NOVESKE/ MAGPUL LIMITED EDITION MPL LIGHT RECCE

AR/M4 AR General Discussion
1

http://noveskerifleworks.com/cgi-bin/imcart/display.cgi?cat=77

Magpul and Noveske Rifleworks have teamed up to release a new AR15 variant. The above links should get you pictures, as well as info. This is a heavily loaded up package, and comes with everything shown in the picture. Check out the above links for more info.

Shown below is what the package comes with.

SPECS

16.1" Cold Hammer Forged Barrel, 1 in 7" twist, 5.56mm
–Made of Mil Spec M249 Machine Gun barrel steel, with heavy M249 Chrome Lining,
(appx. 2 times as thick as an M4 or M16)
–Extended Feed Ramps
–Mil Spec Phosphate finish
–MP HP tested
–Mid-Length gas system, no M203 notch
–Shot peened and MP tested bolt
–Properly staked carrier key
–Auto carrier
–H Buffer
–MAGPUL UBR buttstock
–MAGPUL MIAD grip
–Ambi magazine catch
–Ambi bolt release
–Forged Vltor MUR upper receiver featuring an anti-rotation interface with the handguard
–11" free floated handguard w/ 1913 rails
–Low-profile gas block pinned to barrel
–Flip-up front and rear sights
–AAC Blackout non-mount flash suppressor
–Four MAGPUL P-MAG 30rd mags included, black non-window
–V-TAC padded black sling
–QD Sling Swivels
–MAGPUL XTM rail panels, 5 packages
–Eagle LE Discreet Soft Case

2

In first!

That isn’t going to be cheap. Is it really going to be built on the Magpul lower?

3

MMmmmm…Magpul lower. So tempting.

4

Yes, this is where the Magpul lowers are hiding. No, its not going to be cheap.

5

Two great tastes that taste great together! :slight_smile:

Congrats to anyone with the cash to get one…

Derek

6

$3K for the package. Not cheap…but not as high as it would have been two months ago. :smiley: Now, if Magpul says “We weren’t making any more lowers” this may very well be worth it.

7

Too rich for my blood. I’ve already been stimulating this economy like a madman.

Sweet ass looking rifle for sure though!

8

Sexy. Daddy wants!

Currently 49 in stock, on Noveske’s website, at time of posting this.

Too bad my play money is tapped. :frowning:

9

Muy Bueno!

That’s sweet. Now if they can stay in stock until I get paid…

Is the lower stamped; made in Boulder, CO?

John

10

Never say never, but I wouldn’t count on more Magpul lowers any time in the foreseeable future.

11

Erie, CO is where the FFL is registered. That said, I’m typing this from a coffee shop on the Hill in Boulder. :smiley:

12

Hmmm…if I sell my Noveske 16.1 I could easily justify this…what should I do?

13

Do it, and don’t look back. :smiley:

14

OK this is just dead sexy. Wish I had a CC to splurge with. :smiley:

15

I swear you gotta be rich to play in this market anymore.

16

I’m with you, I can’t justify AR #10…especially a Safe Queen like this.

Remember that guy, a couple days ago, that started the “Best Looking AR Thread”,…put this on the top of his list!

17

These are part of the original test run of lowers we made.

They cost us too much to manufacture and there are only about 800 or so that will ever be made in this manner.

Our insurance company previously has not allowed us to sell firearms we manufacture on the open market but they gave a special wavier for these to be released.

18

It should easily win the award for “most photographed, never fired” rifle.

19

Interesting… that MAGPUL lower looks almost identical to the Gen III POF lower my NOVESKE upper is secured to.

20

Oi, i know this is going to come out the wrong way but…

H20, your POF is still an AR15. There’s only so much you can do to a lower to set it apart before you just start adding cosmetic additions, ie extra metal.

Correct me if im wrong but are you simply implying that perhaps these two lowers were made at the same factory?

In regards to the rifle…wow…thats an incredible package but too rich for my blood. For anyone that gets one of those, congrats and enjoy the hell out of it!