Hi group, I’ve having a difficult time picking an 11.5" 5.56 barrel for an upcoming pistol build. I will admit that I don’t know alot about how the gas port size and gas configuration (middy vs carbine, etc) plays into everything 100%.
I think I’m probably willing to go mid-range pricewise on something like this. I don’t mind getting something a little nicer than Ballistic Advantage if the barrel is definitely nicer. I’ve seen Triarc and Sionics mentioned a bit. Is the Faxon Gunner worth looking at all?
FWIW, I have a Odin O2Lite 9.5" handguard so hopefully that will cover up the gas block in whatever barrel I choose. I will eventually be running this firearm suppressed, but haven’t purchased 30 cal rifle can yet, so I’m guessing an adjustable gas block will be something I will want to get.
This will be just a fun range toy and maybe something I’d take a class or two with.
I used a 11.5" CHF Spike’s FN barrel once for a pistol build with good results. I never ran it suppressed, but it seemed to eat everything I fed it, including cheap UMC 223 ammo.
Can’t go wrong with a DD, Centurion, FN, Colt, BCM 11.5 barrels. Pick one and just go with it. Run an A5H2 as a baseline and tune with your adj. gas block. I had no issues with the Sionics I had for a while either. I don’t think you can go wrong with picking one of the more quality manufacturers out there these days. If you were not running an adj gas block the search would get smaller.
BA Hanson 11.3” has been magical for me. It’s light, but…I’m not running at full auto. With an ALG EMR and SI J-Comp, it feels weightless and nearly recoilless.
With an H buffer, it cycled everything - Federal 55gr 223, Hornady SBR Interlock HD, Speer Gold Dot, and Black Hills 77gr OTM - flawlessly. I haven’t put in my H2 buffer as the above poster suggested.
I have just recently started using a Faxon Gunner 11.5", it is a Middy, but so far using my favorite “lets see if this thing will run” ammo Tula, it runs really well, in addition it runs well with a SiCo Hybrid and not too gassy as either, less then a DD MK18 with the same can, but more than my BCM 14.5"
I know that Middy is a short gas system for a 11.5" and that it does have a larger gas port, and they recommend an adjustable gas block. Unfortunately due to the rail I wanted to use, URX2 Mid, and its not working well with the Mid length gas system, I didnt think about it when I got the barrel, I had to make a gas block fit better, so I had to use a regular Gas Block, and was not able to use an adjustable one; I am not gonna file, grind and sand a $60+ gas block to try something out.
I’m not sure I understood your post in its’ entirety, does your rifle function OK without the suppressor attached, or does it need to be attached for it to operate properly?
I have BCM and Sionics RGP barrels in my 11.5" guns and I wouldn’t hesitate to purchase them again. Like Fledge said, there is no need to tinker with the Sionics, as they did an excellent job of producing a barrel that flat out runs suppressed and unsuppressed.
I have 2 uppers with BCM 11.5’s and one with a Ballistic Advantage hansen profile 11.3. Both of them run flawlessly with and without a suppressor and a standard H buffer and non adjustable gas blocks.
We took a couple SBR’s out yesterday evening because another thread asking for MOA SBR barrels. I was looking for that thread when I cam across this thread. Anyway, we topped off the Sionics RGP 11.5 with a vortex 3-9 just to try groups. It held 1.5 MOA with multiple 5 round groups. Not cherry picked ammo, just reloads with mixed brass.
I have one of these barrels as well and it runs great with a Geissele Super42 H2 without a suppressor. I run it mostly suppressed so installed a BRT .063 HD port insert into a Geissele super gas block and now it’s a pleasure to shoot suppressed with the same buffer setup as well. I wish these barrels weren’t as expensive as they are because they are awesome.
I think shark arms has them for around $300 right now if G&R doesn’t have any. They have some of the cheapest Colt pricing I have seen anywhere. I would suggest a call/email as their website really needs an update, but they are GTG as a vendor
The 11.5" heavy is an awesome barrel, and is now used by a number of law enforcement “agencies.” It cycles better than the 10.3" and the heavy holds upon for suppressed and rapid fire much better than the M4 profile. It is just the right barrel, from an engineering standpoint for SBR functioning, suppressed and unsuppressed. There are opinions on the right gas port sizing. The Colt 11.5" comes at 0.070," which we have found to be ideal. There are arguments that maybe a smidge less is better. 0.063" seems a bit small, but that will depend upon the suppressor and buffer (and gas pressure).
As to pricing, Colt is always going to be more expensive in the 14.5" and shorter lengths. Those lengths are requested by LE customers, shooting enthusiasts and collectors, and they are also not produced in the same numbers as the 16" barrels by Colt, and Colt is much more focused on building full rifles, and not selling barrels and parts, so when your source gets parts, they usually get much less than they ask for, and much later than they expected, so there are chronic shortages of the great parts that many of us want. That leads to purveyors of Colt products a) being out of stock for long periods of time, or; b) having higher prices listed, or; c) offering alternatives (like cut-downs).