Looking for step by step manual

I’m looking for the BEST/Complete step by step manual I can find. I have a Spikes Tactical lower that I need to install their enhaced lower parts kit.

I am so sick of all these yahoos, cowboys that all know how to install this stuff and not one of them know their *** from a hole in the ground. I’m going to learn how to do this right and these so called experts can go pound sand.

Where do I find a book/video/dvd to teach me?
Yes I can read and follow directions!

Thanks

TOS (AR15.com) has a thread with pictures and instructions on how to install a LPK in a lower… There are many videos on YouTube.

It’s not that difficult…

This is what I used for my first two builds.

http://www.ar15.com/forums/t_3_4/226782_Assemble_your_own_LOWER__UPPER__FREE_FLOAT__TRIGGER__GAS_BLOCK___Step_by_step_instructions_.html

MAINTENANCE INSTRUCTIONS
C7 FAMILY OF COMBAT WEAPONS

http://www.coltcanada.com/techpubs.htm

I used these videos from Brownell’s site when I built mine. I thought they were pretty straightforward. Link:http://www.brownells.com/.aspx/lid=11004/GunTechdetail/How-to-Build-An-AR-15-Video
Hope this helps.
lowdowndad

Good call! I forgot about the videos at Brownells.

If you can’t figure out how to install a LPK from these sources, then it would be wise to have someone else do it for you. Should you decide to take on the task; be patient, use tape on exposed surfaces, and use the proper tools.

When installing roll pins what I do is; start the roll pin, then I insert a punch through the other side until it touches the roll pin, this keeps everything lined up as you tap the roll pin through. I also use a little oil on the roll pin to help it glide into place. Get a good set of roll pin punches and a small brass hammer; you may want to buy a roll pin starter punch.

LPK installation is fairly easy…after the first time anyhow.

I also like the Brownells videos. Print out their PDFs if you want a good booklet. They do push their own tools (which are good) but if you only plan to do one you can make do with common tools in the garage to build up a lower.

A member here, Surf, has a great video series on youtube:
http://www.youtube.com/user/ssdsurf?feature=g-user-u#p/u/91/CAQKaDb80H4

Here is the write up I did for installing a Geisselle trigger. The stock trigger installs the same way. This is for the trigger only, but I hope it helps
http://m4carbine.net/showthread.php?t=72111