Improved AR15A2/A3/A4 & AR15 Carbine Zero Targets - 50/200M, 100M, & 300M Zeroes

AR/M4 AR General Discussion
21

How important is it to have the center of the target at the same height from the ground as the rifle bore?

22

Not really important at all at the range you’re dealing with. That is unless you’re shooting at some extreme angle, which probably wouldn’t be safe in the first place.

Try to stay within a few feet of difference between the target height and rifle height from ground level and you’ll be fine.

23

Hey THANKS ALOT !!!

24

I feel so neglected… where’s the Zero-target for those of us who want a 37 meter target and only have a 25 yard range to work with?
Guess us misunderstood ones will just have to pick a spot halfway between the 50 and 25 meter zeros.

Oh, and thank you for the work you’ve done, sir.

25

Another great targets.

But please make in YARDS.

EDIT: I guess I could use the Aimpoint targets for BUIS.

26

I used meters because the sights on the AR15 / M16 /M4 rifles are calibrated in meters, not yards.

This being said, you’ll still be fine using these at 25 yards as the difference is negligible.

27

This is very kick-ass, man. Thanks for putting these together.

28

Thanks for posting these, can’t wait to use them. Does anyone on here know how much of an affect over distance that an Aimpoint that sits on top of carry handle will have on a zero? In other words, will it being higher up from the bore make much of a difference? Lets say I zero it with the standard 25m target, will it be zeroed to 300m, or does that only apply to iron sights or optics at the same height above the bore? Thanks for any help.

29

or just convert meters to yards? my range operates in feet so i run the target out to 82 feet (82ft = 27yds = 25m)

or am i missing something here :confused:

30

Good work, thanks for posting them.

31

Just what I was looking for. Thank you.

32

Thank you!
I very much appreciate your time and effort.

33

fantastic post!!! I’ll be using these to zero mine this weekend if all goes to plan (as things rarely do)

34

Thanks so much! These are great. Time to spool up the printer.

I was reading the instructions for the optic zeroing and don’t understand why step 2 states “Adjust optic elevation down 4 clicks (2 MOA).” after you calibrate to center mass?

35

Sweeeeeet! Thanks for your efforts!

Sent from my iPad using Tapatalk HD

36

Very fine work. Thanks much. :smile:

37

Thanks for taking the time to create these, I’m going to use them next weekend to sight in my new RA RUC 16.

38

Awesome man, thanks. Now just to figure out what distance to zero at. Guess I better start searching.

39

Many Thanks Man!!!

40

Thanks a ton!