Just picked up my S&W MP, need suggestions.

Ok, I just picked up my first AR, the S&W M&P OR
http://www.smith-wesson.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&catalogId=11101&langId=-1&productId=68442&tabselected=tech&isFirearm=Y&parent_category_rn=33803

What mods would you suggest I do, I really want a vertical grip, and light on it.
I think half the fun will be making mods to it.

I do love its clean look, but want to make improvements where I can.

Thanks

Congrats on the M&P15!

As far as mods, I would recommend going out and shooting it a bit before you go adding stuff to it. What is your M&P15 going to be used for? If it is just going to be for range fun, I would forego the light and spend that money on ammo or a carbine course. However, if it may see HD use, then yes, a light is a must. I would recommend an optic. No need to go top shelf… an Aimpoint CompC3 or Micro H-1 should serve you just fine. Oh, and the mandatory Magpul PMags.

I am not going to lie, I am new to ARs. I spent a lot of money on “mods” that really didn’t do anything as far as the functionality. I wasted money on having the next best thing when it really didn’t serve a purpose. My mods didn’t make me a better shooter, they only gave me a false sense of security and made my AR look “tacticool.” That money would have been better spent on more ammo and a course or two.

Grab an optic (I like the Aimpoint H1 Micro) and go shoot it.

Being the OR model it has no sights of any kind. You need sights or an optic before you need a VG or light.

I put a red dot scope on it so I can play, only spent a hundred bucks, because I wanted to get some advice on good optics/sights to use.

No way could I have left with out some sort of scope. :smiley:

Thanks guys, will look into those optics.

What do you intend using the rifle for?

Honestly, I learned the hard way doing MODs right away. If I were you I would shoot it quite a bit to learn the platform and then decide what things you think are necessary or would help your shooting.

It can be very expensive changing things all the time, and more importantly, it takes time away that you could be using to build better skill sets or get some training. Just my .02 from my experiences so far.

EDIT TO ADD: I noticed its the OR version, then I would suggest getting a set of irons to learn on first. Once again, just my .02
-B:D

Just got mine a month ago and learned the hard way that if you’re going add BUIS (iron sights) you will need a front sight intended for rail height as the gas block is higher than normal. Great weapon, my son just ran a couple thousand rounds through it last weekend at his LEO qualifying and said it performed flawlessly.

HD, and range gun.

I bought a m&p15 about 5 months ago and like mine alot, PMAGS and ammo always helps.

I agree with the edit…Gotta have BUIS (back up iron sights) as they are a fail safe backup option…

Add an H or H2 buffer to the gun (as it is over gased).

The light will be somewhat of a PITA to mount unless you add a rail to it. Normally I would advise you to add a rail to the FSB, but do you not have one.

C4

Would you also recommend the “H” buffer for a M&P15X?
Thanks.

All S&W AR’s.

C4

If one learns to shoot well with iron sights, shooting with a optical system is a snap. The same cannot be said of the opposite. Spend a while shooting the crap out the iron sights before getting the obligatory Aimpoint/EOtech/ACOG etc.

If you want a white-light system, I think the surefire scout light is hard to beat. Lightweight, powerful and rugged.

Ive got a M&P A model, SN 619xx and was seriously consider an H2 buffer. My only concern is that it might not cycle the lighter loads. What say you?? Should I pull the trigger on one and expect it to work, or should I be prepared to have to switch to an H buffer.

Magpul handguards and a rail piece

That will work for a light, but not a VG. We have seen too many plastic HG’s break under the force of a VG pulling and pushing.

C4

No fear with the H2 buffer, but if you think that it will not work, then go with an H buffer.

C4

Alright, thanks. :cool: