I’m building a new lower and was wondering if I should go with a G&R full lpk or put a standard lpk in my lower and add the Spikes battle trigger.It is for home defense and hunting.Any input would be appreciated.Thanks.
I would stick to G&R.
DD LPK & KNS hammer/trigger pins.
I personally would go with the Spike’s, especially since it’s nickel boron coated. It’s a notable difference over a non-coated LPK, very smooth with a nice clean reset. I’ve never really been one to fix what is not broken. However, after receiving a coated LPK on my second LWRC, I swapped the rest of my rifles over with a combination of Spike’s and LWRC NiBoron LPK’s. I like them that much.
I’m finding that Spike’s has sort of a mixed following on this forum. I personally have had good success with their products. I am currently running one of their nickel boron BCG’s in a BCM 11.5 CHF upper. I will concede that it’s a fairly new build, but it has run 100% thus far. My brother is also currently running one in his M4 over in Afghanistan, with superb success. He has roughly 1K rounds on the 2-way range, much of it select fire, with 100% reliability.
I will admit that you don’t “need” nickel boron coatings on a quality AR, but they certainly are nice. If given a choice to purchase a new item with or without NiBoron , I’ll always go with. FWIW…
This or go with the Spikes.
G&R LPK with a used GSSA, or the PSA DD LPK with GSSA Packages. Both are absolute deals, and you end up with a fantastic trigger on a solid LPK.
Spikes sells a really nice enhanced lpk that includes their battle trigger, with a billet trigger guard, and some other nice enhancements, including the KNS pins. Seems like the best way to go, because it is 1 stop shopping. I was just looking into it this morning, as a matter of fact, but unfortunately they list it as being out of stock.![]()
+1 you’ll like it, and then you’ll want the BCG, too. Would not be surprised if in five years, it would be a low end gun that doesn’t have it.
Spikes…
I’ll offer up something different.
buy a DD LPK, install and try it out, I’ll bet you dont add anything different to it. I have a Colt LPK w/GSSA installed and the DD feels every bit the equal. Both set-ups work very well off the bench on my hunting rig also.
From everything Ive heard, G&R’s LPK as as good or better than the DD’s ones I have experience with.
Or, my solution: G&R LPK without the hammer, trigger, disconnector and associated springs and pins, and Spike’s Battle Trigger.
Benefits of everything, no downsides. ![]()
Some thoughts on LPK’s.
There are only two TRUE mil-spec LPK’s. Those are Colt and FN’s. Everything else is a third or fourth best.
With that said, we use only the best parts we can find. A good many of these parts are made by LMT (FYI).
C4
Thanks for all of the replies.I decided I am going to build 2 new lowers now.One with a full G&R lpk and the other with a psa lpk with the spikes battle trigger.
I read once that the spikes LPK were based on DPMS parts?
I also forgot to mention that I wanted to spend no more than $100 for the lpk.
They no longer use DPMS but I am not too sure what they use currently.
:rolleyes:
My vote is for the G&R. I like it on my bcm build. Good quality components. I can’t tell any difference between it and my stock colt lower.
I went with the G&R LPK. You can tell they have good , quality parts. No complaints with mine whatsoever. However, from the people I’ve spoken with, I’ll go with Spikes on the next LPK.