Looking hard at a OBR

So I have been looking at getting a SR25 or OBR, after basicly throwing a dart at the two, the OBR won out, my question now is 18" or 20" what are the pros and cons of each? I’m personally leaning 20", but than again I know nothing about how the 18" works.

18" probably will not have enough power to get you to 1000 yards if that matters. Otherwise, better in every way.

Can you elaborate?

Gas guns give up a little velocity to bolt guns because they tap off a little of the gases that propel the bullet to operate the weapon. My brother teaches a long range shooting course and the 18" gas guns starting going subsonic around 800 yards with a complete loss of predictability and reliability compared to when the round is supersonic.

The 18" gun will be lighter, handier, and more practical for everything you want to do with it. If you must ring steel at 1k, buy a $700 Remington 700.

Got it, I know on a rifle acion in 5.56 you loose less than 10 fps, but I dont know the loss of 2" in a 308.

Guys who are pushing the 308 out to 1K are generally doing this with bolt guns and handloads that are pushing the limits of COAL to squeeze every bit velocity. Most autoloaders are going to have more limitations when it comes to COAL that limits performance to around 800 yards.

So then going from 20" to 18" isnt going to make any difference than?

Again, so long as you’re not trying to get past 800, no difference.

There will be no significant difference between 18 and 20 inch. KevinB has some posted sub MOA groups created by a 16" SR25EMC at 800 yards. Keep in mind that the 168 gr OTM will not do well beyond 700-800 yards due to trans-sonic stability issues. Stick with 175 grain or some bullet other than 168 OTM.

Also, the OBR is a great choice.

I pretty much only use 175 gr home rolled, in my bolt gun. I have been shooting AR’s for quite some time, but never a gas gun for long range, heck its time to jump in. I know the difference from a 20" AR to a 18" AR using a rifle action gas system is less than 10 fps, so I was curious what the 308’s difference was. The thing I like about a 18" its quicker, and much handier.

Knights has stated the difference in velocity between 20" and 16" was less than 100FPS.

Im no expert at this but I think you really only see good 308 velocities once you get up into the 24-26" barrel length ranges. If you are looking at 18" vs. 20" its splitting hairs performance wise but I would say the 18" is 2" less than the 20" which gives you a greater handiness than you lose from the 2" velocity wise.

Ive found my EMC to be very effective at 750. Ive only shot it to 1k a few times but out to 750 its very accurate. I wouldn’t worry so much about barrel length but ensuring the gun has the accuracy & reliability, your optic meets your needs, and the ammo you are using is good for those ranges.

For 1k/(+) I would be shooting a bolt gun in either a high BC caliber and/or a magnum like 300WM/6.5/338.

I am lucky enough my regular range is 1k yards, and the magnum bolt guns rule the roost at 1k. At 750 I am able to engage targets just as accurately and much quicker than the bolt gun guys.

Now to add more into the fray, a buddy of mine just got a LMT 308 in 16" SS, he said they can be had in 18" and 20" but were out of 18’s. He said he went that way as they won the British sniper trials, and included BUIS, sling, better manual and the ability to change barrels easy, all for less than the OBR.

The 18" 7.62 OBR will get to 1000 no problem.

I did it 4x in a row at the 2010 Larue Range Day (because my spotter was kickass).

We saw 18" DPMS SASS rifles not get to 1k at 4800’ at my brother’s class in Wyoming. I believe they were running FGMM.

For what it’s worth, my 16in OBR with M118LR @ 2460FPS made consecutive hits @ 960yards. I’m sure 1000yards is doable.

Here’s an AAR I did up on the Precision Rifle Class where I took my 960yard hits:

https://www.m4carbine.net/showthread.php?t=72150

You don’t get out much do you? :smiley: Just kidding, the LMT has been discussed ad nauseum for months and months in the Beyond 556 forum. Plenty to read if you are so inclined.

I have read there, problem is what I feel I’m looking for is right here in precision semis, forum what I saw there was how “how about”, “my” “whats the”, I have narrowed it down to either the LMT or OBR, 18" barrel, now its really what are the pros and cons of those two rifles? I was hoping real accuracy shooters who own either of these two would chime in, and share their thoughts, observations, etc
ETA, Allot of the LMT discussions are with the chrome lined 16". barrel, I’m looking for more a target, vs MBR

I would get the OBR.

Me too. One of the best places for researching this is snipershide.com/forum

I love mine, hence why I’m consolidating down my .308s lately.