I received my KAC T1 mount and noticed after I torqued the lower 4 screws to 10 inch lbs. using both spacers the spacers would crush. The spacer on the bottom crushes down into the lever spring lock area and jams the lever either open or closed. The lever is not free to move without being pushed open or closed and will not spring back to the closed position. If I back the torque off to 8 inch lbs. the lever is back to normal.
I Also noticed that the Aimpoints position seems to ride slightly with the front of the optic tilted up? As if the spacers are being crushed to much by the 2 screws at the rear.
Is this normal for the KAC mount/spacers? Or do I have a problem?