I have a brand new upper that appears to have a canted FSB - when zeroing the carry handle BUIS, the rear sight is quite a bit to the right. For my own curiosity, what is a good way to see if the FSB is canted besides eyeballing down the top of the rifle?
How many clicks to the right is “quite a bit?”
C4
It’s 26 clicks to the right side from the center indicator.
The best method is to use a very simple round rod, (make sure it’s straight), and make sure it’s about 1/2" or 3/4" diameter, and long enough to reach the FSB from the carry handle.
Place the rod in the top of the carry handle (parallel with the bbl), and run it out to the FSB, and you will get a good idea of what’s going on.
Now ideally, the rod would have a point on it (turned on a lathe), and the actual point should perfectly align with the FSP (front sight post).
This is the best method, which many armorers/smiths use.
DPMS actually sells a rod like this, but it’s so easy to do yourself, (with the exception of turning the point down on a lathe), most guys don’t spend the money.
Here’s a rudimentary way to do a quick check before you buy: lay the rifle upside down on the counter and let it rest on the ears of the front and rear sights. Ideally, all four ears would be in contact with the counter. However, more often than not, you’ll notice a little light showing between one of the front sight ears and the counter. If you see a lot of space between one the front ears and the counter, the FSB is probably canted…or something is machined unevenly.
Good call, you can also do this and try to slide a piece of paper under the FSB ears.