Hey y’all,
I have the possibility to grab a new Springer MC Operator for a steal. I have a few questions hopefully someone could quickly answer:
I also read things on the MEU(SOC) pistol program. Is it true this gun was used or at least parts of it? Out of pure curiosity.
Any help appreciated.
No Springfield has a FPS
Standard guide rod
If you’ve shot the piece enough to be comfortable with the magazines and ammunition that you’re going to carry, then yes.
Yes, standard 1911 grip.
Thanks man. for “No Springfield has a FPS”. Are you saying No springfield gun in general has a FPS or no, it does have a FPS? Sorry if I’m misunderstanding… damn internet!
Springfield Armory Inc has never put a firing pin safety in their 1911’s.
Several in service at work doing fine with Speer 230 gr GDs with Wilson ETMs, 47Ds and CMC mags.
thanks guys. What’s this gun have to do with MEUSOC? A friend was telling me something that it is related? or is it that Springer slides were issued?
The Springfield Armory MC Operator is one of the two entrants for the Marine Corps MARSOC M45 contract. Here’s a Marine Corps Times article about it, and here’s a related thread.
Interesting. I see that the one entered in the MARSOC shoot out was the px9105ml. The MC operator sold nowadays is the px9105mlp. Anyone know the difference with the added “p” at the end of the mfg number?
The ‘P’ just refers to the commercial Springfield Armory ‘package’ which includes a holster, magazine carrier, case, etc.
Springfield Armory has supplied 1911 parts and (apparently) complete pistols to the Marine Corps for the MEUSOC pistol (which is a different animal than the MARSOC contract).
Quit typing on the Internet and buy the darn thing. You won’t regret it.
Most have been happy with their’s, I am not. My operator is at the factory for the third time for the same extraction issues and I have read that it isn’t rare for them to have bad extractors right out of the gate. As with any gun make sure you fully test it before trusting your life to it. Mine went around 400 rounds before it started to malfunction. The last spent casting would get caught in the feedlips of the mag and jam up the gun something fierce. Improper extractor tension I’m told. I sent it in, they adjusted the extractor and it came back and went another 400 or so and started malfunctioning again. This last time it went 100 before the problems started. Now their customer service is great, they are quick and cooperative and they pay shipping both ways. I believe that they are making an honest effort to make it right, but I made it clear to them that if I get back a broken gun again they can count on me never buying another product made by their company. Most guys would probably just throw in a new extractor and be done with it but this is their mistake and they should fix it. Plus I’m not confident in my abilities to do it myself and the only gunsmith in my area is a fucktard and I should have kicked his ass for how he butchered the frame of my ORM colt 1991a1.
Aside from that the gun has been accurate and has never had a feeding issue and I’ve never encountered anyone who was anywhere near as displeased with them as I am. You will probably have better luck than I did.
Buy a Wilson extractor and have them install it…it will maintain tension better as it’s not MIM.
if it comes to that I’ll twist their arm for a trigger job and a left-side only safety
Agreed. A Wilson extractor and an EGW fps will set you straight. Worked wonders for mine. Same symptoms as yours: last round wedged into magazine feedlips by the slide. The issue: extractor clocking.
Good to know. Looks like I inadvertently started some thread drift though. :suicide:
Just as an FYI, MEU SOCs don’t exist any more. They went away in 07 and a MEU only gets the SOC designation when it has an embarked Marine Special Operations Company.
Even with the return of a Maritime Special Purpose Force-light in 09, the MEUs are not SOCs any more.
I think everyone is just accustomed to referring to the USMC 1911s that remain in service as the MEU(SOC) pistols as that is the designation they carried for years. Here’s an older Marine Corps manual for the design which refers to the pistol as “Pistol, Caliber .45, MEU(SOC)”.
There is currently a M45 pistol competition (in which Springfield Armory has entered the MC Operator) that appears destined for the MARSOC community, and it clearly differs from the older MEU(SOC) models (which vary greatly themselves) in including a requirement for an integral accessory rail. However, it appears some older pistols already in service are now being referred to as the M45, which confuses the matter further (the solicitation itself states “The Marine Corps Systems Command (MCSC) is seeking sources to replenish stocks and meet increased demand for its M45 MEUSOC pistol.”)
One of the more interesting things about 1911s in USMC service is the sheer variety - besides the various reworked USGI 1911s, there are some Springfield Armory Professionals (PC9111MC), as well as some newer USMC marked Springfield Armory variants - not to mention the small procurement of Kimber pistols as the Interim Close Quarters Battle Pistol (ICQB) for the short lived USMC SOCOM Detachment One.
Considering that these appear to be the last 1911s in military service after over a century of use, I find the USMC 1911s very interesting.