To clarify, this carbine will probably never wear a magnified optic or be shot for tight groups. It will mainly be used for HD and possibly close-range hunting.
I think that’s a good question. Is there a recommended cleaning regimen for guns that DO wear magnified optics versus close range use weapons?
Sent from my iPhone using Tapatalk
You could even leave out the CLP. Use this method until you notice your groups open up. Once that happens, do a thorough cleaning and start over.
I am not a metallurgist. I am also generally known for not giving as many ****s as normal folks. I can’t tell you anything definitive but my experience. I have used a bore snake (the same one!) and CLP (in the last year I switched to a non toxic product) to clean every non-precision M16A4/M4/AR15 I have shot or owned for almost a decade. I will use a copper remover, literally, no less than every 5,000 rounds and notice no ill effects.
Alternatively you could stay on top of it so that once-in-a-thousand round cleanup doesn’t take all day! I’m one of those OC types when it comes to cleaning muh gunz.
I don’t use a Bore Snake on my AR’s anymore, used to, but not now. I did see accuracy degrade on my 2 most used AR’s over time. I also don’t think the BS does a good job of chamber cleaning, especially the leade. I’ve had junk stuck in the leade and had malfunctions because of it. So I use a wetted brush on the chamber/leade every cleaning. I use a bore brush now, but I don’t go crazy with it, and not every time I clean. I do use a Snake on my pistols, for this it works well. If I needed a quickie bore clean I would use a Snake with some Hoppes on it.
I use a bore snake and CLP of some sort immediately after I am done with the rifle and the barrel is still warm. I dose the bore snake liberally with CLP and pull it through a few times, and it seems to do a nice job of removing a good deal of the carbon out of the barrel. Sometimes I do a more thorough cleaning when I get home sometimes not. Either way it’s not a bad practice to run the Bore Snake and some CLP right after a range session. As long as you are not cleaning improperly using steel brushes or really bad cleaning techniques I don’t think you’ll damage a barrel by doing regular light cleaning right after a range session. This is also cheap insurance against bore corrosion if you put the rifle away and forget all about it for a long time, at least you will have gotten the fluffy moisture attracting fouling out, and left some oil in the bore.
All I ever use is a bore snake & MPro7.
God damnit. Someone please just either tell me it’s fine or shoot me a link for yet another thing I need to buy.
First - Relax
Second - The people telling you that that’s what they use ARE telling you it’s ok. You’re gonna get 100’s of differing opinions here on how to clean your gun.
You’re fine using just a snake & CLP. Occasionally, you may decide you need a more thorough cleaning.
That’s not how the internet works lol
I second bore snake and not getting crazy with solvents.
I’m past rodding my guns. I am no expert but I’ve been told a lot of “cleaning” is actually busiwork to keep idle hands occupied. You can over do it and jack up a barrel.
Otis or a snake. Jamming a brass rod down a small rifled tube over and over like a butter churn won’t help accuracy.
I use shooters choice here and there.
FWIW Kyle Defoor has a video on youtube and his routine keeps it simple and is pretty much bore snake.
I used to keep GI kits but fudge that. Get boresnake or OTIS, keep em in your kit bag, enjoy life
It’s that new millennial entitlement crowd. They demand to be spoon fed.
We’re not all like that!
Are you retarded? I am a someone. And I told you it’s fine. Nongshim is a BTDT someone, and he did too.
Quit being ****ing stupid.
I clean the barrel on my ARs, baring the use of junk or really shitty ammo about every 500 to 1K rounds, with the average being towards 1K. Haven’t had an issue. Keep it lubed. I have one that I am think it over 2k without a barrel or really any cleaning, and it still going, though groups were kind of meh last time I was at the range, but that could have been me too, it a beater anyhow, and well, it about 4th in line should the zombies rise, so…
OH, and it not even a chrome lined mofo so hell.
Make sure you have a good chamber brush or two. Cleaning the chamber and BE lugs helps a lot and takes little time. Make sure required lube points are hit. I don’t use a snake usually, but that’s mostly for my use. Do not forget the areas where the TM notes it.
In use, this can be a 10-15 minute job, not a detail cleaning, but it can get you up and running that’s good for most for use.
Well, that’s what happens when 70s burn-outs raise children (successful millenial here, were not all spineless and stupid…
)
Op your current gear is fine. Every few thousand rounds, use some copper solvent. Easy enough.
Thanks guys sorry for being angry
I’ve shot more than a few chrome lined barrels without full copper removal with more than good enough results for red dot precision to the point that they are spent.
Just depends on what the application is.