The stock is made by Accurate Armory in Lexington, KY. They make and sell just about every part of the rifle and offer several complete rifles. I plan on swapping out my lower with one of theirs. Nothing wrong with the one I have, but theirs are of a higher quality IMO, and I like the idea of having Lexington, KY on the side of my lower…lol.
The stock comes of course in commercial and milspec and I think is available in three colors. Its almost like a hybrid Magpul/SOPMOD in its design. Very comfortable, plenty of cheek weld and is tight to the buffer tube. It runs about $90 I think, which is a hell of a price for a quality piece. The guys over at Accurate Armory are working on getting their online site/store up, but you can find the stock under tactical intent.
Lol…it will get there eventually, but so far it shoots great…even with cheap Wolf ammo
The 1911 will be getting it’s own thread in the proper section eventually. It started life as a plain RIA 1911-A1 Government 5". I added a pair of Ed Brown Cocobolo checkered grips, an arched mainspring housing and different sights, which are about to be swapped out for a set of Novaks. All the stainless parts came from a friend’s kimber that he is going full custom on. Then I added a Wilson Combat stainless mag well.
I have a new lower on the way for this. Getting an Accurate Armory lower (made just an hour away in Lexington) into which will go an MOE LPK from Palmetto State Armory. I’ll swap over the buffer tube/stock and BAD lever. This lower will then be set aside for now. I’ll either sell it or start another build eventually depending on money.
Little update. Changed out my Sharps lower for a local one from Accurate Armory and got an LPK from them. The fit with the upper is MUCH tighter with basically no slop or wobble. The trigger feels more crisp as well and it seems to have a more positive reset.
The build sheet as of now:
Accurate Armory Lower
Accurate Armory LPK
BCM Upper
BCM BCG
BCM Gunfighter Charging Handle
Magpul MOE Grip
Magpul MOE Trigger Guard
Magpul AFG
Magpul B.A.D. Lever
Magpul MBUIS
Magpul PMAGs
VLTOR End Plate
VLTOR Low Pro Gas Block
DPMS Buffer Tube/Spring
Tactical Intent TI-7 Stock
Zombie Hunter Dust Cover
DEZ Eliminator Fluted HBAR Barrel
Vortex Flash Hider
Troy TRX Extreme Battle Rail
Elzetta ZORM Light Mount
Solarforce L2 Light
Blackhawk Single Point Sling
Palmetto State H2 Buffer
Eotech 512
I also have a Noveske TRX QD adapter plate on the way and will be switching to a 2 point sling and as soon as I get my taxes, the china made light will be swapped out for an Elzetta made here in KY.
