No Frills quality 20" A2

When I was a kid, pre AWB, my dad had a Colt Sporter (I think). I was a colt for sure, 20" with a fixed carry handle. To me, it was the Classic AR that reminded me of the M16’s that I had seen in movies. I was a young kid. If you were going to source parts to build this rifle for a decent price, what would buy?

Sent from my iPhone using Tapatalk

Fn 20" barrel would be the biggie for me

Sent from my SAMSUNG-SM-G891A using Tapatalk

Last year, I built an A2 using an A2 upper receiver that I got from a buddy of mine. It was free, so I could not complain. I bought a Windham Weaponry A2 Gov’t. Profile 20" Barrel Sub-Assembly (http://www.windhamweaponry.com/shopexd.asp?id=309#axzz3TB9cn1sr), which by the way, is an excellent barrel. They also have a complete barrel kit (http://www.windhamweaponry.com/shopexd.asp?id=318#axzz3loGYSOfD). I bought one of the PSA Stealth lower receivers (one of the very last ones) with no PSA logo rollmark. I sourced an A2 buttstock assembly from White Oak Armament and I bought a PSA Premium BCG and CH. It is a great shooting rifle. There are a few companies (Del-Ton for one) that has A2 upper receivers. I would also recommend the McKay Enterprises A2 lower receiver as it does not have any logo rollmark on it either. Of course, to each his own.

URL=http://s100.photobucket.com/user/jamesrea_2006/media/Weapons%202014/Retro%20ARs/M16A2/007_zps5kbevrwa.jpg.html]

Del-Ton’s complete A2 upper receiver is currently out of stock, but they do have a stripped A2 upper receiver in stock.
http://www.del-ton.com/AR_15_Uppers_A2_s/90.htm

Fulton Armory has a stripped A2 upper receiver in stock.
http://www.fulton-armory.com/upperreceivera2usgi.aspx

Rock River Arms has A2 upper receivers as well.
http://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_id=279

I have an old ArmaLite lower I was going to make into an A4, but there’s just something honest about a good ol’ A2.

I tried finding an A2 just like my old Bushmaster A2 HBAR over the past several months, but I finally gave up. Finding anything with a 20" barrel and A2 upper receiver w/fixed carry handle is quite a challenge these days. I understand the A3/A4 uppers are more practical, but some of us have enough tactical ARs as it is and want to take a trip down memory lane once in awhile.

Bushmaster, Del-Ton and Stag still show them on their websites I believe, but none are ever in stock anywhere I have looked. Except for maybe Bushmaster I believe they also have non-chromed lined barrels as well.

There appears, that over the past couple of years, more guys are getting back to basics with the AR platform. There is now more interest in the A1, C7, and A2 platforms. I see more and more guys building the older A2 ARs like the Model 727 carbine and the 20" A2 Government profile rifle. Still, the vast majority want a flat-top receiver. Some, like myself, are building ARs with flat-top receivers, but with detachable carrying handles and leaving them that way. The basic M4 and A4 are becoming very popular now. There are still A2 upper receivers available from Fulton Armory and Del-Ton. The ones most available are the stripped versions for around $99. I do not think that the market saw such a return interest in the A2 platform.

FOr me it always has a special place as the first weapon I ever shot or learned how to use. I thought it was so modern then got to my unit and the standard issue rifle was an M4 w/KAC RAS, PAQ-4C, (though like most Cherries, I was put on a SAW) and quickly forgot about the old A2. I’ve seen nothing but flat tops in my 11 years as a civilian.

Well, a couple weeks ago I fired a retro 20" A1 and my fully decked-out 6920 side by side, and honestly the old A1 was more fun to shoot. I see the benefits in optical sights, angled foregrips and the like but I didn’t shoot any worse going old-school with triangular handguards and iron sights.

In basic form the weapon system is so lightweight and handy I always have to have at least 1 minimalist/KISS rifle on hand.

This is basically what I want. A basic rifle that functions well. No optics, no attachments other than a sling.

Sent from my iPhone using Tapatalk

I’ve noticed the same trend towards longer rifles in basic configurations. Perhaps its a nostalgia thing, maybe folks are bored with collections of 16" and shorter, or maybe there is some actual needs assessment happening. Most folks aren’t rolling in for direct action missions, and are realizing rifles and gear set up for such things aren’t practical for their actual everyday uses.

In the spring last year, I put together an “A5” for use with iron sights. It quickly became my favorite rifle, even if slightly heavier than my others.

It has gained a free float rail and an optic since then, and it has become my “go to” for just about everything.

I liked the original configuration so much that I’ve been putting together a pure iron sight KISS rifle. I’ve been planning on a slick side flat top, but part of me is really tempted to go with a NoDak Spud slick side A1 upper. This is the Gunstruction mock up.

There really is something immensely satisfying about the longer ARs for me.

Well let’s face it… 20" is the most reliable and durable configuration anyway, as there’s less worry about being over/under gassed. A 16" carbine is great for home defense and CQB, but free of any constricting environments a 20" rifle has the advantage.

I need a 20" in my life again, this thread did it. Haven’t had one in a while because I always think “if I want range I’ll just go 20” .308".

My next AR will be an A2. I have a carbine and a 20" A4 now, but I carried the A2 in the USMC. Definitely nostalgic for me, plus there is nothing wrong with an A2 with those good iron sights if you know how to use them. Plus, I prefer the bigger carrying handle hole on the A2. The A4 detachable carrying handle is just too constricted to be comfortable to actually stick your hand into comfortably. I follow every thread on A2s that I can find on here. Haha.

I’ve always wondered how many people actually carry an AR that way. I’ve seen pictures of soldiers in Vietnam who did it, but I always though as light as the rifle is why not simply hold it by the pistol grip? I guess the military thought the same thing, because like you said the A4 carry handle opening is so narrow that it’s not practical to hold that way.

We would get punished for carrying it that way or using the sling.

I’ve seen people say good things about the Windham Weaponry barrels as well and they have the non f fsb. That with an a2 upper receiver and you should be good. If I was doing this again I’d look at this option if it was in stock(I don’t think it was at the time) What sucks is that american spirt used to have a2 upper receivers with m4 feed ramps but no longer does. I used one for a 16 inch middy a2 build. Colt did as well but I haven’t seen them in stock in a while and last time I asked Grant he said he couldn’t get them.

For my 20 inch a2 I went with an ar15sport upper. On here people some people said they were good. It does have a m4 feedramp barrel in a standard upper but it isn’t like that will not work, just not ideal. I got the 1/8 twist version as the 1/7 was out of stock.

Stake marks looked fine on the bcg. Don’t believe the bolt was hp/mp marked but I’d have to pull the gun out of the safe. It is a range toy so I wasn’t as worried about it. If I want to use a 20 inch ar to rely on I’ll grab one of my bcm ones. Still the ar15sport upper looks assembled well and was was pretty much dead on out of the box. Haven’t had that much time to shoot it but so far so good. Also I asked them to swap the crush washer with a peel washer so I could run my halo or future m4sd2(should be any day now) on it. They did which is always a nice touch(bcm will do this as well).

Might want to just check and see who gets their parts back in stock first.

Lately, I decided to do a 20" of a different flavor. It is an A4, not an A2. I does use a Windham Weaponry upper assembly (the second one I have used for a build in addition to a 20" barrel assembly for my A2 build).

I’ve got a C7 upper and several A1 parts floating around. My dad’s SP1 lit a fire.

A wood-stocked AR like that looks both awesome and wrong at the same time. :eek: