Gear prep for first carbine course?

Folks. I am in need of some direction as to what gear is needed/not needed and what to look for/not look for when it comes to gear selection.

I will be taking Jason Fallas basic caribine course near the end of September and am looking at what to use for a belt/pouch/etc system that will make my training experience the best it can be. I don’t want to be ‘that guy’ out there with too much or unnecessary gear but don’t wanna be lacking anything that could be beneficial.

I recently purchased Tactical Tailors duty belt and after getting my hands on it, I realized I didn’t know much about what to put ON the belt! :slight_smile:

I took Falla’s basic pistol course last October and found that having more than a double mag pouch would’ve been handy. I had 10 G22 mags at the course and just shoved a bunch in my Carhartt pants but had to constantly bump mags around for gear management between strings of fire.

Who makes good pouches? How many does a guy need? Is the duty belt I already have something that can be used?

Thanks

I will probably be joining you at the Carbine class - should be a good time.

I always carry my pistol along with my rifle (whether I shoot the pistol or not), so: pistol holster, mag pouches for pistol, minimum 3 rifle mag pouches (enough to hold 3 mags on your belt that is, I will be wearing my body armor which has room for 3 of each), a dump pouch, med kit.

To be quit honest you should not need to much gear on your belt. I will say that with the amount of weight that rifle mags and gear put on your belt I prefer to have some form of suspenders to keep the weight off my hips.

Perhaps some one with more experience in these types of classes will give you better advice, but I am planning on showing up with what I go to work with.

See you there I hope!

Yeah I don’t have any body armor or anything like that.

I’m thinking between 3 rifle mags, a dump pouch (if I get one), and a pistol holster I’m gonna be running out of real-estate quickly! Where does a guy put it all? I guess that’s where chest-rigs come into play…

I think I’ll leave the Glock at home for this class unless there is a real reason NOT to…

From my experience, the guy with the most expensive gear and the most gadgets hanging off of his kit is usually the guy that has no clue how to actually shoot.

First, definitely carry your pistol with at least 2 spare mags for any carbine class. Transitions to secondary are very important.

My advice, and you may take it or leave it, is to carry a belt with at least a holster, double mag pouch for pistol, two mag pouches for carbine, a flashlight and a multi tool. I have a 34 inch waist so that pretty much loads me up. If you plan on having a high round count, I would add a SIMPLE chest rig for added mags. You can practice loading from the chest rig or, like I do, load my belt pouches from the chest rig.
I have a war belt that I can remove items for the type of class I am attending (or teaching). If I am in a pistol class, I can remove the carbine pouch or pouches and add pistol mag pouches.
I hate the feeling of items in side pockets so I just keep a shooting bag or ammo can filled with loaded mags near by to load my pouches from.

I like this chest rig for carbine classes… http://www.skdtac.com/Eagle-Chest-Rig-Universal-SKD-p/eag.567.htm

Check out this thread for a lot of good ideas… https://www.m4carbine.net/showthread.php?t=39159

Double mag pouch further back and a single quick change mag pouch up front, after a mag change consolidate up.

When I started doing classes as a student, like many others on this site I would run a full chest rig with as many as 9 carbine mags and 3 additional handgun mags. That got old quick! Humping that kind of weight all day on the range will flat wear you out. The guys that do it for a living have nothing but my fullest respect.
If you are active duty or LE then taking that full kit to a class and using it is great but I find that a single carbine pouch, a dump pouch for spare carbine/pistol mags and a couple of pistol mags on the belt along with a handgun in a holster works far better for most.

I bring my ammo to just behind the line in a can that I can close and hump quickly to get it out of the way if it becomes needed. In it I keep all my loaded mags as well as the loose ammo. It has proven itself to work well. Typically instructors are not going to have you shoot more than 5-6 mags worth of ammo (assuming double stack here) without breaking for top off.

I accept that most of the time (like 98%) I won’t be rolling around in full kit so I should train with what I keep in the bag in the back of the truck/trunk.

I think reducing the amount of stuff you are carrying will better serve you than full kit unless you just want to look cool. Again active/LE is different.
That being said there are many good manufacturers that are doing good kit. Look through some of the AARs written up detailing what gear was used. Your Tactical Tailor belt will work out just fine. What kind of retention are you looking for in ammo pouches? Flaps to cover?
I typically run open top pouches that have either screw tension adjusters or built-in tension in the pouch. I had a buddy make me up some kydex for the Glock and AR that are working really well so far. He should be putting some more stuff out on the market soon. I will be upfront in saying that I am partnering with him to get his product out into the hands of shooters that need good gear.

Currently when I teach, I run a single pistol mag and carbine mag with the pistol on my belt. For classes where I am a student or AI, I use the rig stated above.

My belt is a Wilderness Tactical Instructor belt with holster and mag pouches that my buddy made at Spectre Koncealment Systems.

I took Jason’s Advanced carbine class last August (you’re in for a great class, by the way), and ran the entire class pretty slick with two pistol mags and two rifle mags on my belt, and one in each gun (obviously). One of the things you’ll find about Jason is he is accuracy-oriented, meaning drills are not just a big mag dump every time. I had no trouble making it through any of the drills with that set-up.

As far as what to run - I run kydex mag holders. For my competiton and class purposes, they retain magazines very well even when moving/rolling around, and they are low profile. I use the same pistol mag holders I use for conealed carry every day. Fast mags and HSGI tacos are pretty nice too. I had a Tactical Tailor belt that I got rid of a few years ago, and went to an Ares Ranger belt. It is just as stiff, and it fits in my belt loops on my pants, so it doesn’t ride up like some other wider belts will. The only down side is that you are walking around with holsters/mag holders on even when you leave the range unless you take the time to take everything off. No big deal, but that is a nice benefit of a belt the goes “over the top” of everything like a Tactical Tailor.

Have a great class. Jason is an excellent instructor, and I’m sure you will learn a ton.

Contact Jason and ask him.

:thank_you2:

Thanks and I checked out that thread. A few rigs looked like they could be geared toward what I would ‘need’. Most appeared to be mil/LE rigs with what look like fairly elaborate setups…

This post looks like something I might try and model something after

The belt rig in the top pic of this post looks promising as well…

Hey, Mr. Cool Belt! :slight_smile:

Figured I would pick a few brains here before bugging the guy…again…

Thanks for the reply. I did take his Basic Pistol last year and will be attending his Tactical Pistol in May.

So the main reason you shook the TT duty belt was due to it ‘riding up’? Like you said, I do like the idea of just unbuckling the belt and having everything off.

Do you have a pic of your TT setup before you sent it down the road?

I’ll see if I can dig one up. I ran the belt a few years ago in a Magpul Dynamics class, and it just kept riding up on me. I tried securing it to the belt I had on underneath with some velcro straps, but they didn’t hold for long.

A good friend of mine just purchased a nice VTAC padded belt that he started running last weekend. He is very pleased with it, and it seemed to stay put pretty well during our 3 hours on the range. Might be something worth looking in to. I like the Ares belt because it is a great belt, and I can wear it every day for concealed carry. But depending on his results, I may look into one for classes, competitions, and instructing.

I think this is good advice. The last carbine course I took was a 3-day, 2000 round course with lots of pistol transitions. Emphasis was on accuracy, but lots of it. I had two AR and two pistol mags on my belt and four AR mags on a simple chest rig, and I was glad I had every one. A (relatively) small dump pouch is very useful. I didn’t need a flashlight because it was daylight, I didn’t need a multitool because the last thing that that instructor would allow is someone using tools to fiddle with their rifle on the shooting line. IFAK? Jason will have a first aid kit. Don’t load yourself down with crap that won’t further the task at hand…training.

My gear is relatively simple. A TT MAV chest rig, padded TT belt, EMDOM pouches for the chest rig and FastMags for the belt. BladeTech holster and pistol mag pouches.

Any photos of your setup? Simple sounds good to me!

Orange search button reveals 10 pages of this stuff. Enjoy.

https://www.m4carbine.net/gtsearch.php?cx=003496919632624929056%3Adhiwgm0hbaa&cof=FORID%3A10&ie=UTF-8&q=gear+for+a+carbine+course&siteurl=www.m4carbine.net%2Fshowthread.php%3Ft%3D96079

And I had searched but focused more on if my TT belt was purchased in vain or if it could still be utilized in this aspect. I will re-read some of the linked threads though…

If you wanna stay on a simple end… I would say a kydex holster, 2 pistol mag pouches( I run single mag pouches so I can add and remove as needed) and at least 2 rifle mag pouches. I also run a chest rig as others have stated. I kept it on the cheap end and got a 5.11 chest rig and mag pouches for 40 shipped in the for sale section but I believe if would be like 60 bucks shipped for it all on their website. I also tend to have a camelback for water. And knee caps. Sped the rest on ammo and get used to the gun before hand.
Keep an open mind and take in what is taught.

Sorry for the out-of-focus quick iPhone snap, but you get the idea…

The TT MAV has an X-harness attached. It’s more comfortable than the standard straps, but does tend to be hotter to wear and it’s a little cumbersome to put on and off quickly. OTOH, the course I last used it for was in the fall in Minnesota, so hot wasn’t an issue, and I don’t need the thing to be quick to take on and off. I prefer a beer-can grip on the mags so I have the belt mags bullets-rearward. The TT pad on the TT belt is very comfortable and keeps the belt from riding up and down. The dump pouch is a Mini Roly Poly, so folds up nice and small when not in use. The BladeTech holster has a drop-offset attachment because I like the pistol to sit lower. For a pistol course, I remove the FastMags and replace with another Blade-Tech double pistol mag pouch. The FastMags for AR mags work great on the belt, but don’t fit well side-by-side on the PALs webbing, so I use the kydex-insert EMDOM pouches (elastic is cut off because otherwise they hold the mags a little too tight for me). This rig has worked well for me for what I need it to do. It’s simple, and (relatively) cheap. The TT belt pad isn’t really necessary, I suppose, but it’s comfortable. That belt is nice and rigid. If you add that TT pad to a TT belt, you’d likely have to size up on the belt. If you already have the TT belt, you could probably skip the pad and see how the whole thing works for you as-is. There is an advantage to skipping the pad…the Tactical Tailor Duty Belt has an inner strip of Velcro, so if you wear a velcro inner belt to keep your pants up, like the $15-$20 Uncle Mike’s Inner Duty Belt, it will secure that TT duty belt over it very, very well and keep it from shifting around.

Jeff Gonzales’ mantra is “the mission drives the gear”. My mission over that particular 3 days was training.

We have “first class” threads out the wazoo AND a ginormous 3+yr-old “first line belt” thread stickied in the Tactical Gear subforum.