I’m wondering if anyone has experience mounting a serpa qd to a shelf or any other furniture. I’m wanting to mount the QD under a shelf in the closet, and was just going to order the QD and wing it as best I could. Trick is the shelf is not wood, its the generic white wire closet shelf…see below
Then I thought to ask if anyone here has done something similar and could offer suggestions. Pics would be awesome as well.
I mounted one in my car, but not on furniture or in a closet like you’re wanting to do. I just used self tapping screws and put the qd mount on the passenger side of the center console.
Take a small sheet of metal and use it as you would the block, but wrap the ends over the wire of the shelf to allow for easier use of the one section of shelving.
I’m gonna call this plan A. My concern with zip ties, is if its loose and wiggles it may be hard to get a hold of in the dark. If its solid in place, I can index off the door jam and know wear it will be.
Although the zip ties are plan B (and I’ll just yank those b#@$%@ tight)
I’ll post some pics whenever I get it done. I’m guessing the over under on profanity before switching to plan B is 9.5
I’d try it with zip ties first, easiest way to get it set up and can be easily adjusted or moved. And one tip; don’t use cheap zip ties (the bag of a 1000 for $10), I would recommend the zip ties that have a metal clip that bites into the strap, usually they are a better quality and tighten better.