My New DD MK18

Hey everyone,

As the title suggests I am awaiting SBR paperwork for my new DD MK18. I purchased it as a pistol originally (pistol buffer tube) and will put a stock on it when I get the tax stamp. My question is that I have heard that I need to switch out the buffer tube (obviously) as well as some other parts in order to make it perform optimally as an SBR. What parts would you recommend and where can I find them?

Thanks!

Vltor A5 tube & buffer, Sprinco Green Rifle spring and your stock of choice.

An adjustable gas block on any current commercial MK18 is a must. Agree with post above on the A5 , green, and A5H2 with a SLR gas block. Stock of choice and feed that thing some good ammo. But seriously on the SLR. Those barrels are so overgassed it’s crazy.

If you want it to be a military clone, Colt receiver extension and any other parts you need. If not, A5 like mentioned above. My 10.3" has a .073" gas port and I use an A5H4 with it. I believe DD’s gas ports are .083" or .086" so you will have no problem using an A5H4 or H3 if you go with s mil spec carbine receiver extension. If you put an adjustable gas block on, you can use any buffer weight you’d like.

I have a DD MK18 upper on my registered receiver colt lower. It does have a syrac adjustable gas block installed, but I have run standard DD uppers (including unmodified MK18s) on it and I haven’t noticed that they’re tremendously overgassed. Now, if you suppress it, that’s another ballgame. But I wouldn’t worry too much about the gas otherwise.

Regarding the buffer tube, spring, etc. I run a standard buffer tube and spring with an H2 buffer. The gun runs flawlessly, and it doesn’t have any problems with any of the other uppers either. I did have people recommend the A5 system, but honestly, I’ve seen almost no need for it in practical application. And, I run the gun hard. Full-auto has a way of exposing issues fairly-quickly…I don’t see many issues with the DD MK18 system, certainly none that can’t be corrected fairly easily.

I’ve been looking around for an adjustable gas block for my factory MK18 (runs great without a can, overgassed as all hell with a 556-RC2). I see others have recommended the Syrac as well as the SLR, and I’ve also looked into the Govnah but they’ve been out of stock all year. The main things I’ve been considering are durability/reliability, ease of adjustment between 2 preset settings, and ease of maintenance. Which one do you guys recommend and why do you recommend it?

Superlative Arms bleed off gas block looks like it performs really well and is getting great reviews. Would look into it along with the others you mentioned.

The Govnah is by far the best I’ve ever seen. I hung out with the designer for a bit one afternoon and I learned all about the product. I had already been given a Syrac, so I installed that. I intend to swap it for a Govnah one of these days

So I got an email from MicroMOA earlier today. The standard MK18 Govnah is back in stock, but the one for with the cutouts for use with a RISII or Geissele MK8 is still listed as out of stock. They also updated the website to say “No ETA” on the RISII/MK8 cutouts version. My question to you all is if anyone is running the MK18 Govnah without the cutouts with a RISII or a MK8 and if it fits alright. I’ve read mixed reviews online and even MicroMOA’s site seems to have some mixed reviews like it will fit on some RISII/MK8 builds and won’t fit on others.

If the version without the RISII/MK8 cutouts will not work then do you think I should wait for a gas block that has “No ETA” or settle for one of the other ones mentioned and be shooting by Thanksgiving? Currently my MK18 is virtually unshootable with a 556RC2. Way too much gas to not tear up and get choked out and it’s already taking chunks out of the brass deflector as it sends the brass flying at about the 1 o’clock.

I have the non MK18 version of the GOVNAH because I didn’t pay attention to the fitment issues. I had to take a dremel to the inside of the rail and shave a bit off to fit… Took about 60 seconds and some birchwood casey perma blue on the sanded area. It works great and I run it suppressed flawlessly on the .052 port with a Blue Springco and an H2 100% of the time. I have the “extra gas” plate (073/.052/.082)

This is the only adjustable gas block I have ever used so I don’t have much to compare it to but its an awesome product.

You can always go Springco Blue and an H2 or H3 if you cant wait for the GOVNAH to be back in stock.

Considering how popular the SLR adj block is that may be worth a look too.

I have a 10.5" with an A5(H2) and an SLR, and I found a setting where it’ll lock back off the shoulder and eject to 4:00 unsuppressed and eject to 2:30 with an RC2 mounted with no notable gas to face and shoots smooth. At most, a couple clicks, probably one, would have you in the sweet spot in each mode. I just leave it. I’m sure a big ammo change could necessitate an adjustment though.