I’m in need of a couple measurements…anybody that can provide them, post them up.
I know there were older ASR muzzle devices that don’t work with the Omega/Harvester BB/Saker adapters.
I need:
Thanks in advance.
It took more than a few minutes to find it, but I think this is some of the info you seek.
https://www.m4carbine.net/showthread.php?163792-New-SilencerCo-Omega-Suppressor/page7
Look at Post #250
Thanks!
So is the new one 2.75"? Thus just a .12" difference?
Or is the new one shorter than that?
ETA: link to post #250
Got what I need now. Thanks.
What other info did you get, for future reference? I am planning a trip to Austin soon, to pick up my Omega, otherwise I won’t have it for a couple months. I have about 5 muzzle devices that I need to check for compatibility with the Omega.
2.87" for old ones. 2.46" for new ones. ~1.60" from opening to blast baffle cone, and ~2.17" from opening to flat portion of blast baffle. (Assuming no adapter installed in tube)
I have a guy making me an adapter to use an Omega on YHM mounts. And also a 1/2-28 direct thread adapter. Both in Ti.
I had a sneaking suspicion that you were up to something along those lines. I look forward to seeing your final product.
Looks like you already have what you need, but just thought I’d chime in. Just got my new Omega/Specwar Trifecta flash hider yesterday… Length from the base to the tip of the shortest prong is 2 3/8". Length from the base to the longest prong is 2 15/32".
Alright, for anybody interested, here’s the first look. Parts came yesterday, and I hope to test fit them in an Omega tomorrow…so more pics coming soon. I’ll add some specs after the pics. Goal was to add another can I could swap around on my YHM-equipped hosts. Currently have a couple YHM cans, a couple Sakers with Y-Mounts, and multiple F1 cans with YHM adapters made by the same source.
Here was the first one (not shipped to me), made before I provided DM with the blast chamber length. All he had was the longer version of the YHM FH, so that’s what’s in the pic with the Omega ASR mount and brake:
And then here’s what I got. Longer version to handle 7.62 devices, shorter version for 5.56 and LT versions, and a direct thread:
Another one with the Omega ASR mount included:
And finally one with ASR mount/brake vs YHM mount/LT FH:
Now some specs. All of the pieces I got are Ti, so SS would be a little heavier but less expensive. Don’t have cost, yet…but can’t imagine it’s much different than the other adapters he’s made.
Weights:
Long YHM adapter: 2.9oz
Short YHM adapter: 1.9oz
1/2-28 DT adapter: 1.5oz
ASR adapter: 3.5oz
Short YHM & LT FH: 5.6oz
ASR & brake: 7.1oz
All the threads (SiCo and DM) are roughly .375".
Total length and outside the tube length (should be roughly .375" different, but I only measured once so could be off by a couple thousandths):
Long YHM: 1.537"/1.158"
Short YHM: 1.034"/.660"
1/2-28 DT: .570"/.193"
ASR : 1.204"/.830"
Blast chamber measurement provided was ~1.70". The ASR/brake combo and the YHM/FH combo are within .003" of each other from the shoulder to the tip (the portion inside the can). I believe the longer YHM mounts are ~.5" longer than the LT/5.56, and the longer adapter is basically that much longer than the shorter one.
Bottom line to me…I can mount an Omega on my YHM mounts with an adapter that’s ~1.5oz lighter and ~.17" shorter. Considering I plan on selling the ASR mount, the 7.62 ASR brake, and whatever muzzle device I choose when I register, it’s a no-brainer.
Thoughts? More pics to come once I get my hands on an Omega this weekend.
Got some pics of adapters attached to Omega, and Omega mounted on AR.
It looks like you have a good machinist. Thanks for sharing the product.
Just curious since the Omega comes with one, is weight the reason for making the direct thread adapter?
Comes with a 5/8-24. SiCo sells other thread pitches for $126, and even SS has them listed for $100. I’m hoping to pay about half that price. The weight reduction isn’t really even a consideration. Only reason I’m even getting one is try it on my PS90 SBR. 5.56 flat cap, 1/2-28 direct thread, should be short and light. (Everything else has a YHM FH)
I could also use it if I ever needed to let somebody try it out that didn’t have a muzzle device.
Very cool. I love seeing stuff like this. I wonder if I can convince my business partner to spare machine time for a direct thread mount for my Saker. 
Makes perfect sense. I must have missed the thread pitch on your new adapter. Very cool.
As info…if anybody needs the Omega/YHM adapter, I got prices back from the machinist.
As for pricing the direct thread and YHM short will be the same as all other adapters TI $65 and SS $45. The long version will be TI $70 and SS $50.
Prices including shipping.
I guess those come unfinished? I can’t remember what you did to your suppressors. Do you plan on finishing these that same as your suppressors?
Yep, unfinished. I did a DIY job with the C-Series Cerakote (air dry, 2000F rated). I may leave these raw, may hit them with the can of high temp grill paint I have in the garage.
Did you have chris at DM make the YHM adapter for the Omega? Looking at adding another suppressor and that would make an Omega almost a no-brainer for me.
Yep. He made the 1/2-28 and the YHM. He has designs to fit the long and short YHM mounts (and obviously the long works on both).
He may have updated the design by now, as somebody was getting him to make the OD to step back up to match the Omega…or at least was trying to. Never saw an update.