under consistently. Once you can do that, switch to a 3x5 index card at the same distance.
Learn to control the gun. 25 yards- begin with the gun up on target, safety off, finger on trigger. Work shooting 1 second intervals for 5 shots, as in, “One thousand BANG, one thousand BANG. . .” Then work on speeding that up by changing the tempo to about .5 second intervals “1 and 2 and 3 and 4 and 5”. Work on this until you can keep 2 strings of 5 in the paper plate. Move forward to the 10. Once again we will speed up to about .25 second intervals- “1.2.3.4.5.” Keep working it until you can track the sight bounce for each shot and keep them contained on the plate. Now speed up again, “12345”. The trigger finger is moving as fast as it can- and the eye is tracking all shots, able to call each shot. Once all shots can be contained, move up to the 5 and work the same cadence to the 3x5 card.
There are a lot of ways to work rifle training, this is simply a way that has worked well for me.